• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.237-242
• /
• 1991

Shape rolling has been studied experimentally by many researchers. As large numbers of process variables are involved and the material flow is difficult to analyze in shape rolling, the use of numerical techniques as an engineering tool becomes extremely attractive. The first numerical approach to the three-dimensional plastic deformation of rolling was to investigate side spread in flat rolling. Oh and Kobayashi conducted a pioneering study in this field by applying an extremum principle for rigid, perfectlyplastic materials combined with the numerical computation. Since then, several other researchers have used three-dimensional finite element method for analysing spread in rolling . In this investigation of shaperolling al the computer simulations of shape rolling were conducted using TASKS. To verify the predictive capabilities of TASKS the first example chosen was square-to-round shape rolling

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.251-255
• /
• 1991

The primary objectives of the rolling process are to reduce the cross section of the incoming material while improving its properties and to obtain the desired section at the exit from the rolls. Many engineering metals, suchas aluminium alloys, copper alloys, and steels are often cast intoingots and are then further processed byhot rolling into blooms, slabs, and billets, which are subsequently rolled into other products such as plate, sheet, tube, rod, bar, and structural shapes. In shape rolling a round or square bar is rolled in several passes into various shapes. During eachpass, the bar elongates as well as spreads. Thus, a very complex three-dimensional metal flow takes place. In this paper TASKS results for the simulation of a 7 pass square-to-round shape rolling are presented. The results are verified by comparing it with experimental results from a previous study conducted at the Battelle Columbus Labs

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.147-152
• /
• 1997

This paper presents a method for measuring and analyzing strains in sheet metal forming by stereo vision system. A better understanding and evaluation of the formability can be achieved by analyzing stain distribution in deformed sheet metals. By means of image processing technique, it is possible to get strain distribution efficiently. For measuring strain automatically and accurately, algorithms for camera calibration, grid detection, stereo matching and strain analysis has been developed and verified by experiments with GUI(Graphic User Interface).

• 소성∙가공
• /
• 제8권5호
• /
• pp.454-464
• /
• 1999

A new blank design method is proposed to predict the optimum initial blank shape in the sheet metal forming process. The rollback method for blank shape design takes the difference between the deformed blank contour and the target contour shape into account. the minimization object function R is proposed. Based on the method, a computer program composed of blank design module, FE-analysis module and mesh generation module is developed. The rollback method is applied to square cup, reentrant cross section, L-shaped cup drawing process with the flange of uniform size around its periphery to confirm its validity. The optimum initial blank shape is obtained from an arbitrary blank shape after several modifications. Good agreements are recognized between the numerical results and the published experimental results for initial blank shape and thickness strain distribution. It is concluded that the rollback method is an effective and convenient method for an optimum blank shape design.

• 소성∙가공
• /
• 제6권4호
• /
• pp.319-328
• /
• 1997

A flow stress involving strain, solid fraction, and breakage ratio, and solid fraction updating algorithm were proposed to depict the deformation behavior of materials at the semi-solid state. In case of isothermally simple upsetting of Sn-15%Pb alloy at the semi-solid state, by comparing the results of finite element analysis with the existing experimental results, the reliability of both the developed flow stress and updating algorithm were investigated. It was found that the verified program can effectively be used in the rigid-viscoplastic finite element analysis of the semi-solid forging processes.

• 소성∙가공
• /
• 제1권1호
• /
• pp.52-65
• /
• 1992

In this study a new simplified three-dimensional numerical method and the associated computer program have been developed to simulate the non-axisymmetric extrusion processes. The two-dimensional rigid-plastic finite element method under the generalized plane-strain condition is combined with the slab method. To define the die geometry for a non-axisymmetric extrusion. area mapping technique was used. Streamlined die surface was used to minimize the total extrusion pressure. Extrusion of square, hexagonal and 'T' section from round billet have been simulated and experimented with a model material. The computed results were in good agreement with the experiments in cross-sectional grid distortion. Computational results will be valuable for designing tool geometries and corresponding processes.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2001년도 춘계 학술발표논문집
• /
• pp.179-180
• /
• 2001

1. 실험목적 : 벼 휴립건답직파재배시 절수재배에 알맞은 질소 수비량을 구명하고자 함. 2. 재료 및 방법 가. 공시품종 : 동진벼 나. 공시토양 : 전북통(미사질양토) 다. 물관리방법 : 3엽기부터 완전낙수기까지 5일 간격 고랑관개 라. 처리내용 -파종량(kg/ha) : 60, 100 -질소 수비량(kg/ha) : 24(50% 감비), 48(표준), 75(50% 증시), 96(100% 증시)(중략)

• 한국전문물리치료학회지
• /
• 제5권1호
• /
• pp.51-62
• /
• 1998

Conversion disorder is defined as a specific and enduring sensorimotor dysfunction that contradicts known neurological or musculoskeletal pathology or physical findings. The patient with conversion symptoms unconsciously adopts these symptoms to convert their psychological stress to a physical phenomenon. Conversion disorder often involves the mimicry of organic symptoms similar to those experienced by a relative or an acquaintance. Because conversion symptoms are produced by psychological stress, specific treatment strategy and reinforcement program are needed for treatment. Treatment comprises avoiding unnecessary medical tests and removing symptoms by using graded exercises given by physical therapists. Clinical therapists must maintain a continuous and detailed follow-up to completely recover from conversion symptoms. The goal of treatment is to emphasize health rather than disease, to resolve physical symptoms, and to prevent recurrence. This study looks into the case reports of 4 patients diagnosed with conversion disorder.

• 소성∙가공
• /
• 제3권4호
• /
• pp.440-453
• /
• 1994

The multi-stage deep-drawing processes including normal-drawing, reverse-drawing, and re-drawing are analyzed by use of the rigid-plastic finite element method. Computational results on the punch/die loads and thickness distributions were compared with the experiments of the current drawing processes. Deep-drawing processes of the redesigned shell to improve the specific strength and stiffness were simulated with the numerical method developed. With varying several process parameters such as blank size, corner radii of tools, and clearances, the simulation results showed the improvements in reducing the forming loads. Also forming defects were found during simulation and appropriate blank size could be verified.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.2970-2981
• /
• 1993

In hot closed-die forging the load increases rapidly near the final stage. Preforming operation is important to both the sound final forging and die-service life. In this study, the material flows during preforming and final forging are investigated. The physical modeling with Plasticine as a model material showed clear flow patterns. The forging process were numerically simulated by the finite element method with the isothermal and the non-isothermal models. The flow patten of the isothermal simulation showed good agreements with the experiments. Temperature changes and pressure distributions on the die surfaces during one cycle of the forging process were obtained from the non-isothermal simulation. High pressure and temperature were developed at certain areas of the die surfaces. It was concluded that those areas usually coincide with each other and should be distributed by the preforming operations to enhance the die life.