• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.590-590
• /
• 2015

본 연구는 집중호우에 의한 홍수예측 및 소유역의 유출거동에 대한 수문학적 민감성(susceptibility) 규명을 목적으로 강우강도, 지속기간 및 토양포화도 변화에 따른 홍수유출특성을 분석하여 유역의 유출거동 민감성을 표출할 수 있는 노모그래프를 개발하였다. 개별 홍수사상에 대한 유출거동 특성 분석을 위하여 한국건설기술연구원의 대표 시험유역인 설마천 유역의 과거 17년간(1996 ~ 2012)의 10분 간격의 강우량 및 유출량 자료를 수집하여 홍수유출해석을 수행하였다. 설마천 시험유역의 일누가강우량 100mm 이상, 50개 홍수사상에 대한 홍수유출해석은 유역 물순환 해석모형인 CAT(Catchment hydrological cycle Assessment Tool)을 이용하였으며 모의결과를 바탕으로 홍수사상별 지체시간, 강우강도, 지속기간 및 토양포화도 변화에 따른 홍수유출특성을 상세히 분석하였다. 이 중에서도 지체시간은 유역반응을 나타내는 시간변수로서 수문모델링 및 홍수량예측에 매우 중요한 요소이다. 특히, 강우량에 대한 홍수량의 반응이 빠른 소유역의 경우에 홍수량예측에 큰 영향을 미친다. 따라서 강우강도, 지속기간, 토양포화도의 변화량에 대한 지체시간의 거동을 R 프로그래밍 언어 및 3D Surfer를 이용하여 분석한 후 최종적으로 소유역의 홍수유출 특성을 나타내는 3차원 홍수 유출특성 노모그래프를 개발하였다. 분석에 사용된 R 프로그래밍 언어는 통계 계산과 그래픽을 위한 프로그래밍 언어이자 소프트웨어 환경으로 데이터의 조작 및 수치연산, 시각화를 수행할 수 있는 기능을 여러 패키지를 통해 구현할 수 있다. 따라서 본 연구에서는 R을 이용하여 10분 단위의 강우 및 유출량 자료를 1시간 및 1일 자료로 구축하고 17년간의 과거 홍수사상을 분리하여 추출하는 R 홍수유출해석 시스템을 개발하였으며 추출된 홍수사상을 관측 유출량 및 관측 토양수분을 포함하여 시각화함으로써 강우 및 토양수분 변화에 따른 소유역의 유출거동 민감성을 확인할 수 있었다. 분석 결과, 지체시간은 강우지속기간 및 토양포화도에 민감한 거동특성을 나타냈으며 토양포화도는 첨두홍수량의 변화에 민감한 영향을 주는 것으로 확인되었다. 개발된 3차원 홍수유출특성 노모그래프는 유역의 규모 및 지형물리학적 특성에 따라 다양하게 나타날 것으로 판단되며 여러 계측유역에 적용함으로써 유역별 홍수유출 반응특성을 정량화할 필요가 있다. 즉, 강우강도, 지속기간, 지체시간, 포화도 등의 변화에 따른 유역의 홍수유출 반응특성을 규명함으로써 미계측 유역의 홍수량예측 실무에 활용할 수 있을 것으로 판단된다.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.587-595
• /
• 2019

This study analyzed the influence of the environmental factor of each vegetation type in an urban, mountainous park (Tangeumdae Park in Chungju) on air ion. The measuring points were divided according to the tree species, diameter at breast height, crown density, and layered structure, and the meteorological factors and the air ion were measured. The results of the measurement showed the average generation of positive ions of $610.90{\pm}50.27ea/cm^3$, the average generation of negative ions of $723.58{\pm}64.25ea/cm^3$, and the air ion index of $1.19{\pm}0.10$. The results of the analysis, according to the vegetation type, are as follows. Firstly, the air ion varied according to the species, the chest diameter at breast height, and the layered structure, and was analyzed to be statistically significant. Secondly, the air ion and the vegetation type showed a positive correlation with the species, diameter at breast height, crown density, and layered structure. The cation showed a negative correlation with the species, diameter at breast height, and the crown density, and the anion showed a positive correlation with the species, the diameter at breast height, crown density, and layered structure. Thirdly, the ion index in ridges had a higher correlation with the vegetation type than the meteorological factors. In detail, the correlation was higher in the species > layered structure > crown density > diameter at breast height. This study had the limitation of evaluating air ions in the ridge. Therefore, future studies on air ion should consider both terrain structure and vegetation type and analyze the seasonal changes and comparison.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.189-199
• /
• 2021

In order to increase the self-reliance rate of new and renewable energy in order to respond to the mandatory domestic zero-energy buildings, the taller the building, the more limited the site area, and installing PV modules on the roof is not enough. Therefore, BIPV (Building integrated photovoltaic, hereinafter BIPV) is the industry receiving the most attention as a core energy source that can realize zero-energy buildings. Therefore, this study conducted a survey on the problems of the BIPV industry in a self-discussing method for experts with more than 10 years of experience of designers, builders, product manufacturers, and maintainers in order to suggest the right direction and revitalize the BIPV industry. Industrial problems of BIPV adjustment are drawn extention range of standard and certification for products, range improvement for current small condition of various kind productions, need to revise standards for capable of accomodating roof-type, color-module and louver-module, necessary of barrier in flow of foreign modules into korea through domestic certification mandatory, difficulty in obtaining BIPV information, request to prevent confusion among participants by exact guidelime about architectural application part of BIPV, and lack of the BIPV definition clearness, support policy, etc. Based on the improvements needed for the elements, giving change and competitiveness impacts aims to present and propose counter measures and direction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.268-275
• /
• 2021

The three factors that determine the strength of concrete are the strength of cement paste, aggregate and ITZ(Interfacial Transition Zone) between aggregate and cement paste. Out of these, the strength of ITZ is the most vulnerable. ITZ is formed in 10~50㎛, the ratio of calcium hydroxide is high, and CSH appears low ratio. A high calcium hydroxide ratio causes a decrease in the bond strength of ITZ. ITZ is due to further weak area. The problem of ITZ appears as a more disadvantageous factor when it used lightweight aggregate. The previous study of ITZ properties have measured interfacial toughness, identified influencing factors ITZ, and it progressed SEM and XRD analysis on cement matrix without using coarse aggregates. also it was identified microstructure using EMPA-BSE equipment. However, in previous studies, it is difficult to understand the microstructure and mechanical properties. Therefore, in this study, a method of measuring electrical resistance using EIS(Electrochemical Impedance Spectroscopy) measuring equipment was adopted to identify the ITZ between natural aggregate and lightweight aggregate, and it was tested the change of ITZ by surface coating of lightweight aggregate with ground granulated blast furnace slag. As a result, the compressive strength of natural aggregate and lightweight aggregate appear high strength of natural aggregate with high density, surface coating lightweight aggregate appear strength higher than natural aggregate. The electrical resistivity of ITZ according to the aggregate appeared difference.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.11
• /
• pp.475-489
• /
• 2019

This study seeks to explore the method of imagination through creative new thinking in cultural heritage education and the most effective model of education in education. Research methods were organized by the methods of reviewing literature, browsing the Internet, and comparative analysis of prior research. We hope to realize the need for differentiated Korean cultural heritage and make efforts to incorporate our identity in the design. Through this study, we hope to realize the need for differentiated Korean cultural heritage and make efforts to incorporate our identity in the design. In the process of visualizing information, the focus should be on identifying the structure, characteristics, and the correlation between pattern and trend analysis, and the heterogeneity analysis, and should be made with the characteristics considered. Texting, graphics, sound, animation, lighting, and Navigation are often used as the expressive elements of information visualization for educational models. To facilitate the understanding of learners, accurate information transmission visuals should be presented. To do so, the use of infographic can be the answer. It is necessary to develop appropriate multimedia visual data, such as the use of infographic to be applied, and to develop various infographic multimedia visuals. These work should not be merely a research dimension, but should be carried out with the aim of helping develop actual cultural heritage educational content.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.267-277
• /
• 2019

Photogrammetry and computer vision are identical in determining the three-dimensional coordinates of images taken with a camera, but the two fields are not directly compatible with each other due to differences in camera lens distortion modeling methods and camera coordinate systems. In general, data processing of drone images is performed by bundle block adjustments using computer vision-based software, and then the plotting of the image is performed by photogrammetry-based software for mapping. In this case, we are faced with the problem of converting the model of camera lens distortions into the formula used in photogrammetry. Therefore, this study described the differences between the coordinate systems and lens distortion models used in photogrammetry and computer vision, and proposed a methodology for converting them. In order to verify the conversion formula of the camera lens distortion models, first, lens distortions were added to the virtual coordinates without lens distortions by using the computer vision-based lens distortion models. Then, the distortion coefficients were determined using photogrammetry-based lens distortion models, and the lens distortions were removed from the photo coordinates and compared with the virtual coordinates without the original distortions. The results showed that the root mean square distance was good within 0.5 pixels. In addition, epipolar images were generated to determine the accuracy by applying lens distortion coefficients for photogrammetry. The calculated root mean square error of y-parallax was found to be within 0.3 pixels.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.93-113
• /
• 2019

The behavior of the 3 hinged precast arch structure was investigated by comparing field measurements with numerical analyses performed for precast lining arch structures, which are widely used for the open-cut tunnel. According to the field measurements, the maximum vertical displacement occurred at the crown with upward displacements during the backfilling up to the crown of the arch and downward displacements at the backfill height above the crown. The final crown displacement was 19 mm upward from the original position. The horizontal displacement at the sidewall, which had a maximum horizontal displacement, occurred inward of the arch when compacting the backfill up to the crown and returned to the original position after completing the backfill construction. According to the analysis of displacement measurements, economical design is expected to be possible for precast arch structures compared to rigid concrete structures due to ground-structure interactions. Duncan model gave good results for the estimation of displacements and deformed shape of the tunnel according to the numerical analyses comparing with field measurements. The earth pressure coefficients calculated from the numerical analyses were 0.4 and 0.7 for the left and the right side of the tunnel respectively, which are agreed well with the eccentric load acting on the tunnel due to topographical condition and actual field measurements.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.37-44
• /
• 2019

Leaves of Sasa quelpaertensis Nakai are used in folk medicine for their anti-inflammatory, antipyretic, and diuretic properties. To ensure efficient utilization of S. quelpaertensis leaf, we previously reported a preparation method for phytochemical-rich extract (PRE) using the leaf residue, which was produced after hot water extraction. This study was undertaken to evaluate the hypouricemic potential of S. quelpaertensis leaf PRE in potassium oxonate (PO)-induced hyperuricemic mice. The administration of PRE significantly reduced serum uric acid (UA), blood urea nitrogen (BUN), and serum creatinine levels and increased urine UA and creatinine levels in the PO-induced hyperuricemic mice. It also reduced liver UA levels and xanthine oxidase (XA) activity. A histological analysis revealed that PRE administration protected against PO-induced liver damage, pointing to anti-inflammatory and cytoprotective effects in PO-induced hyperuricemic mice. We analyzed the transcriptome response to PRE administration in PO-induced hyperuricemic mice using RNA sequencing (RNA-Seq) in kidney tissues. The administration of PRE mainly enriched genes involved in mediating immune and inflammatory responses and the metabolic pathway. A Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis showed that the metabolic pathway, purine metabolism, and antibody biosynthesis were the major pathways altered in the PRE and PO groups. These results suggest a potential role for PRE in the prevention and treatment of hyperuricemia with inflammation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.125-132
• /
• 2019

This paper presents a seismic reliability analysis method for an offshore wind turbine with a twisted tripod support structure under earthquake loading. A three dimensional dynamic finite element model is proposed to consider the nonlinearity of the ground-pile interactions and the geometrical characteristics of the twisted tripod support structure where out-of-plane displacement occurs even under in-plane lateral loadings. For the evaluation of seismic reliability, the failure probability was calculated for the maximum horizontal displacement of the pile head, which is calculated from time history analysis using artificial earthquakes for the design return periods. The application of the subset simulation method using the Markov Chain Monte Carlo(MCMC) sampling is proposed for efficient reliability analysis considering the limit state equation evaluation by the nonlinear time history analysis. The proposed method can be applied to the reliability evaluation and design criteria development of the offshore wind turbine with twisted tripod support structure in which two dimensional models and static analysis can not produce accurate results.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.33-41
• /
• 2011

In case of building up port facilities on soft ground, unsymmetrical surcharge of embankment, which make the excess pore water pressure to increase, causes to occur lateral displacement due to plasticity of soil. A study on lateral displacement and settlement of the caisson, which is installed on improved ground, was accomplished. The field measurement data and calculated values obtained from FEM program of Plaxis were compared and analyzed. For numerical analysis, the properties of soils, constructions stage and time were considered. Lateral displacement was measured at the point of inclinometers installed in front of caisson. Settlement was measured at the center of extra embankment behind of caisson. Comparison of measured and calculated for lateral displacement showed that the calculated value was greater than the measured, and increasing trend was different. The calculated value showed step increasing as step extra embankment applied, whereas the measured gradually was increased. For settlement of embankment, the amount of both measured and calculated were similar, but the trend was different like that of lateral movement.