• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.440-446
• /
• 1996

The multiple-ridged circular waveguides is analyzed using Fourier series and the mode matching technique. The enforcement of the boundary conditions yields the simultaneous equations for the field coefficient inside the waveguides. The simultaneous equations are solved to represent a dispersion relation in an analytic series form. The numerical computation is performed to illustrate the behavior of the cutoff wavenumbers in terms of number, length and angle of ridges. The presented series solution is exact and rapidly-convergent so that it is efficient for numerical computation. A simple dispersion relation based on the dominant mode analysis is obtained and is shown to be very accurate for most practical applications.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.248-253
• /
• 2002

가. 대형 원형베일의 볏짚을 절단하여 축사의 사조나 TMR제조기에 공급하는 원형베일쵸퍼를 개발하였다. 나. 시작기의 적정작업속도는 PTO 500rpm 수준이었으며 이때 작업능율은 964kg/시간, 평균볏짚절단길이는 13.9 cm이었다. 다. 시작기의 소요동력은 PTO회전수가 300rpm에서 600rpm으로 높아짐에 따라 증가하였으며 PTO회전수 500rpm 일 때 축 토크는 38.4kgf·m 수준이었다. 라. 비육우 50두 규모에서 시작기는 관행(볏짚절단기)에 비하여 노력절감 92%, 작업비용 26.%절감으로 나타나 실용성이 있는 것으로 나타났다. 마. 볏짚의 허실율만을 고려한 손익분기급이량은 106톤/년으로 나타나 대규모의 전업 낙농 농가나 비육우 농가 또는 여러농가에서 공동 사용할 경우에 경제성이 있는 것으로 나타났다.

• The Korean Journal of Mycology
• /
• v.14 no.4
• /
• pp.273-280
• /
• 1986

The degree of autolysis and lytic enzyme production in the culture filtrate of Rhizopus oryzae was investigated. The formation of protoplast by using autolytic enzymes from Rh. oryzae was also attempted. Protoplasts were liberated from Rh. oryzae mycelium by lytic enzymes present in autolytic-phase culture filtrate. Maximum release of chitosanase and proteolytic enzyme into culture filtrate during autolysis was corresponded to maximum protoplast-liberating activity. High yields of protoplasts were obtained from 10 hr-age of Rh. oryzae mycelium with 0.5 M mannitol as osmotic stabilizer. The optimum temperature and pH for mycelium digestion were $25{\sim}30^{\circ}C$ and $6.0{\sim}6.5$ respectively. The mycelium of the 18 hours cultures were treated with autolytic enzyme in same volume of osmotic stabilizer at $30^{\circ}C$ for 5 hours and then it was confirmed by scanning electoron microscope that protoplast were produced beside the digesting cell wall of the fungi.

• Journal of Fashion Business
• /
• v.21 no.1
• /
• pp.74-87
• /
• 2017

The aim of this study was to analyze the features of bodice patterns modeled using a dress form that represents Korean female fashion models' body features. A controlled experiment was carried out using an existing dress form that has been frequently used in South Korea. The purpose of the study was to suggest notable findings derived from understanding the development of bodice patterns for Korean female fashion models. The comparison of features of bodice patterns from the developed and existing dress forms was carried out with consideration of the upper body features of the developed dress form, such as body angles and body cross-sectional shapes. The following results were derived from the investigations. (1) The angles of the upper and lower breast cups of the developed dress form differed to those of the existing dress form, showing a 5.0cm smaller front shoulder dart and a 3.5 larger ㎝ ㎝ front waist dart within the bodice patterns. (2) The body angle features of the developed dress form included a straighter neck and shoulder blade and more concave center back than the existing dress form, with a 2.0 reduced back neck height and a 4.8 larger back waist dart for ㎝ ㎝ the bodice back panel. The more realistic body angles of the developed dress form anticipate the improvement of garment pattern-making. (3) The altered shoulder angles resulted in an increased size of the back shoulder dart and a decreased size of the front shoulder height within the bodice patterns. (4) The increased rate of curvature of cross-sectional shapes on the bust and waist circumferences of the developed dress form resulted in an increase in the sizes of the front and back waist darts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3137-3143
• /
• 2009

In this paper, a single arm spiral antenna has been investigated about the characteristics of polarization and tilt beam. If a circumference length of spiral is bigger than a wavelength, it have a characteristic of varying maximum radiation beam direction. In addition, circular polarizations (RHCP, LHCP) can be variable by the feeding points (inner, outer). Also maximum beam directions tilt in different direction according to the circular polarizations, LHCP and RHCP. These characteristics of single arm spiral antenna are able to apply in the beam forming, diversity, MIMO application which has dual polarization using an antenna element.

• Proceedings of the Korea Society of Costume Conference
• /
• 2003.05a
• /
• pp.34-34
• /
• 2003

본 연구는 체형의 특성이 현저히 나타나는 40~50대의 Plus-size 여성을 대상으로 체형의 특징이 고려된 치수체계에 대해 맞음새가 우수한 재킷을 개발하고, 이 원형을 토대로 하여 체형의 단점을 보완할 시각적 효과를 연구하기 위해 Plus-size에 해당하는 여성을 선정하여 수트(suit)를 제작한 후 착의 평가하여 Plus-size에 적합한 수트를 제안하는데 목적을 두고 있다. 결과를 요약하면 다음과 같다. 1. Plus-size 여성의 착용실태를 파악하기 위해 실시한 착용실태 조사는 판매자의 측면의 심층면접과 소비자 측면의 착장조사로 구분하여 조사하고 분석하였다. 착용실태조사 결과, Plus-size 여성은 의복구매시 맞음새와 편안함을 중시하고 상완부와 어깨의 두께, 가슴둘레와 복부의 비만등의 체형단점을 갖게 되므로 판매자측에서는 의복제도 시에 등품, 앞품, 상완부, 복부의 여유분을 고려하고 있었다. 시각적 효과로는 세미피트 스타일의 프린세스 라인과 허리선+20, 30cm의 재킷길이, 그리고 테일러드 칼라, 스테인 칼라, 라운드 네크라인이 판매자과 소비자의 양측면에서 선호되고 있었다. 2. Plus-size 여성의 체형에 맞음새가 우수한 재킷원형을 개발하기 위해 Plus-size 여성복의 재킷 원형 중 4종의 기존원형을 선정하고, 착의 피험자 3인을 대상으로 3차에 걸친 착의실험을 통해 연구 원형을 개발하고 평가단을 구성해 객관적인 평가 33문항에 대한 외관 관능검사를 실시하였다. 1) 가슴둘레 여유분을 8~9cm, 허리둘레 여유분을 6~7cm, 엉덩이둘레 여유분을 6~8cm로 적용하여 맞음새를 향상시켜 날씬해 보이는 효과를 높였다. 2) 진동깊이 계산식은 (B/10+10.5)+2cm 적용하고, 진동두께 계산식은 (B/8-1.5)+2cm를 적용함으로써 진동깊이와 진동두께의 편차가 작아짐으로 인해 소매부위와 진동부위의 맞음새를 향상시켰다. 3) 가슴둘레의 증가에 따라 등길이에 앞길이 치수를 증가시키는 계산식을 설정하여 앞가슴둘레의 맞음새를 향상시켰다. 4) Plus-size여성의 경우 허리부분의 신체적합성을 높이기 위하여 사이드 판넬(side panel)의 재킷원형으로 하였다. 앞 허리와 배 부분의 지방 침착이 크므로 앞 허리둘레 다아트 폭과 앞판 사이드 판넬(side panel) 솔기 다아트 폭을 작게 설정하고, 뒤판 사이드 판넬 솔기 폭을 크게 설정하였다. 5) 어깨끝점 사이길이는 다른 부위의 체지방 침착과 같이 비례적으로 증가하지 않으므로 표준체형에 비해 좁게 설정하였다.

• The Korean Fashion and Textile Research Journal
• /
• v.6 no.3
• /
• pp.399-403
• /
• 2004

Education of clothing and textiles in the university is various according to the purposes. Among that clothing construction and practice is what is needed the most in understanding the process of apparel producing, and is the basic subject of areas from apparel designs to quality management. Producing apparel starts from planning the bodice pattern according to the human body shape. Basic bodice pattern should be highly practical so that production of all items of apparel patterns can be possible. Also, a basic bodice pattern needs to be planned in the way that even beginners can use it by classifying sizes according to each body measurements. Thus in this study. bodice patterns will be produced in way of draping method subjecting university students in early 20s. standardized and classified sizes will be calculated from it and bodice pattern made by studied flat pattern method will be examined and compared so that finally suitability will be compared. As a result of examining and comparing bodice patterns made by draping method and studied flat pattern method on the model of the human body produced by plaster method, sizes were classified into 5 levels. As a result of evaluation of creation. satisfying consequence from various body shape was acquired and it is expected of the beginners who are stating from clothing construction and practice to be educated by using the result of this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.68-75
• /
• 2008

The three-dimensional structure of detonation wave propagating in a circular tube was investigated using a parallel computational code developed previously. A series of parametric study for a circular tube of a fixed diameter gave the formation mechanism of the detonation cell structures depending on pre-exponential factor, k. The unsteady results in three-dimension showed the mechanisms of two, three and four cell mode of detonation wave front structures. The detonation cell number was increased but cell width and length were decreased with increased pre-exponential factor k. In the all multi-cell mode, the detonation wave structure and smoked-foil records on the wall are made by the moving of transverse waves. The detonation wave front structures have the regular polygon and windmill shapes periodically.

• Journal of Fashion Business
• /
• v.10 no.1
• /
• pp.41-57
• /
• 2006

The purpose of this study were to provide dress forms and men's jacket blocks based on the analysis of their somatotype. As the result of the previous research, based on 1290 males of 20 to 54 year-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth and master size was selected considering appearance frequency. Somatotype YS(master size: height 170cm, chest girth 91cm) and HD1(master size: height 170cm, chest girth 94cm) were selected to develop dress forms and men's jacket block in the study. The procedure and results were follows; 1. The dress forms of somatotype YS and HD1 were provide base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New men's jacket blocks of somatotype YS and HD1 were developed based on the body surface extracted by draping and the result of comparative investigation on the conventional jacket patterns by wearing test. Also the drafting methods of new men's jacket blocks were provided. 3. Wearing test by the sensory evaluation showed that the developed jacket blocks were estimated more highly than existing patterns.

• The Research Journal of the Costume Culture
• /
• v.9 no.5
• /
• pp.770-782
• /
• 2001

The definite objects of this study are as follows; 1. The study presents the methods of the designing collar pattern and bodice pattern by each concrete object after comparing and analyzing the factors among the features which are in need of clothes designing. 2. The object of this study is to make body-suitable ready-made clothes by comparing and analyzing the methods of designing collar pattern and bodices pattern presented by each concrete objects and Bunka Pattern. The results of this study are as follows; 1 . The results of this study developed the body-suitable bodice pattern of bend-forward type, straight type and lean-back type Compared with the Bunka pattern by physical function test, this study was rated high in the aspects of the shape of neck and shoulder. 2. The collar pattern was designed according to each type. The front center rising point of straight type is 2.5cm, lean-back type is 3.0cm and bend-forward type is 1.5cm. Compared with the Bunka pattern by physical function test, this study is rated high in the aspects of the shape. To confirm the increase and change of the measure definitely, the complete examination of each subject is necessary. This developed and investigated pattern must be supplemented more by comparing and analyzing with other pattern and body types.