• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.765-768
• /
• 2014

본 연구에서는 비대칭 이중게이트 MOSFET의 상하단 게이트 산화막 두께 비에 대한 문턱전압 및 전도중심의 변화에 대하여 분석하고자한다. 비대칭 이중게이트 MOSFET는 상하단 게이트 산화막의 두께를 다르게 제작할 수 있어 문턱전압이하 영역에서 전류를 제어할 수 있는 요소가 증가하는 장점이 있다. 상하단 게이트 산화막 두께 비에 대한 문턱전압 및 전도중심을 분석하기 위하여 포아송방정식을 이용하여 해석학적 전위분포를 구하였다. 이때 전하분포는 가우스분포함수를 이용하였다. 하단게이트 전압, 채널길이, 채널두께, 이온주입범위 및 분포편차를 파라미터로 하여 문턱전압 및 전도중심의 변화를 관찰한 결과, 문턱전압은 상하단 게이트 산화막 두께 비에 따라 큰 변화를 나타냈다. 특히 채널길이 및 채널두께의 절대값보다 비에 따라 문턱전압이 변하였으며 전도중심이 상단 게이트로 이동할 때 문턱전압은 증가하였다. 또한 분포편차보단 이온주입범위에 따라 문턱전압 및 전도중심이 크게 변화하였다.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.3
• /
• pp.13-22
• /
• 2010

본 연구는 칠면초의 분포역을 결정짓는 개체수의 변화와 성장 변화를 분석하고자 6개 조사역 18 Site에서 2006~2008년의 3년간 개체수 변화, 지상부길이 생장변화, 토양요인의 변화를 조사하였다. 칠면초의 개체수 변화는 간척으로 인한 해수유입의 급격한 감소가 저위 염습지의 수분공급이 원활하지 못한 환경을 조성하여 2008년도 8월 이후에 급격히 감소하는 영향을 나타냈다. 길이 생장변화 역시 강수, 해수유입 감소 등에 의한 탈염이 큰 영향을 미친 것으로 조사되었다. 특히 토양요인의 변화에서 칠면초의 개체수 및 길이생장에 $EC_{1:5}dS/m$가 가장 큰 영향을 미친 것으로 나타났다. 새만금 만경강 하구역 갯벌 염습지는 새만금 간척사업으로 인한 해수유입의 급격한 감소와 담수의 유량변화에 따른 수위변동 등의 환경요인에 의하여 간척사업이전 우점종인 칠면초의 분포역과 생장에 큰 영향을 미쳤다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.4
• /
• pp.129-137
• /
• 2003

The cable in the cable-supported structures is long, therefore it can be reasonable to apply the different models, compared with those used for general steel elements. This paper compares the statistical models with existing cable fatigue data, after deriving the cdf(cumulative distibution function) with modifying the log-normal distribution, the existing extremal distributions so as to include length effect. The paper presents the appropriate model for analyzing and assessing the fatigue behavior of cable which is being used for actual structures.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.121-129
• /
• 2004

The purpose of this study was to photoelastically visualize 4he distribution of fortes transmitted to the alveolus and surrounding structures using three different types of headgear for the distal movement of the upper molars. A photoelastic maxillary model was made and three different directional forces applied, which were high-pull, straight-pull, and cervical-pull. Stress distribution was recorded through circular polariscope, and two-dimensional photoelastic stress analysis was performed according to isochromatic fringe characteristics. The results were as follows: 1. In the case of high-pull headgear bodily movement occurred in the medium- length outer bow, stress distribution in the apical region was 1st molar, 2nd premolar, lst premolar in sequence and there was no apparent difference. 2. In the case of straight-pull headgear, bodily movement occurred in the long outer bow and stress distribution in the apical region was heavy in the 1st molar, 2nd premolar, 1st premolar in sequence. But. there were no apparent differences according to the length of the outer bow. 3. In the case of cervical- pull headgear, bodily movement also occulted in 4he long outer bow, and apical stress of the premolar region was heaviest among other cases and apical stress of the 2nd premolar was heaviest in the short outer bow. In clinical situations, to achieve bodily movement of the upper 1st molars without modifying outer bow height, applying an outer bow length as long as the inner bow length in high-pull headgear and applying an outer bow length longer than the inner bow length in straight-pull, cervical-pull headgear are recommended.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.697-700
• /
• 2006

저수시 하천유량(Low Streamflow)의 추정은 하천의 수질관리, 용수공급계획, 댐 방류계획등의 수자원관리에 있어서 매우 중요한 부분이다. 이러한 중요성에 따라 Vogel과 Kroll (1989)은 저수시 하천유량을 추정하기 위한 여러 가지 확률분포함수를 제안하였다. 가장 흔히 제안되어지는 이변수 확률분포(Two-Parameter Distribution)로는 Lognormal 분포와 Weibull 분포가 있으며 이와 더불어 Three-Parameter Lognormal, Three-Parameter Weibull, Log Person Type Ⅲ 분포도 널리 사용되어진다. 그러나 이러한 여러 가지 확률 분포함수 중에서 가장 적절한 확률분포의 선택은 저수시 하천유량의 물리적인 측면과는 상관없이 주로 적합도(Gooness of Fit)에 기인된 통계치에 의해서만 결정되기도 하는데 이러한 경우 잘못된 가정을 받아들이는 확률이 높아짐에 따라 추정결과의 신뢰성(Reliability)을 감소시킬 수 있다. 이러한 문제점을 극복하기 위해서 Onoz와 Bayazit (2001)는 Recession Curve를 지수함수로 가정하고 최대 갈수 기간의 길이(Maximum Dry Period Length)의 확률에 대한 이론적인 결과치들을 사용하여 Weibull 분포의 특정한 경우에 해당되어지는 Power 분포를 유도하였으며 유도된 Power 분포의 매개변수를 추정하기 위하여 L-Moment 방법을 사용하였다. 또한 Onoz와 Bayazit (2001) 작은 유출량에서 확률분포와 잘 맞지 않는 경우 작은 유출량값에 작은 가중치를 부여하여 확률분포에 대한 영향을 줄이는 방법인 LL-Moment 방법을 제안하였다. 본 연구에서는 낙동강 유역의 1번부터 5번 소유역에 대해 SSARR 모형을 이용하여 모의한 유출량을 이용하여 Weibull 분포, L-Moment방법에 의해 추정된 매개변수를 사용한 Power 분포, LL-Moment 방법에 의해 추정된 매개변수를 사용한 Power 분포를 적용하였으며 이들 분포의 적합도를 PPCC Test를 사용하여 평가해봄으로써 낙동강 유역에서의 저수시의 유출량 추정에 대한 Power 분포의 적용성을 판단해 보았다.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.1
• /
• pp.14-20
• /
• 1995

We calculated the wind velocities for 32 Cyg in order to understand how influence a damping length on the wind of supergiant driven by Alfven waves. Four cases, $\lambda$=0.9, 1.0, 5.0, the ratio of the damping length to the supergiant's radius, and the damping length increasing linearly with the distance from the star, were compared. The results showed the forces by Alfven waves gave the major contribution to the wind velocity but the forces by the pressure and gravitation did little. The model for the damping length with the linear relation showed the rapid increased due to short damping length near the surface of the star.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.71-80
• /
• 2014

Employing PTAS to building minimum spanning tree for a large number of equal distribution input terminal nodes can be a effective way in execution time. But applying PTAS to building minimum spanning tree for tremendous unequal distribution node may lead to performance degradation. In this paper, a partial PTAS reflecting the scheme into specific node dense area is presented. In the environment where 90% of 50,000 input terminal nodes stand close together in specific area, approximate minimum spanning tree by our proposed scheme can show about 88.49% execution time less and 0.86%tree length less than by existing PTAS, and about 87.57%execution time less and 1.18% tree length more than by Prim's naive scheme. Therefore our scheme can go well to many useful applications where a multitude of nodes gathered around specific area should be connected efficiently as soon as possible.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.365-375
• /
• 2004

This paper presents the numerical results in strength and stress distribution behavior for the connections of corrugated steel plates (CSP). The results obtained using the finite element method indicate that the CSP with =30mm of longitudinal edge lap, by the current standard specification, has very conservative values. The results also indicate the difference of strength behavior from the bolt arrangement. The strength behavior of standard corrugated type with staggered holes is only affected by circumferential edge lap, but the edge lap and bolthole spacing have an effect on the strength behavior for the deeply corrugated type with parallel holes. Based on these results, this paper examines the current specification of the connections for CSP.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.339-345
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as follow : On top of this, the experimental conditions had whether to install shading and put a shading length differently, before measuring and analyzing the heating temperature of the exterior wall. Subsequent results were drawn as shown below. Based on the maximum temperature, the temperature was lowered as much as around 90℃ at 150mm, around 150℃ or over at 300mm and over 175℃ at 450mm. It also turned out that the difference in maximum temperature dropped by around 180℃ or over. This indicated that the shading installation works well in lowering flame temperature generated by fire spread of the exterior wall.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.401-406
• /
• 2015

The change of subthreshold swing for channel length of asymmetric double gate(DG) MOSFET has been analyzed. The subthreshold swing is the important factor to determine digital chracteristics of transistor and is degraded with reduction of channel. The subthreshold swing for channel length of the DGMOSFET developed to solve this problem is investigated for channel thickness, oxide thickness, top and bottom gate voltage and doping concentration. Especially the subthreshold swing for asymmetric DGMOSFET to be able to be fabricated with different top and bottom gate structure is investigated in detail for bottom gate voltage and bottom oxide thickness. To obtain the analytical subthreshold swing, the analytical potential distribution is derived from Possion's equation, and Gaussian distribution function is used as doping profile. As a result, subthreshold swing is sensitively changed according to top and bottom gate voltage, channel doping concentration and channel dimension.