• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.893-898
• /
• 2014

A direct pulsed laser process for welding and networking silver nanowires was developed. The welded nanowire network demonstrated modified electrical properties in a transparent substance. In particular, the welding points on the nanowires were investigated to measure the resistance at the connections. The level of networking in nanowires was explored with respect to various laser pulse widths and average power densities. In particular, the influence of laser beam density was investigated in detail. Selective laser treatment can be advantageous in imparting customized local property changes in transparent conducting materials. Various applications of the process are also discussed in this paper.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.235-236
• /
• 2009

금속 아세테이프가 금속으로 열분해하는 반응을 이용하여 템플레이트 안에 잘 정렬된 금속 나노 구조물을 얻는 것은 센서 (sensor), 분리 막(separation), 저장 장치(storage), 에너지 전환 장치 (energy conversion)에 응용이 가능하다. 실버 아세테이트와 팔라듐 아세테이트에서 순수 실버와 팔라듐 나노 구조의 제조 및 형태의 차이를 밝히는 것을 목적으로 나노 입자의 크기와 활성화 에너지가 이에 영향을 주는 것으로 확인할 수 있었다. 금속 나노 구조의 확인 및 나노입자의 크기와 활성화 에너지를 분석 관찰하기 위해 DSC, TG, XRD, FE-SEM 등을 이용하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.475-475
• /
• 2011

현재 수열합성법으로 이용하여 1차원으로 수직 성장한 ZnO 나노와이어는 밴드 갭이 3.37ev로 큰 밴드 갭을 갖는 물질이며 밀도 조절이 매우 어려운 것으로 알려져 있다. ZnO 나노와이어는 기존의 리소그래피 기반을 둔 Top-Down 방식과 달리 자발적인 형성과정으로 높은 결정성을 가지게 되는데, 이는 ZnO 나노와이어가 큰 종횡비 와 전자친화도를 가지고 있어 높은 전계방출 효과를 기대하게 되는 부분이다. 본 연구에서는 실버를 열처리하여 형성된 실버 나노파티클을 마스킹층으로 사용하여 ZnO 나노와어의 밀도 조절을 하고자 하였다. 실버막을 AZO seed layer 기판 위에 증착한뒤 $200{\sim}600^{\circ}C$ 까지 열처리 후 수열합성법을 이용하여 ZnO nanowire를 성장하였다. 또한 전구체인 ZN(NO3)2${\cdot}$6H2O 와 HMT 에 각각 Ammonium chloride와 PEI를 첨가하였고, PEI 의 몰농도를 변화하여 성장된 ZnO 나노와이어의 구조적, 광학적 특성을 평가함으로서 전자소자 적용 가능성을 확인하였다.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.200-205
• /
• 2016

A drug transport carrier could be used for safe send of drugs to the affected region in a human body. The chitosan is adequate for the drug delivery carrier because of adaptable to living body. The gold, a metallic nanoparticles, tends to form a nano complex at rapidly when it combined with chitosan because of its negative charge. having energy from the other, outer gold nano-complex make heat due to its property to release the contained drugs to the target area. Silver could be also formed an useful biocompatible nano-composites with chitosan which should be used as an useful drug transfer carrier because its special ability to protect microbial contamination. Being one of the oxidized nano metals, $Fe_3O_4$ is nontoxic and has been used for its magnetic characteristics. In this study, the control of catalyst, reducing agent, and solvent amount. The chitosan-$Fe_3O_4$-gold & silver nanoshell have been changed to form about 100 nm size by ionic bond between the amine group, an end group of chitosan, and the metal. It was observed the change in order to seek for its optimum reaction condition as a drug transfer carrier.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.107-112
• /
• 2022

In this study, a silver paste capable of UV curing without using any solvent was developed. The viscosity and viscoelasticity of the silver paste developed as a solvent-free type were measured. And after printing the pattern by screen printing, an electrode coating film was formed by UV curing. Conductivity, pencil hardness, and adhesive force of the formed electrode coating film were evaluated. Finally, the curing characteristics of the electrode coating film were evaluated by TGA and FT-IR. Summarizing these results, in terms of conductivity, adhesion, and curing characteristics, it was found that Paste (4), that is, silver paste obtained by mixing 1.2 ㎛ spherical silver powder and 50 nm silver powder at 72:8% had the best physical properties.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1716-1717
• /
• 2011

잉크젯으로 인쇄된 실버 나노입자가 오븐, 레이저, 전기를 이용한 소결방법에 의해 소결되었다. 전도성 라인은 드롭 온 디맨드형(drop-on-demand) 잉크젯 프린터에 의해 유리 기판 위에 인쇄되었다. 레이저를 이용한 소결은 레이저 강도와 조사시간을 변화시키면서 실버나노입자를 소결하였고, 전기 소결은 인쇄된 라인에 정전류 방식을 이용하여 인가해주는 전류값을 변화시키면서 소결하였다. 소결방법에 따른 비저항변화, 단면적 변화, 미세구조변화를 관찰하였고 이 결과를 오븐 소결 결과와 비교하였다. 전기를 이용하여 소결하였을 경우 가장 낮은 비저항을 얻을 수 있었고, 은의 고유 비저항에 비하여 1.7배 큰 비저항을 얻었다.

• Clean Technology
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2015

Utilized in a variety of electronic components, electronic components industry with metallic ink technology was established itself as a major technology research and development was gradually increasing, silver ink that is excellent in conductivity and stability, have long been used in the industry of electronic components in recent years and silver ink has been the size of nanoscale particles dispersed by developing display, an electronic tag, a flexible circuit board or the like used in the semiconductor and electronics as has been highlighted in, however industry modernization of equipment by increasing the production and consumption of products generated during the production process and environmental pollutants by use of waste products is expected to bring a serious environmental problem. In this study, prepared by a wet reduction method, the manufacturing process of the silver nano-ink to the entire process of the environmental impact assessment (LCA) was evaluated using the techniques. Life cycle assessment software GaBi 6 was used as received from the relevant agencies of the silver nano-ink data with reference to the manufacturing process, building inventory was international organization for standardization (ISO) 14040, 14044 compliant LCA conducted over four stages.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.35-40
• /
• 2022

In this study, the average particle size of silver powder was 2㎛, 7㎛, and a mixture of these (50:50wt%), three kinds of silver pastes were prepared. In addition, as a result of examining the viscosity and viscoelasticity of the three silver pastes, TGA measurement, resistance change according to strain, and change in surface structure of the electrode, the following conclusions were obtained. Summarizing these results, it was found that it is most desirable to have a particle size of about 2㎛ in order to minimize the change in resistance due to strain.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.975-982
• /
• 2010

In this study, the laser sintering of inkjet-printed silver lines was evaluated. Silver-nanoparticle ink and a drop-ondemand (DOD) inkjet printer were used for printing on glass and polyethylene terephthalate (PET) substrates with various thicknesses. To sinter the printed silver nanoparticles, the silver layer printed on the transparent substrates was irradiated by focused CW laser beams that were incident normal to the substrates; the irradiation was carried out for various beam intensities and for various irradiation times. The electrical conductivity of the laser-sintered silver patterns was measured and compared with the conductivity of silver patterns sintered by using an oven. The increase in the temperature caused by laser irradiation was also calculated on the basis of the laser beam intensity, irradiation time, surface reflectivity, and thermophysical property of the substrate in order to estimate the increase in the electrical conductivity caused by laser sintering.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1237-1238
• /
• 2004