• The Journal of the Acoustical Society of Korea
• /
• v.8 no.1
• /
• pp.23-30
• /
• 1989

Propagation phenomena of nonlinear pressure waves in a bubbly mixture are studied. The governing equations for a bubbly mixture are derived heuristically and energy equation is incorporated with other governing equations to take thermal effects into consideration inside the bubble. This non-isothermal condition of the bubble inside is especially important when high amplitude pressure waves are treated. Keller's equation is adapted for the bubble dynamics as practical problem. Some numerical simulations are carried out for the shock tube problem using a computer program based on the above model. A comparison with experimental results of Noordzij and van Wijngaarden shows that the structure of the wave in the shock tube experiment seems to be much more significantly affected 요 the complex heat transfer phenomena inside the bubbles than by the relative translational motion between bubbles and surrounding liquid.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2524-2528
• /
• 2013

Cell opening characteristics dependent on the cell openers for the conventional formulation of a closed-cell polyurethane foam (PUF) was studied using 1-butanol and lithium salt of 12-hydroxystearic acid (Li-12HSA) as the reactive cell opening agents. While cell openining content of only 10.5 % was obtained for the sample with 4 phr of 1-butanol as the single reactive cell opener, that of 98.0% could be obtained for the sample with 2 phr of Li-12HSA as the reactive co-cell opener. As the results, it showed that a fully open-cell rigid PUF could be obtained by introducing a novel reactive cell opener, having a functional group able to form a bulky side-chain on the urethane networks, without severe loss of mechanical properties of the closed-cell PUF like cell size, bulk density, and thermal conductivity.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.720-726
• /
• 2009

Hydrodynamic similarity was investigated in pressurized three-phase slurry bubble columns by selecting the bubble holdup and pressure drop as objective functions, for the effective design and scale-up of it. In addition, effects of operating variables on the bubble holdup with variation of column diameter were also analyzed. Gas velocity($U_G$), viscosity(${\mu}_{SL,eff}$) and surface tension(${\rho}_{SL}$) of slurry phase, density difference between the slurry and gas phases(${\rho}_{SL}-{\rho}_G$) depending on the operating pressure, pressure drop per unit length(${\Delta}P/L$), column diameter(D) and gravitational acceleration(g) were chosen as governing parameters in determining the bubble holdup and pressure drop in the column. From the dimensional analysis, four kinds of dimensionless groups were derived from the 7 parameters and 4 fundamental dimensions. Effects of dimensionless groups such as Reynolds, Froude and Weber numbers on the bubble holdup in the column were discussed. The pressure drop and bubble holdup could be predicted from the correlation of dimensionless groups effectively, which could be used as useful information for the design and scale-up of pressurized slurry bubble columns.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.3
• /
• pp.35-42
• /
• 2001

배관 내에 압축공기를 주기적으로 분사하여 맥동현상이 일어나도록 하면서 기포를 발생시켜 기포가 관의 내벽에서 성장하여 파괴될 때 관내에 부착된 이물질을 제거할 수 있고, 또한 세척효과를 높이기 위하여 관의 벽면에 접촉하면서 배출되는 과정에서 이물질을 제거할 수 있는 장치를 이용한 세척방법의 적용성에 대해서 고찰하고자 한다.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1033-1040
• /
• 2005

Protein function of ovotransferrin with various pH and temperature, and its antimicrobial characteristics were determined. Foaming ability of ovotransferrin was high in alkali condition (pH 11), then diminished as time follows. In acidic condition (pH 3.0), very little amount of foam was produced and disappeared promptly in 30min. However, neutral condition (pH 7.0) was revealed as the best area for foam production and foam stability of ovotransferrin. Temperature effect on foam stability of ovotransferrin showed that the highest foam was produced at 60℃. Ovotransferrin was shown weak antimicrobial activity against E. Coli, S .typhi, P. aerug and Candida albicans at dose of 12.5mg/ml and 25mg/ml. Anti-microbial effect of ovotransferrin with either lysozyme or albumine on pathogenic bacteria and fungi shows that the most effective dose was 25mg/ml, especially on S. typhi and C. albicans.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.495-498
• /
• 1998

수중폭발성음원인 SUS(signal underwater sound)는 수중에서의 폭발과 동시에 충격파와 기포파들이 연속적으로 발생한다. 이러한 신호는 광범위한 주파수대역을 가지고 전파거리가 길어지면서 굴절과 반사등의 다중경로 전파효과에 의한 신호의 변형까지 생긴다. (1,2,3). 본 연구에서는 deconvolution 방법을 이용하여 수신신호중에서 기포파효과를 최소화시켜 충격파의 수신기 도달시간을 파악하고, 각 충격파들의 전파경로를 추정하여 이 중 직접경로와 해저면 반사경로의 신호를 이용하여 해저면 반사계수를 계산하였다.

• The Journal of Engineering Research
• /
• v.8 no.1
• /
• pp.31-50
• /
• 2006

Shrinkage may cause cracking in concrete. In practice such cracking must be considered in most concrete applications because, under normal conditions, drying of the concrete is unavoidable, and when drying takes place shrinkage occurs. Cracked concrete is an inferior concrete because it is weaker, more permeable, and more susceptible to chemical attack. The development of the strength of LAC with aging depends on a few factors such as type of the cement, W/C ratio, curing conditions and periods. The higher the strength of LAC, the lower the possibility of shrinkage cracking. Hence, the strength of LAC in the hypocaust system depends to a large extent on the effect of cracking decrease of the antifoaming rate to drying shrinkage in cement.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.507-515
• /
• 2017

This study is to develop a high quality lightweight foamed concrete that can be applied in the field using EXFG by cracking reducing agent combined with FGD and ALS. First, to increase the volume of foam, the flow and density of the mixture was increased and decreased, respectively. At this time, the effect of substitution ratio of EXFG on fluidity was negligible. The fraction of foam was the highest at EXFG 1%, and the settlement was found to be prevented by the expansion reaction at EXFG 1%. At this time, the ratio of foam was 65%. In the compressive strength, the strengths were similar or decreased when the substitution ratio of EXFG was more than 1%. The apparent density satisfied the KS 0.5 type at the bubble contents was 65%. In case of EXFG substitution, dry shrinkage was decreased by about 10%. As the substitution ratio of EXFG increased, the thermal conductivity increased proportionally.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.33-33
• /
• 2012

소비자의 기호에 따른 섬유 제품은 고급스러운 감촉 및 착용감, 신축성 등 기능성 측면이 증대되어 의류 및 인테리어용에 니트 제품 및 세데니아 원단의 수요가 급증하고 있다. 그러나 니트 제품은 조직이 복잡하며 장력에 의해 형태 변화가 심해 제품 개발에 대한 문제점이 발생하고 세데니아 원단 또한 장력에 매우 민감하다. 특히 정련/염색시 고부가가치 제품의 품질문제에 영향을 미치며, 제품손상과 불량률이 문제점으로 대두되고 있다. 나노버블은 기포의 크기가 작고 에너지를 보유하고 있기 때문에 생지에 부착되어있는 호제들과 쉽게 결합할 뿐 아니라 생지로부터 쉽게 분리시킴으로써 정련성을 높이는 역할을 수행하게 된다. 정련제와 결합된 나노버블은 정련시 물에 잘 용해되지 않는 스판오일, 방사유제등을 잘 흡착하여 분리시키기 때문에 정련효과를 병행해서 얻을 수 있다. 즉 정련효과가 현저하게 향상됨으로써 정련제의 양도 기존의 정련 방식에 비하여 적게 사용하여도 동일한 정련효과를 얻을 수 있었다. 발생기포의 양을 조절할 수 있어 소포제 없이도 기포발생에 의한 현장사고를 방지함으로써 고품질의 정련제품을 얻을 수 있었다. 또한 기존 정련기술에 비해 정련시간 단축으로 인한 에너지 절감효과 및 이산화탄소 배출량 감소, 나노사이즈의 버블의 높은 분산력으로 과량의 수세공정 생략 등 친환경적 정련/염색 공정이 가능하다.

• Geophysics and Geophysical Exploration
• /
• v.26 no.1
• /
• pp.8-17
• /
• 2023

Various sources, such as wind, waves, ships, and gas leaks from the seafloor, forms bubbles in the ocean. Underwater bubbles cause signal scattering, considerably affecting acoustic measurements. This characteristic of bubbles is used to block underwater noise by attenuating the intensity of the propagated signal. Recently, researchers have been studying the large-scale release of methane gas as bubble plumes from the seabed. Understanding the physical properties and distribution of bubble plumes is crucial for studying the relation between leaked methane gas and climate change. Therefore, a water tank experiment was conducted to estimate the distribution of bubble plumes using seismic imaging techniques and acoustic signals obtained from artificially generated bubbles using a bubble generator. Reverse time migration was applied to image the bubble plumes while the acquired acoustic envelope signal was used to effectively estimate bubble distribution. Imaging results were compared with optical camera images to verify the estimated bubble distribution. The water tank experiment confirmed that the proposed system could successfully image the distribution of bubble plumes using reverse time migration and the envelope signal. The experiment showed that the scattering signal of artificial bubble plumes can be used for seismic imaging.