• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2017

Brake squeal noise has been a challenging problems for a long time. It is very annoying to passengers and residents near tracks. Two methods have been applied to reduce or eliminate brake squeal noise. One is to improve frictional materials; the other is to optimize the topology and structures of brake pads. In this study, we developed two kinds of brake pads; one is a pad whose frictional material is different from the KTX brake pad friction material; the other is a flexible pad that has the same frictional material as that of the KTX brake pad, but a different structure. Squeal noise and friction coefficients were measured and analyzed using a full-scale brake dynamometer. It was found that the dynamometer test can simulate the squeal noise of KTX trains at stations. The squeal frequency of the KTX at 4500Hz was exactly reproduced; this value of 4500Hz was one of the natural frequencies of the KTX brake disc. It was also found that the squeal noise depended on the caliper pressure, initial disc temperature and braking speed. The average friction coefficient was 0.35~0.45. The new pad lowered the squeal noise by 17.3~21.6dB(A).

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.183-191
• /
• 2010

The phase changes of 1-palmitoyl-$d_{31}$-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC_$d_{31}$) bilayers distorted by an antimicrobial peptide, a magainin 2 or an aurein 3.3 were investigated by using $^2H$ solid-state NMR (SSNMR) spectroscopy. From the theoretical simulation of the experimental $^2H$ solid-state NMR spectra the geometric structure constants and the lateral diffusion coefficients were obtained in the peptide-lipid mixture phases. Within five days of the peptide action on the lipid bilayers only the distorted alignment of the bilayers were measured but after 100 days an elliptic toroidal pore structure and an inverted hexagonal phase were formed in the presence of magainin 2 and aurein 3.3, respectively. In order to investigate the effect of an anionic lipid molecule on the actions of two peptides on the lipid bilayer, the same experiments were performed on the POPC_$d_{31}$/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) bilayer and the significant differences in the actions of two peptides on two bilayers of POPC_$d_{31}$ and POPC_$d_{31}$/POPG were measured.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

Four developed patents have applied for a new type of Composite Cyclone Scrubber followed by the previous research (Cho and Kim, 2017), including dust reducing fan with filters. Regarding target installation and maintenance cost, 64% reduction for investment costs (6.2 billion won vs. 17 billion won) compared to existing road pollution reduction system, while social benefit costs increase by 43% compared to existing road pollution reduction measures (72.6 billion won vs. 50.8 billion won). The composition of the device is an air blower type spiral guide vane, and an injection pressure collecting dust efficiency. A nozzle varies Injection angle and contact range, spray liquid species (waterworks, salty water). The proposed patent tests are circulation water Time-by-Time Spray and collected 41.4% more increased micro dust since the sprayed water meets contaminated gas due to the 45° degree colliding, which is 141% increased conventional dust collector. (Ratio of collection over 85%). As regards the source of collection liquid, circulated rainwater and well water, we expect a huge amount of energy and economically saved eco-friendly system in our patent. Finally, the guided vane and metal filter reduced over 90% micro-dust, while sprayed water cleans the vane and filters, resultantly minimizing the maintenance budget. The preliminary evaluations of the developed design make it possible to reduce not only cheaper maintenance budget due to the characteristic water spraying but the cost of water comes from mainly rain and underground.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.4
• /
• pp.393-400
• /
• 2020

Axial and lateral behavior of helical piles is generally influenced by number, diameter, helix pitch, and locations of helices. In this study, axial and horizontal behavior of helical piles with three helices was investigated varying helices' locations, diameter, and pitch. Especially, due to the spiral shapes of helices, the effect of lateral load directions at pile heads on their lateral behavior was investigated. Axial load test of small-scale helical pile was conducted in laboratory, and its results were compared with numerical analysis results of the same model for cross check of validity of both results. Furthermore, diverse numerical analyses were performed for different shapes of helical piles. Consequently, it was found that, for the given analysis conditions, the helix diameter was the most influential factor on the horizontal and vertical behavior of helical piles.

• Journal of Gifted/Talented Education
• /
• v.17 no.1
• /
• pp.193-213
• /
• 2007

We present a creative program model for encouraging the creative ability of gifted students by using overlapped patterns found in every day life. This model is based on the basic concept that the purpose of physics education is enlightenment from around the world. Combining both the Western perspective of creativity as productivity and the Eastern perspective of creativity as enlightenment, a Program for Enlightened and Productive Creativity(PEPC) for teaching inquiry was devised. This Program for Enlightened and Productive Creativity describes stages through which a student is guided to solve a problem using increasingly complex observation, inquiry, and experimentation. The use of this model in teaching is illustrated through a physics lesson of moire patterns using overlapping patterns found in our every day life. A case is made that PEPC can be applied to teaching general students as well as gifted students and in different content areas. PEPC model is applied to general students in middle school, scientifically gifted students and physics teachers.

• Composites Research
• /
• v.15 no.4
• /
• pp.17-22
• /
• 2002

Small diameter composite helical springs (CS) are developed using a hot plated mold for reinforcement of common optical fiber jumper cord (OJC). The outer diameters of the springs are about 2 ~ 3mm. These springs are inserted into the OJC to protect the damage of an optical fiber from the sudden lateral load. Two types of CS, Yarn type (Y-type) and Band type (B-type), are manufactured to compare the effectiveness for the damage protection. The experimental works were conducted to check the effect of the CS covered around OJC on the mechanical and optical properties. Experimental observations show a considerable effect on the flexural resistance, hence slowing down the deterioration of the optical power by the internal damage of the fiber. Obtained main results are as follows: (1) Y-type CS has better protection abilities to lateral loading than B-types. (2) Compared with bare OJC, CS-OJC has less power loss under the loading. (3) OJC covered with the composite coil spring has a possibility for a practical usage with full fruits.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.449-457
• /
• 2013

In this study, we performed a numerical analysis to investigate the effect of rotation on the blood flow and arterial wall behavior by using the FSI (fluid-structure interaction) technique. The geometry of the artery included 50% stenosis at the center. To simulate the rotational effect, 2-6 rps of axial velocity was applied to the arterial model. A spiral wave and asymmetric flow occurred due to the stenosis and axial rotation both in the rigid body model and in the FSI model. However, the arterial wall motion caused periodic and transient blood flow changes in the FSI model. The FRZ (fluid recirculation zone) decreased in the FSI model, which is a known predictor for the formation and vulnerability of plaque. Therefore, it is observed that arterial wall motion also influences the generation of the FRZ.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.5-17
• /
• 2011

Sampling disturbance can often introduce considerable errors in the laboratory estimation of geotechnical properties of soils. Accordingly, it causes inappropriative results in analysing field behavior. Therefore, a screw plate load test, one of in-situ test technique, is developed in this study, because in-situ testing techniques have advantages for the estimation of reliable geotechnical parameters. The screw plate load test, which was modified from the plate load test, conducts an experiment underneath ground by inserting a spiral type of auger screw. In this study, the structure and characteristics of the screw plate load test device are introduced in detail and the reliability of the device is examined through the analysis of the laboratory test results.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1015-1026
• /
• 2023

The confluence of rivers, where rivers meet, is a place known for complex water mixing dynamics. Sometimes, these rivers flow downstream without mixing. While this non-mixing can pose challenges for water quality management, it also offers the potential for improved water extraction in nearby water intakes (Chilseo). In this study, we analyzed the mixing dynamics at the confluence of the Nakdong River and the Nam River using drone imagery, water quality indicators like Electrical Conductivity, and hydraulic factor Secondary Flow. We found that meandering effects hindered mixing, as shown by the comparison of Secondary Flow and Electrical Conductivity distributions. Additionally, the Chilseo Water Purification Plant downstream of the Nakdong River-Nam River confluence extracted unmixed Nam River water during certain periods.

• Korean Journal Plant Pathology
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1986

Negatively stained dip preparations from Euonymus showing vein clear symptoms revealed bacilliform particles. The particles tentatively referred to as the Euonymus vein clear virus(EVCV) have a relatively complex structure, measuring 230-280nm in length and 70-80nm in diameter. They have an envelope, 8-10nm thick, provided with evenly spaced beadlike projection about 5-6nm long. The inner tubular core which had no envelope showed helical structures, 200-220nm long, and 50-55nm in diameter. This inner tubular core is interpreted as the virus nucleocapsid. A striking association of virus particles with the nuclei of infected cells was apparent from sections which showed numberous virus particles at the nuclear periphery and in what appeared to be intranuclear virus particle inclusions. Careful examination of these apparent inclusions revealed the presence of the nuclear envelope surrounding them, in addition to cytoplasmic organelles within them. Such profiles were interpreted as having arisen when the sections passed through invaginations of the cytoplasm into the nucleus. In all the sections showing virus particles associated with the nucleus, large number of virus particles were found to be present in expanded areas between the two lamellae of the nuclear envelope. This location is suggested as a possible site of virus assembly. Serveal micrographs of particles found in this location suggested incorporation of the inner lamella of the nuclear envelope into the viral envelope. Various micrographs indicated a possible helical arrangement of certain components present in the virus core.