• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.493-498
• /
• 2011

Reactive mesogens were used to prepare photo-cured liquid crystal films in which orientations of liquid crystal molecules were preserved by crosslinked networks of cured reactive mesogens. The molecular orientations of liquid crystal mixtures of photo-reative mesogens and non-reactive nematic liquid crystals were studied and compared before and after curing reactions. The effects of temperature and the amount of the non-reactive nematic liquid crystal in the mixture on birefringence of the liquid crystal films were investigated. It was found that optical compensation films with different birefringence could be prepared by controlling the amount of the nematic liquid crystals in the reactive mesogen mixtures.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.33-38
• /
• 2008

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.531-537
• /
• 2004

Various half-ester acrylates were prepared from anhydrides and 2-hydroxyethyl acrylate. Photocurable epoxy modified acrylates were prepared from synthesized half-ester acrylate and neopentylglycol diglycidylether. Physical properties such as hardness, yellowing, tensile strength and elongation were tested and compared as the structure of oligomer in cured-film differs. It was found that viscosity of neopentylglycol diglycidylether-hexahydrophthalic anhydride (NP-HA) was highest. Hardness and tensile strength of photocrosslinked neopentylglycol diglycidylether-hexahydrophthalic anhydride were better than those of other photocrosslinted epoxy acrylates. And 5% weight loss temperature of photocrosslinked neopentylglycol diglycidylether-hexahydrophthalic anhydride was higher than those of other photocrosslinked epoxy acrylates. Value of yellow index of photocrosslinked neopentylglycol diglycidyl ether-succinic anhydride (NP-SA) was lower than the other products.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.237-241
• /
• 2005

Photocurable pentaerythritol modified hyperbranched acrylates were prepared from trimellitic anhydride, glycidyl methacrylate and pentaerythritol derivatives. Thermal stability obtained by using TGA showed that HBMA-1 was superior to the others. Hardness, abrasion resistance and tensile strength of HBMA-1 showed that Hey were also superior to the others. Value of yellow index of HBMA-1 showed the lowest.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2005

Photocurable hyperbranched acrylates were prepared from acrylic acid and hyperbranched polyol (HBP-16, 32, 64). Physical properties of three kinds of photocurable hyperbranched acrylated were investigated. Thermal stability of UV cured film measured by TGA shifted to higher temperature with increasing of functionality. Hardness, abrasion resistance, and tensile strength of UV cured film also increased with increasing functionality of acrylate. Weathering test for UV cured film showed the value of yellow index increased with increasing functionality of acrylate.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.466-469
• /
• 2003

This paper presents the routing and wavelength and timeslot assignment problems for a circuit-switched time division multiplexed (TDM) wavelength-routed networks. In this paper, we propose an efficient distributed control protocol for establishing lightpath dynamically. The protocol uses backward reservation to reduce the chance of blocking. we use aggressive reservation method with usable multiple channels and select only one in multiple channel. We show through simulation that the proposed protocol improves the success rate in TDM -based lightpath establishment.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.27-32
• /
• 2008

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.469-473
• /
• 2010

The curing mechanism and characteristics of UV curable acrylate resins were studied using Photo-DSC, FTIR, and Raman spectroscopy. Effects of chemical structures of acrylate, numbers of functional group, and UV intensity on curing kinetics were investigated with Photo-DSC. FTIR and Raman spectroscopy has been used to understand curing mechanisms and reaction conversion. In order to investigate the effect of oxygen on the photo-curing reaction, the curing process was compared between the acrylate and thiol-ene resins. The reaction conversion was found to be less than 80% for acrylate resins. The photo-curing reaction of the acrylate resin could not proceed to the end because of oxygen which acts as a reaction inhibitor while the thiol-ene resin was hardly affected from oxygen during the curing process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.951-958
• /
• 2000

In wavelength-routed all-optical networks, signals are transmitted on a direct optical path, or a lightpath, in a single-hop manner without opto-electronic/electro-optic(OE/EO) conversion at intermediate nodes. However, due to the physical constraints of optical elements such as ASE noise and crosstalk signals can be degraded un a long path. To establish a connection under such impairments, the optical signal may need to be regenerated at intermediate nodes, dividing a lightpath into two or more fragments. However, since signal regeneration at intermediate nodes requires additional network resources, the selection of these nodes should be made carefully to minimize blocking of other lightpaths. In this paper, we deal with the problem of establishing a lightpath in a multihop manner under physical constraints. We provide both minimal-cost and heuristic algorithms for locating signal regeneration nodes(SRNs). For a minimal-cost algorithm, we formulate the problem using dynamic programming(DP) such that blocking of other lightpaths due to the lack of transmitters/receivers(TXs/RXs) and wavelengths is minimized throughout the network.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.536-541
• /
• 2012

The effects of silica content were studied on UV curing characteristics and defect formations in imprinted patterns of hundreads nanometer size for the photo-curable imprinting composites with silica particles. An increase in elasticity and a decrease in shrinkage were observed with an increase in silica content in the imprinting resin which was UV cured at room temperature. However, the patterned nano-pillars were stuck together with neighboring nano-pillars if the amount of silica is more than 7 wt%. This can be ascribed to the increased viscosity of imperfectly cured resin due to the obstruction of the photo-reaction by silica particles. Addition of silica to the imprinting resin is useful in enhancing the strength of the cured resin although it is difficult to get good imprinted patterns for the resin with more than 7 wt% of silica due to the reduction of photo-reaction conversion.