• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.337-349
• /
• 2006

Seven hundred and fifty one fractures of the rhyolitic tuffaceous rock masses were mapped using 6 scanlines placed on rock slope exposures that were within 8.02 km of Busan-Ulsan highway. These data were analyzed to find the number of fracture sets that exist in the rock slopes and the probability distributions of orientation, spacing, trace length and fracture size in 3-D for each of the fracture sets. All the fracture set orientation distributions exhibit high variability. The Fisher distributions were found to be unsuitable to represent the statistical distribution of orientation for most of the fracture sets. The probability distributions, gamma, exponential and lognormal were found to be highly suitable to represent the distribution of spacing and semi-trace length of fracture sets. In obtain-ing these distributions, corrections were applied for sampling biases associated with spacing and trace length. The generated fracture system in 3-D was used to make predictions of fracture traces for each fracture set on 2-D win-dows. Developed stochastic 3-D fracture network for the rock mass was validated by comparing statistical proper-ties of the observed fracture traces on scanlines with the predicted fracture traces on the scanlines. This exercise fumed out to be successful.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.44-49
• /
• 1997

액체금속로용 2차원적 연소 해석 코드 REBUS-2[1]에 횡방향 적분법 및 다항식 전개법에 기초한 3차원적 육방형 노달 방법을 결합하여, 3차원적 연소 해석 코드 REBUS-K를 개발하였다. REBUS-K는 3차원적 중성자속 분포 계산 및 미시적 연소 계산을 통해 노내 연소 해석을 수행하며, 또한 핵연료 방출/재배치 및 재장전, 재처리, 성형가공 등의 노외 주기 계산을 수행한다. 비평형주기 및 평형주기 해석을 수행하며, 평형주기 해석 시에는 지정된 제한 연소도 및 증배계수를 만족시키는 주기 길이와 장전 농축도를 탐색한다. 개발된 코드의 검증 계산을 450 MWt 액체금속로의 비평형주기 및 평형주기 문제에 대하여 수행하였으며, 계산 결과를 Argonne 연구소의 3차원적 연소 해석 코드 REBUS-3[2]의 결과와 비교하였다. 그 결과 원자로 증배계수, 출력 분포, 증식율, 연소도, 장전 핵연료의 농축도, 주기 길이 등의 연소 특성이 수렴 조건 이내에서 일치하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.348-350
• /
• 2018

In this paper, dispersion-managed optimal link configuration with the repetitively artificial-distributed single mode fiber lengths and residual dispersion per span, in which optical phase conjugator placed at midway, is proposed. It is confirmed that the proposed optical link configuration is suitable for expanding transmission length capable to obtain the good performance.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.30-35
• /
• 1983

To investigate the factors affecting the transportability of spray droplets, the maximum distance, the effective distance, the ratio of even distribution, and the diameters of particles were measured in accordance with the different pressure levels of power sprayer using 3 hole swath type nozzle, and the results are summerized as follows; 1. The distance of the most dense point from the nozzle was shortened by 0.5 meter with the 100-meter-long hose. The maximum reaching distances were reduced by 1.5 and 1.0 meters for the 13m/m and the 8.5 m/m hoses respectively, and the effective distance were reduced by 0.5 meter for both cases. 2. The effective distance can not be extended beyond 14 meters even if the length of hose is minimized at the rated pump pressure 28 kg/$cm^2$, it was 1 meter longer for 13m/m hose compared to the 8.5m/m one. 3. In case of 13m/m hose, the most dense point can be extended further by 0.5 meter increasing the pump pressure by 8 kg/$cm^2$, and the maximum distance and effective distance were increased by 2.0 and 0.5 meters respectively. There was no significant effect of pressure changes on the transportability in case of 8.5m/m hose. 4. Both the reduction of hose length and the increase of pump pressure influenced in large extent to the atomization effect of droplets. It was noticed that the diameter of droplet is related to the pump pressure and inside diameter of hose. 5. The pressure drop in 100-meter-long and l3m/m hose was 5~7kg/$cm^2$ at the pump pressure range of 25~33kg/$cm^2$, and it is an equivalent of 2% per 10 meter length of hose.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.4-6
• /
• 2002

본 연구는 포워딩 테이블의 자료구조와 검색 알고리즘을 개선하여 고속 IP주소 검색을 구현하는 소프트웨어 기반의 연구로써 목적지 IP주소에서 검색할 길이를 결정한 후 길이별로 준비된 해시 테이블 검색을 통해 O(1)의 속도로 IP주소 검색을 실시할 수 있다. IP주소 검색은 목적지 IP주소와 다수의 포워딩 테이블 엔트리 중에서 가장 많은 비트가 일치하는 엔트리를 검색하는 과정으로 일반적인 완전일치 검색이 적용되기 어렵다. 본 연구에서는 포워딩 테이블 엔트리로 구성된 트라이를 기반으로 길이별 다중 해시 테이블을 구성하여 평균 O(log$_2$N),N=4 의 속도로 IP주소 검색을 한다. 이때 최악의 검색시간은 4회의 주 메모리 접근시간이며 더 빠른 검색을 위해 본 논문은 각 프리픽스의 첫 8비트를 키로 256개 그룹을 만들고 각 그룹별 최대 프리픽스 길이를 기록한 테이블을 캐쉬에 저장함으로써 길이별 해시 테이블 검색 시 N값을 99.9%의 확률로 3이하로 제한할 수 있다. 이것은 포워딩 테이블의 프리픽스 길이 분포에 의한 결과이며, 99.9%의 확률에서 최악의 검색시간을 3회의 주메모리 접근시간으로 할 수 있다. 주 메모리 접근시간 50㎱를 적용하면 150㎱의 검색속도는512B 패킷을 가정할 때 약 27Gb㎰의 검색속도를 지원할 수 있다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.117-122
• /
• 1988

다른 生長條件(growth chamber, outdoor)과 室素施肥條件(N 0, N 60kg $ha^{-1}$')에서 자란 Perennial rye- grass잎에 있어서 葉伸長率(LER)과 伸底部位의 空間的 移動 및 細胞의 伸長등을 알아보고자, 잎 基部내 伸長部位의 O~30mm에 pin처리를 하고 일정시간후 Pin hole의 이동거리로서 長을 조사하었으며 표면복 제방법에 의해 細胞의 길이를 측정하였다. Growth chamber에서 자란 목초의 LER은 25.2mm $day^{-1}$(outdoor 목초에 비해 54.6% 증가), 생육의 공 간분포는 基部로부터 24mm까지, 최대생육은 10~13nm에서, 세포신장은 20nm까지로 관찰되었다. Outdoor 목초는 LER 16.3nm, 생육분포는 17mm까지, 최대생육은 5 ~8mm에서, 세포신장은 14mm까지었다. 질소시비구 목초의 LER은 30.3nm$day^{-1}$(무시비구 목초에 비해 61, 2% 증가), 생육분포는 基部로부터 27 mm까지, 최대생육은 13~1Smm에서, 세포신장은 21mm까지었으며, 질소무시비구 목초는 LER 21.3mm, 생육 분딘는 21mm까지 최대생육은 8~llmm에서, 세포신장은 16mm까지였다. Ligule 부위의 세포길이는 현저히 짧아졌으며, LER이 빠를때 伸長部位내 生育의 移動速度도 빨랐다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.979-984
• /
• 2015

In the present paper, we evaluate the effects of the safe-end length and thickness of the similar metal weld (SMW) of safety injection nozzles on stress distributions at the dissimilar metal weld (DMW). For this evaluation, we carry out detailed 2-D axisymmetric finite element analyses by considering four different values of the safe-end length and four different values of the thickness of SMW. Based on the results obtained, we found that the SMW thickness affects the axial stresses at the center of the DMW for the shorter safe-end length; on the other hand, it does not affect the hoop stresses. In terms of the safe-end length, the values of the axial and hoop stresses at the inner surface of the DMW center increase as the safe-end length increases. In particular, for the cases considered in the present study, the stress distributions at the DMW center can be categorized according to certain values of safe-end length.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1143-1148
• /
• 2014

This paper has analyzed the change of subthreshold swing for doping distribution function of asymmetric double gate(DG) MOSFET. The basic factors to determine the characteristics of DGMOSFET are dimensions of channel, i.e. channel length and channel thickness, and doping distribution function. The doping distributions are determined by ion implantation used for channel doping, and follow Gaussian distribution function. Gaussian function has been used as carrier distribution in solving the Poisson's equation. Since the Gaussian function is exactly not symmetric for top and bottome gates, the subthreshold swings are greatly changed for channel length and thickness, and the voltages of top and bottom gates for asymmetric double gate MOSFET. The deviation of subthreshold swings has been investigated for parameters of Gaussian distribution function such as projected range and standard projected deviation in this paper. As a result, we know the subthreshold swing is greatly changed for doping profiles and bias voltage.

• Journal of Welding and Joining
• /
• v.17 no.1
• /
• pp.104-115
• /
• 1999

There have been many studies on the two dimensional thermo-elasto-plastic analysis in welding process, mostly from viewpoint of residual stresses. In this study, the temperature distribution, transient thermal stress, and angular distortion during bead-on-plate gas metal arc welding of rectangular plates were analyzed by using the finite element method. A nonlinear heat transfer analysis was first performed by taking account of the temperature-dependent material properties and convection heat losses on the surface. This was followed by a thermo-elasto-plastic stresses and distortion analysis that incorporates the constrained boundary condition of the two dimensional solution domain to get the three dimensional size effect of the plate. The constrained boundary conditions adopted in this study were the constant displacement condition over the whole two dimensional section for axial movement in the welding direction, and the force boundary condition for rotational movementof the domain around the axis of the welding direction. It could be revealed that the theoretical predictions of the angular distortion have an improved agreement with the experimentally obtained data presented in the previous study.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.107-110
• /
• 1999

본 연구에서는 진공압추출법에 의해 제조되는 알루미나(AI$_2$O$_3$) 단섬유예비성형체의 제조공정시 발생하는 섬유들의 배향분포의 특징을 2차원 수치모사를 통해 밝혔다. 수치해석은 섬유의 배향분포를 2차원으로 가정한 후 제조공정시 섬유들이 적층되는 현상을 섬유의 낙하, 회전, 미끄러짐, 이동의 단계의 나누어 모델링하였다. 해석결과 섬유의 배향과 부피분율은 섬유의 종횡비(길이/지름)에 의해 크게 영향을 받으며, 배향 분포는 정규분포와 유사한 것으로 밝혀졌다.