• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.299-300
• /
• 2019

본 논문에서는 MVDC(Medium-Voltage DC) 차단기의 성능평가를 수행하기 위해 사용되는 단락 시험 설비의 새로운 구조를 제시한다. 단락 시험 설비는 직류 고전압과 고전류를 발생시키고 이러한 조건에서 차단기의 개폐 성능을 검증한다. 고전압과 고전류를 단일 회로로 합성하는 구조의 경우, 단락 시험 설비의 규모와 전력용량이 매우 크다. 제시하는 단락 시험 설비는 별개의 회로인 고전류원과 고전압원으로 구성된다. 각 회로에서 직류 고전압과 고전류를 발생시켜 단락 시험을 수행하는 구조이다. 제시하는 단락 시험 설비의 구조와 동작 원리를 설명하고 시뮬레이션 분석을 통하여 그 성능을 검증하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.214-215
• /
• 2020

The 3D scanning technology is being introduced for quality inspection of building construction. Therefore, this study tried to confirm whether it is possible to check the quality of rebar by using 3D scanning. After rebar placed on the formwork slab was scanned with a 3D scanner, the rebar spacing was confirmed by overlapping with the CAD drawing. As a result, the 3D scanner was able to check the quality of rebar work on one floor at a time. Therefore, 3D scanning could be used for quality inspection of rebar works such as columns, beam and girders, walls, and slabs in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.73-74
• /
• 2023

The purpose of this study is to derive the cause of the quantity difference and present the considerations when take-off rebar quantity based on BIM model by comparing the quantity of rebar based on BIM model with 2D drawing. This research was limited to take-off the quantity of rebars in the building frame work, and after take-off the quantity of rebars by 3D modeling the 2D drawing of the target building with Revit, the quantity difference was compared with 2D-based software. Therefore, when take-off the quantity of rebars based on the BIM model, instead of take-off the existing 2D-based quantity premium proportion, according to general structural consider development length, lap splice length, covering thickness, reinforcing bars and spacing. In the future, this study is expected to contribute to improving the accuracy of BIM-based frame construction quantity take-off.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.3
• /
• pp.17-23
• /
• 2009

Conventional methods of reinforced slope analysis based on the concept of limit equilibrium have been widely adopted mainly due to their simplicity and short computation time. But depending upon the assumptions on the inter-slice forces, the factor of safety resulting from the limit equilibrium method is not uniquely determined. This paper describes a method to calculate the factor of safely of a slope using a numerical analysis. Recently some useful analysis techniques (Strength reduction method and the stability method using stress fields) by numerical analysis are proposed and their theory and characteristics applications are studied and investigated with simple examples in this paper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.610-625
• /
• 2020

This study suggests an alternative breast-prosthesis-making process for female breast cancer patients. From June 2018 to July 2018, we conducted a study using nine females between the ages 40-50 who never had breast cancer. We recorded the reported subjective sensations and objective physiological responses to different types of artificial breast materials: Trulife silicon breast prostheses (TS) and hand-made silk breast prostheses (HS). Considering the materials used in TS and HS individually, we studied the subjective sensation with regards to how each material functioned in a photo (VP), movement (VM) and the visual tactility (VT) sense. The results showed that comparing VP and VT led to more significant differences than those comparing VM and VT. In addition, there was a significant difference in terms of tactile sensation when comparing TS and HS with respect to subjective responses to texture. Subjects reported that HS felt more comfortable and gave a better cooling sensation. However, the measured objective physiological responses indicated that skin temperature was higher with HS than TS when touched. This research contributes to scholarship around alternative and new materials to build breast prostheses for women with breast cancer.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.14-21
• /
• 2000

This paper presents the results of performance evaluation of silicone treatment technique which was developed for the insulation rehabilitation of water tree aged XLPE power cables. We treated the water tree aged 325 [$\textrm{mm}^2$] CN/CV cables with silicone, and then analyzed the degree of insulation rehabilitation as a function of time. AC breakdown test was conducted to evaluate insulation rehabilitation. The diagnosis test using relaxation current measurement and the characteristic analysis of insulation were also performed to estimate silicone treated cable. AC breakdown strength of silicone treated cable for one year was increased, resulting from the chemical reaction between silicone fluid and water. This experiment showed that the silicone treatment technique was effective for insulation rehabilitation of the water tree aged cables.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.141-148
• /
• 2005

The settlement measured in the field shows a considerable difference from the predicted settlement due to various factors such as nonhomogeneous soft layers, sampling disturbance, erroneous selection of soil parameters and deficiency of consolidation theories among others. Therefore, analysis of actual settlement behavior based on the instrumentation and measurement data during consolidation period is a very useful procedure in evaluating the rates of consolidation settlement. This paper introduces a new practical method of analyzing consolidation settlement behavior, which is generalized and formulated from the existing analysis methods such as Hyperbolic method, Hoshino method and $\sqr{s}$ method. Through case studies, it is shown that the proposed method is a superior technique in reflecting the measured settlement behavior.

• Annals of Clinical Neurophysiology
• /
• v.2 no.2
• /
• pp.107-113
• /
• 2000

Background & Objectives : Motor evoked potentials(MEPs) to magnetic trans cranial stimulation were performed to evaluate upper motor neuron involvement and relationship to lower motor neuron involvement in motor neuron disease patients. Method : MEPs were obtained in the 17 consecutive patients with motor neuron disease. These patients were divided into three group based on clinical evidence of upper and lower motor neuron involvement, bulbar symptom; amyotrophic lateral sclerosis(ALS), progressive muscular atrophy(PMA), progressive bulbar palsy(PBP). MEPs were recorded from abductor pollicis brevis and abductor hallucis muscles. Abnormal MEPs were defined by delayed central motor conduction time or absent MEP. Results : MEPs were abnormal in 64%(11/17) of patients; 100%(7/7) in ALS, 64%(4/7) in PMA, 0%(0/3) in PBP respectively. In 68 total recording muscles, 34 muscles had evidence of motor weakness and showed abnormal responses in 59%(20/34). Whereas 34 muscles with normal strength, only 3%(1/34) of muscles showed abnormal response. Conclusion : MEPs are well correlated with upper motor neuron signs in ALS and may detect masking upper motor neuron signs in PMA. The muscles with lower motor neuron sign(weakness) usually relate with abnormal MEPs reponses.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.69-74
• /
• 2008

In this paper, a comfort evaluation system based on a product-focused process design (PFPD) has been proposed for high comforts interior seat covers. Correlations between comforts properties and physical/thermal properties of interior seat covers were examined by combining traditional regression analysis and data mining techniques. A skin sensorial comfort of leather samples was evaluated by only human tactile sensation. The adjectives of leather car seat covers are 'Soft', 'Sticky' and 'Elastic'. Thermo-physiological comfort properties of leather samples were evaluated by only human tactile sensation. The adjectives of leather car seat covers are 'Coolness to the touch' and 'Thermal and humid'. Skin sensorial comforts of cloth samples were evaluated by only human tactile sensation. The adjectives of cloth car seat covers are 'Soft', 'Smooth', 'Voluminous' and 'Elastic'. Thermo-physiological comforts of cloth samples were evaluated by only human tactile sensation. The adjectives of cloth car seat covers are 'Coolness to the touch' and 'Thermal and humid'.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.82-86
• /
• 2008

Cooling function is definitely one of the most desirable attribute of clothing. In spite of the recent progress on phase changing material(PCM) research, the final products with sufficient amount of cooling capability have not yet to be developed in market. A new concept of cooling fabrics has been proposed by applying "Peltier effect" to textile materials. It occurs whenever electrical current flows through two dissimilar conductors; depending on the direction of current flow, the junction of the two conductors is absorbed or released heat. This effect has been tested on P-type and N-type conducting polymers. A P-type conductive polypyrrole coated fabric was synthesized by in-situ polymerization on plain weave PET to make conductive fabrics. And an N-type electrically conductive material was synthesized by treatment of MWNT and polyethyleneimine(PEI). A noticeable amount of temperature difference has been found on the fabrics.