• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.888-893
• /
• 2004

The effect of irradiation and packaging methods (vacuum vs aerobic) on microbial growth, electron donating ability, and lipid oxidation in marinated beef rib (Galbi) was investigated. The total aerobic bacteria in Gazlbi reduced significantly with the increase of irradiation dose, and the effect was more significant in the Galbi with vacuum packaging, The pH showed a decreasing trend during storage and this change was more significant in the Galbi with aerobic packaging. Electron donating ability of Galbi was reduced by irradiation in aerobic packaging but no difference was found in vacuum packaging except 7 days. The 2-thiobarbituric acid reactive substances (TBARS) value of Galbi increased by irradiation in aerobic packaging during storage time, but that of vacuum packaging was maintained an initial value. Results indicated that irradiation coupled with vacuum packaging may enhance the microbial safety of Korean traditional meat products, Galbi, with minimum quality changes during storage.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.25-35
• /
• 2006

This paper investigates the mechanical characteristics of reinforced lightweight soil (RLS) using waste fishing net. RLS used in this experiment consists of dredged soil taken from construction site of Busan New Port, cement, air foam and waste fishing net. Several series of laboratory tests were performed to compare behavior characteristics between RLS and unreinforced lightweight soil, in which the reinforced effect by waste fishing net on RLS was evaluated. The experimental results of RLS indicated that the stress-strain relationship and the unconfined compressive strength are strongly influenced by the content of waste fishing net. Compressive strength of RLS Increased with the increase in curing time and generally increased by adding waste fishing net, but the amount of increase in compressive strength was not proportional to the content of waste fishing net. In this test, the maximum increase in compressive strength was obtained at 0.25% content of waste fishing net. On the other hand, water content of RLS rapidly decreased up to 7 days of curing time and converged to constant value.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.874-882
• /
• 2019

In this study, the gasification characteristics of four types of unused woody biomass and one waste wood in a lab-scale bubbling fluidized bed gasifier (Diameter: 0.11 m, Height: 0.42 m) were investigated. Effect of equivalence ratio (ER) of 0.15-0.3 and gas velocity of $2.5-5U_0/U_{mf}$ are determined at the constant temperature of $800^{\circ}C$ and fuel feeding rate of 1 kg/h. The silica sand particle having an average particle size of $287{\mu}m$ and olivine with an average particle size of $500{\mu}m$ were used as the bed material, respectively. The average product gas composition of samples is as follows; $H_2$ 3-4 vol.%, CO 15-16 vol.%, $CH_4$ 4 vol.% and $CO_2$ 18-19 vol.% with a lower heating value (LHV) of $1193-1301kcal/Nm^3$ and higher heating value (HHV) of $1262-1377kcal/Nm^3$. In addition, it was found that olivine reduced most of C2 components and increased $H_2$ content compared to silica sand, resulting in cracking reaction of tar. The non-condensable tar decreases by 72% ($1.24{\rightarrow}0.35g/Nm^3$) and the condensable tar decreases by 27% ($4.4{\rightarrow}3.2g/Nm^3$).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.8-18
• /
• 2003

An experimental study is carried out to investigate the Reynolds number effects on the near-wake of an airfoil oscillating in pitch. An NACA 4412 airfoil is sinusoidally pitched about the quarter chord point between the angle of attack -6$^{\circ}$ and +6$^{\circ}$. A hot-wire anemometer is used to measure the turbulent intensity in the near-wake region of an NACA 4412 airfoil. The freestream velocities of present work are 3.4, 12.4, 26.2 m/s, and the corresponding Reynolds numbers are $5.3{\times}10^4,\;1.9{\times}10^5,\;4.1{\times}10^5$ and the reduced frequency is 0.1. Axial turbulent intensity profiles are presented to show the Reynolds number effects on the near-wake region behind an airfoil oscillating in pitch. All the cases in these measurements show that the turbulent intensities by the change of the Reynolds number are very large at the lowest Reynolds number $R_N=5.3{\times}10^4$; and are small at the other Reynolds number $(R_N=1.9{\times}10^5\;and\;4.1{\times}10^5)$ in the near-wake region. The significant difference of turbulent intensity between $R_N=5.3{\times}10^4,\;and\;1.9{\times}l0^5$ is observed. A critical value of the Reynolds number in the near-wake of an oscillating NACA 4412 airfoil which indicates laminar separation, no separation or turbulent separation exists in the range between $R_N=5.3{\times}10^4\;and\;1.9{\times}10^5$.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.960-968
• /
• 2012

In this study, the measurement of physical properties of 3 different ethylene oxide adducted zwitterionic surfactants were measured such as critical micelle concentration, surface tension, interfacial tension, contact angle, viscosity and foam stability. Also, the dual function characteristics of the zwitterionic surfactants were investigated by determining an isoelectric point, which were obtained using zeta potential measurement and QCM (quartz crystal microbalance) experiments. The isoelectric point of the synthesized zwitterionic surfactant determined by zeta potential measurement was close to that obtained by QCM experiment and both results have shown almost the same trend as that determined by the frictional property measured using an automated mildness tester. In particular, it has been observed that all three surfactants used during this study provide better softening effect at a pH of neutral condition than at an acidic or an alkaline condition. This result indicates that the synthesized surfactants act as a cationic surfactant at a pH of neutral condition and thus provide good softening effect during a rinsing cycle in the detergency process.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.209-216
• /
• 2009

The aim of this study was to investigate the removal effects of the color, nutritive salts and other pollutants on piggery slurry by advanced oxidation process (AOP) system. The experimental AOP system was designed to treat 300 L of piggery slurry per hour. To enhance oxidizing power of the experimental APO system, a ultraviolet irradiation system and the ultrasonic system were attached to the AOP system. With 5 min ultrasonic treatment, COD, SS and T-N concentrations were changed from 210, 820, and 309 to 200, 760, and 262 mg/L, respectively. With 10 min ultrasonic treatment, SS and T-N concentrations tended to decrease but T-P concentration was not changed. With the treatment of both ozone and ultrasonic waves for 30 min, COD, SS, T-N and T-P decreased from 238, 900, 400, and 5 to 165, 540, 263, and 4 mg/L, respectively. With the treatment of both ozone and ultraviolet irradiation for 30 min, COD, SS, T-N and T-P decreased from 321, 340, 204, and 15 to 151, 140, 111, and 7 mg/L, respectively, and color was changed from 4,344 to 624.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.40-40
• /
• 2000

우리나라의 제지산업은 천연펄프 자급능력이 20% 내외로서 낮은 실정이며 주원료의 7 70% 이상을 수입펄프와 고지에 의존하는 원료수급의 불균형이 심화된 상태이다 .. 1999년도 제지통계에 의하면 골판지 원지로 사용되는 라이너지와 골심지의 연간 생산량이 각각 169만 톤과 88만톤을 점유하여 국내 전체 지류생산량 887만톤의 약 29%를 점하고 있다. 이처럼 국내 제지산업에서 큰 비중을 차지하는 골판지 원지는 주로 국내에서 발생되는 고지를 원료 로 하여 생산되고 있어 환경친화적인 지류라 할 수 있다. 그러나, 국산 골판지 고지( Korean O Old Corrugated Container)의 경우 골판지 고지 이외에 각종 인쇄고지와 기타 산업용지가 혼합된 최하급지로서, 고지 재생 시 여러 가지 많은 제한요소를 지니고 있다. 국산 골판지 고지는 거듭된 재생처리로 인하여 미세분의 함량이 전체 지료의 절반에 달할 만큼 많으며, 아울러 섬유가 각질화됨에 따라 재생처리가 거듭될수록 그러한 미세분의 형성이 더욱 조장 되고 있다. 일반적으로 크기 75µm 이하의 무기질 및 단섬유를 일걷는 미세분은 골판지 원지 의 초지시 습지필의 탈수를 저해하여 생산성을 저하시키는 요인이 되어 왔다. 이러한 문제 를 해결하기 위해 선진국에서는 골판지 고지를 스크린 또는 클리너 둥으로 정선 처리하여 장단섬유를 분급한 다음, 장섬유분을 선택적으로 고해하여 종이의 강도를 향상시키는 기술 이 개발되어 적용돼 왔으나, 이러한 기술은 우리 나라와 같이 장섬유 보다 미세분 함량이 많은 저급의 골판지 고지를 주원료로 삼는 골판지 원지의 강도 개선에 큰 효과를 거둘 수 없는 기술이라고 판단된다. 이는 기존의 섬유 분급 처리는 고급 고지의 경우에는 효과적이 나 저급의 혼합고지를 100% 재활용하여 구성되는 국산 골판지의 생산 시에 적용하기에는 5 50-60%에 이르는 미세분이 포함되어 분리의 대상이 섬유장이 다른 펼프 섬유라기 보다는 미세섬유를 펄프섬유로부터 분리하는 것이 필요하기 때문이다. 이러한 문제점을 극복하기 위해서는 기포의 수력학적 포집작용을 이용하여 고농도의 미세분을 선택적으로 분급시키는 부상부 유 분급처리방법을 적용하였다. 이 방법은 미세분의 농축을 위한 부가적인 처리가 필요치 않으며, 분급에 천공을 이용하지 않기 때문에 분급처리 시 천공의 plugging 문제가 발생되 지 않는다는 장점도 가지고 있다. 미세분 분급을 위한 최적의 부상부유 조건은 장섬유의 응 집을 촉진하면서 미세분은 그러한 응집체에 포함되지 않은 상태로 자유로이 부상하여 걷혀 지는 경우이다. 응집거동을 조절하기 위한 시도로서 부상부유 처리시 유량을 달리한 실험결 과에 의하면 유량이 낮을수록 장섬유 손실이 줄고 미세분이 선택적으로 포집되나 전체 부상 부유 리젝트의 양이 줄어드는 문제점이 있었다. 이에 본 실험에서는 장섬유의 응집에 영향 하는 또 다른 인자로서 지료의 농도를 증가시키면서, 미세분의 부상부유를 촉진시키도록 유 량을 증가시키는 조건으로 부상부유 처리에 의한 미세분 분급효율을 증가시키고자 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1107-1113
• /
• 2018

Ultrasonography and photodynamic therapy have been proposed as useful tools as a treatment for inducing necrosis of cells using reactive oxygen species. Apoptosis is an internal mechanism necessary for cells regardless of damage. Ultrasound has the effect of inducing the apoptosis of these cells, and the frequency of 1 MHz is the most applicable area for medical use. The laser which is generally used in photodynamic therapy has a heat reaction and the treatment is limited. However, as a small light emitting diode is developed, it shows possibility to minimize the equipment and reduce heat reaction. On the other hand, there are relatively few researches on direct effects of light compared with studies using photosensitizers, and the area is also limited. Therefore, in this paper, we have developed a cancer cell proliferation control module using ultrasonic and light emitting diodes, which have relatively few side effects, and quantitatively analyze the effect of the module to propose an optimal suppression technique.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.455-463
• /
• 2012

In this study, the measurement of physical properties of ethylene oxide-propylene oxide adducted zwitterionic surfactants were measured such as critical micelle concentration, surface tension, interfacial tension, contact angle, viscosity and foam stability. Also, the dual function characteristics of a zwitterionic surfactant were investigated by determining an isoelectric point, which were obtained using zeta potential measurement and QCM (quartz crystal microbalance) experiments. The isoelectric point of DEP-OSA82-AO zwitterionic surfactant determined by zeta potential measurement was close to that obtained by QCM experiment and both results have shown almost the same trend as that determined by the frictional property measured using an automated mildness tester. In particular, it has been observed that DEP32-OSA82-AO and DEP34-OSA82-AO surfactants provide better softening effect at a pH of acidic or neutral condition than at an alkaline condition. This result indicates that both surfactants act as a cationic surfactant at a pH of acidic or neutral condition and thus provide good softening effect during a rinsing cycle in the detergency process.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.494-500
• /
• 2003

The effects of $Al_2$O$_3$ addition upon the sintering range of clay-EAF dust (the specified wastes produced from steel making process) system body which would be used as a constructing bricks were investigated. The slope of apparent density to sintering temperature decreased for Clay-dust body containing 5~15 wt% A1203 sintered at 1200-125$0^{\circ}C$, and the absorption(%) of specimen sintered above 125$0^{\circ}C$ decreased due to the formation of open pores produced by pore bloating. For the specimen without any $Al_2$O$_3$ addition sintered at 1275$^{\circ}C$, the major phase was cristobalite, the small amount of mullite (3Al$_2$O$_3$ 2SiO$_2$) formed and the hematite (Fe$_2$O$_3$) remained. In the Clay-dust system body containing $Al_2$O$_3$ 15 wt%, however, the cristobalite disappeared and the major phase was mullite. Also the part of $Al_2$O$_3$ reacted with hematite to form hercynite (FeAl$_2$O$_4$). From the these results, addition of $Al_2$O$_3$ to Clay-dust system body enlarges a sintering range; decreasing an apparent density and absorption slop to sintering temperature owing to consumption of liquid phase SiO$_2$ at higher temperature and gas-forming component Fe$_2$O$_3$ at reduced atmosphere which would decrease an amount of liquid formed and increase the viscosity of the liquid produced during the sintering process.