• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.429-434
• /
• 2000

본 연구에서는 등분포하중을 받는 laminated 박판의 거동해석을 제시하였다. 접착한 두 박판의 비선형 지배방정식을 Von Karman 식을 이용하여 유도하고 박판의 거동을 차분법을 이용하여 수치해석 한다. Interlayer에서의 전단변형을 고려하여 지배방정식에 포함시켜 하중 증분법(load incremental method)으로 기하학 비선형 해석을 수행한다. 하중 증분법에 따른 반복법을 도입하여 비선형 방정식을 해석했다. 해석방법의 타당성을 입증하기 위하여 해석결과들을 기존의 문헌의 결과와 비교, 검토함으로써 본 논문에서 제시한 이론 및 해석방법의 타당성을 입증한다. 차분법의 하중 증분법 알고리즘을 개발하여 예제문제에 대한 수치해석 결과들을 논하였다.(중략)

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.223-229
• /
• 2020

Small-loop EM techniques have been used in many geophysical investigations, including shallow engineering and environmental surveys. Even though geometric and frequency soundings have been widely used, there is a debate regarding the effectiveness of frequency sounding, especially when the coil spacing is small. In this study, we analyzed the effectiveness of geometric as well as frequency soundings via the one-dimensional modeling of small-loop EM surveys. The numerical results reveal that geometric sounding can effectively provide underground information. Conversely, the frequency soundings are only effective when the loop spacing is relatively large, that is, when the induction number is large. On the contrary, the frequency soundings fail to provide any information concerning the subsurface layers if the loop spacing is not large.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.27-35
• /
• 2003

Geometric modeling tool and analysis tool of shell surface have been developed in the different environments and purposes. Thus they cannot be naturally fitted to each other for the integrated design and analysis. In the present study, an integrated framework of geometric modeling, analysis， and design optimization is proposed. It is based on the common representation of B-spline surface patch. In the analysis module, a geometrically-exact shell finite element is implemented. In shape optimization module, control points of the surface are selected as design variables. For the computation of shape sensitivities, semi-analytical method is used. Sequential linear programming(SLP) is adopted for the shape optimization of surfaces. The developed integrated framework should serve as a powerful tool for the geometric modeling, analysis, and shape design of surfaces.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.557-560
• /
• 2020

최근, 광소자에서 공간 변조되는 wavefront profile 특성을 광소자의 표면 단차 변화 없이 단일 두께 박막 상에서 자유로이 구현할 수 있는 기하위상 홀로그램 (geometric phase hologram) 기반의 optical component에 대한 관심이 증대되고 있다. 특히 이를 이용해 제작된 기하위상 렌즈 (geometric phase lens)는 dynamic phase의 공간적 차이에 의해 구현되던 기존 bulk optics 기반의 lens 대비 초박형으로 제작이 가능한 파장 선택적 flat optics 기술로써, 다초점 및 경량화를 요구하는 차세대 디스플레이 기술 (augmented reality 또는 AR, mixed reality 또는 MR) 및 광파변조 및 제어를 요구하는 홀로그래픽 카메라 분야에 대한 응용처로 많은 주목을 받고 있다. 이에 본 논문에서는 해당 기하 위상렌즈에 대한 원리 및 이에 따른 개발이슈 및 해결법에 대해 연구 하였으며, 이에 대한 응용처로 기하위상 렌즈의 편광에 따른 이중초점특성을 이용해, 기존 단일 초점 형성이 가능한 AR기기 대비, 다초점 형성이 가능한 switchable dual-depth 3D AR device를 compact한 모듈과 함께 구현하였다. 또한, 기하위상렌즈의 광파 변조 및 분리특성을 이용한 기하위상 렌즈기반의 자가간섭 홀로그래픽 시스템(GP-self-interference incoherent digital holographic, GP-SIDH)에 편광 이미지센서 적용과 함께 맞춤형 설계/제작된 기하 위상렌즈를 적용함으로써, 기존 GP-SIDH 시스템대비 안정적으로 실시간 복소 홀로그램 획득이 가능한 실시간 공간영상정보 획득용 GP-SIDH을 동영상 프레임으로 구현하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.39-49
• /
• 1993

In order to present the geometrically nonlinear F.E. formulation of space frames, two beam/column elements including the effects of transverse shear deformation and bending stretching coupling are developed. In the case of the first element (Finite segment method), the tangent stiffness matrices are derived by directly integrating the equilibrium equations, whereas in the case of the second element (Finite element method) elastic and geometric stiffness matrices are calculated by using the hermitian polynomials including shear deformation effect as the shape function. Both elements possess the usual twelve degrees of freedom. Also, the bowing function including shear deformation effects is obtained in order to account for the effect of shortening of member chord length due to the bending and torsional behavior. Numerical results are presented for the selected test problems which demonstrate that both elements represent reliable and highly accurate tools.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.69-77
• /
• 2008

This article proposes new method for estimating pedestrian quality of service(QOS) that is useful to changing pedestrian environment by examining pedestrian quality of service as well as developing new method that integrate qualitative variables into the estimating indicators for the pedestrian movement right. Based on survey questionnaire addressed to experts group, the obtained data for the indicators were analyzed through Analytic Hierarchy Process(AHP). The results show that pedestrian traffic flow(quantitative figure: 52%), sidewalk geometric(quantitative figure: 16%), sidewalk usage behavior(qualitative figure: 11%) in commercial and business zone pointed out the importance of quantitative indicators such as pedestrian traffic flow, and sidewalk geometric. In addition, the results also show that pedestrian traffic flow(quantitative figure: 30%), sidewalk geometric(quantitative figure : 22%), sidewalk usage behavior(qualitative figure: 20%) indicate the significance of qualitative indicators such as pedestrian's sidewalk usage.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.1
• /
• pp.25-35
• /
• 2018

Resisting strength of ring-stiffened cylindrical steel shell under uniform external pressure was evaluated by geometrically and materially nonlinear finite element method. The effects of shape and amplitude of geometric initial imperfection, radius to thickness ratio, and spacing of ring stiffeners on the resisting strength of ring-stiffened shell were analyzed. The resisting strength of ring-stiffened cylindrical shells made of SM490 obtained by FEA were compared with design strengths specified in Eurocode 3 and DNV-RP-C202. The shell buckling modes obtained from a linear elastic bifurcation FE analysis were introduced in the nonlinear FE analysis as initial geometric imperfections. The radius to thickness ratios of cylindrical shell in the range of 250 to 500 were considered.

• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.217-224
• /
• 1999

우리나라의 경우 각종 장해와 주년 수요의 증가에 따른 불시재배의 증가로 인하여 저온신장성, 병해저항성 등과 같이 작물의 내성증진을 목적으로 접목묘의 이용이 급속도로 신장되고 있다. 특시 연작장해가 심한 박과형 채소류는 대부분 접목재배가 필요한 실정이다. 그러나 국내의 경우, 접목작업은 거의 수작업으로 행해지며 세밀한 조작과 숙련성 그리고 많은 노력을 필요로 한다. 따라서, 접목 생산성을 높일 수 있는 저가의 자동화 시스템 개발이 요구된다. 다양한 접목법들 중 현재 농가에서 가장 광범위하게 이용되고 있는 호접은 삽접 및 절단접에 비하여 자동화가 어렵고 활착 후 절단작업이 부가적으로 필요하나 접목 후 순화공정이 간단하고 활착률이 높다. 본 논문에서는 호접과 삽접에 대하여 접목 후의 활착률 및 접목에 소요되는 작업시간을 비교하였고, 호접법에 의거하여 작업공정을 생력화한 육묘 자동접목 시작기를 개발하였다. 시작기는 농가조합 및 중규모 육묘장의 설비를 지향하여, 묘판 및 접목묘의 취급을 제외하고 1인 접목작업 형태의 자동화 시스템으로 개발하였다. 시작기는 크게 버퍼기능을 부착한 배치형 육묘장치부, 2세트에 공압 매니퓰레이터, 대목과 접수의 원할한 접목을 위해 설계한 특수 그리퍼, 각고 조절형 절단부, 진동형 클립공급부 그리고 자동 클립 장착장치로 구성하였다. 접목 작업시간은 대략 4ch 정도이나 작업시간의 조정이 가능하도록 하였다. 실험실에서 수행한 간이접목 시험 결과, 절단날이 대목과 접수의 접촉부위를 관통할 때 접촉면이 서로 어긋나는 경우가 발생하였으나 육묘들이 호접에 적정한 기하학적 물성 요건을 갖춘다면 80% 이상의 접목 육묘의 기하학적 물성에 따른 체계적인 접목시험이 필요하다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.1-10
• /
• 1988

A higher order plate bending finite element using cubic in-plane displacement profiles is proposed for geometrically nonlinear analysis of thin and thick plates. The higher order plate bending element has been derived from the three dimensional plate-like continuum by discretization of the equations of motion by Galerkin weighted residual method, together with enforcing higher order plate assumptions. Total Lagrangian formulation has been used for geometrically nonlinear analysis of plates and consistent linearization by Newton-Raphson method has been performed to solve the nonlinear equations. The element characteristics have been computed by, selective reduced integration technique using Gauss quadrature to avoid shear locking phenomenon in case of extremely thin plates. Several numerical examples were solved with FEAP macro program to demonstrate versatility and accuracy of the present higher order plate bending element.