• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.55-61
• /
• 2004

Leading front of a lifted diffusion flame in turbulent mixing layer was investigated in order to find a appropriate definition of the turbulent edge propagation speed. The turbulent lifted diffusion flame was simulated by employing the flame hole dynamics combined with level-set method which yields a temporally evolving turbulent extinction process. By tracing the leading front locations of the temporal flame edges, temporal variations of the liftoff height, local flow velocity, and edge propagation speed at the leading front were investigated and they demonstrated the flame-stabilization condition of the turbulent lifted flame. Finally, a turbulent edge propagation speed was defined and its temporal variation from the simulation was discussed.

• Journal of Power System Engineering
• /
• v.2 no.2
• /
• pp.13-19
• /
• 1998

The purpose of study is to investigate the flame stability and Structure of turbulent diffusion flame behind the hollowed flame holder, which is located on the waste gas coming out from the test furnace. Fluctuating temperature and ion current measurement and their statistical treatment were used for the purpose. Three types of flame were stabilized and each of which were changed by adequate equivalence ration. And we found that have no periodicity near reacting zone.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.47-58
• /
• 2000

The relationship among the flame radiation, NOx emissions, residence time, and global strain rate are examined for turbulent non-premixed jet flames with wide variations in coaxial air conditions. Measurements of NOx emission, flame geometry and flame radiation were made to explain the NOx emission scaling based on global parameters such as flame residence time, global strain rate, and radiant fraction. The overall 1/2-power scaling is observed in coaxial air flames, irrespective of coaxial air conditions, but the degree of deviation from the l/2-slope curve in each case differs from one another. From the comparison between the results of pure hydrogen flames and those of helium diluted hydrogen flames, it is observed that flame radiation plays a significant role in pure hydrogen flames with coaxial air and the deviation from 1/2-power scaling may be explained in two reasons: the difference in the flame radiation and the difference in jet similarity in coaxial air flames. From the radiation measurements, more detailed explanations on these deviations were suggested.

• 한국연소학회:학술대회논문집
• /
• 2001.06a
• /
• pp.60-66
• /
• 2001

Combustion using pure oxygen instead of air is an energy saving technology that can increase thermal efficiency by the improvement of burning rate and ultra high temperature flame, being used on the industrial spot. But information about it is not so enough yet. Flame figure, temperature distribution and emission concentration were measured with oxygen excess ratio and swirl number in a turbulent diffusion flame to investigate the combustion characteristics using pure oxygen. The results showed that flame figure became different as long as oxygen excess ratio varied and that concentration of NO and CO increased suddenly around ${\lambda}$=1.5.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.22-28
• /
• 1999

The purpose of this study is to investigate the NOx emission of turbulent diffusion flame formed in the after burner, which is located on the waste gas coming out from the test furnace. Three types of flame was tested and each of which was changed by adequate equivalence ratio. It is necessary to study more about NOx reduction effect in the after burner system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.3
• /
• pp.328-334
• /
• 1983

The turbulent hydrogen-air diffussion flame was studied experimentally and theoretically. Laser Doppler anemometer was used to measure the velocity field in the flame. Two mathematical models for the combustion reaction term, which are infinite rate model and finite rate to be derived eddy break-up model, were tested by comparing predictions with experimental data for coaxial turbulent diffusion flame. The agreement between the predictions and the data is, on the whole, very good in the case of employing the finite rate model rather than the infinite rate model. But, it was shown that the finite rate model was practically applicable to the predictions of the turbulent diffussion flame structure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.492-501
• /
• 1994

This study is an analysis of the turbulent diffusion flame with swirl flow and the calculated results are compared with experimental data in case of various swirl numbers and air-fuel rations. The mathematical model is restricted to single-phase, diffusion controlled combustion with swirl flow. Values of local flow properties were obtained by solving appropriate differential equation for continuity, momentum, stagnation enthalpy, concentration, turbulence energy, dissipation rate of turbulence energy, and the mean square of concentration fluctuation. The method is proposed for calculating the local probability of chemical reaction based on the use of the probability density function for the mixture fraction.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.803-810
• /
• 2017

the liquid oxygen transitions to a supercritical state, causing rapid changes in properties and pseudo boiling in supercritical combustion. the combustion reaction operating in a supercritical state depends on the turbulence diffusion caused by difference of density, therefore, a study of the diffusion flow and pseudo boiling is required. Many researchers have studied these phenomena in the supercritical combustion, but A case study by various variables is inadequate. In this study, the flow field and flame structure were investigated numerically by changing the recirculation flow and liquid oxygen core length through oxygen-fuel ratio(O/F), combustor diameter and recess ratio at supercritical pressure condition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.22-31
• /
• 1997

We developed a general purpose program for the analysis of flows in the combustor with recirculating flow regime and simulated the flows. The program uses non-staggered grids based on finite volume method and the primitive variables are cartesian velocities. The combustion model is irreversible one step reaction with infinite chemistry The Favre averaged governing equations are considered and the clipped gaussian distribution is considered as a probability density function of the conserved scalar. We calculated turbulent diffusion flame with recirculating flow regime. Simulation shows two recirculating regions like experimental results. Velocity, turbulent kinetic energy, temperature and concentration distribution in simulation agree well with experimental data.

• Journal of the Korean Society of Combustion
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1998

The flame stabilization and the combustion characteristics of diffusion flame formed in the wake of a cylindrical bluff body with fuel injection are studied. With the turbulence generator, the flame stability limits and ion currents were measured and analyzed. The results from this experimental study are summarized as follows. The region with highest average value of ion currents in the middle of flame is moved to the upstream side by the turbulent components of main stream. The flame mass with partially active reaction is moved fast for uniform flow and turbulence generator G3, but the flame mass with relatively slow reaction is moved slowly for turbulence generator G1. If the turbulence generator with strong turbulent component is installed, the turbulent time scale is increased with movement from main stream side to recirculation zone as well as the flame stability limits is deteriorated. Though the special dominant frequency is not appeared in the eddy which exists in flame, high frequency characteristics are appeared in uniform flow and turbulence generator G3, and low frequency characteristics are appeared in uniform flow, turbulence generator G3 and G1.