• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.94-98
• /
• 2006

미계측 유역에 대한 정확한 수문반응을 예측하기 위해 수문반응 모의할 때 발생하는 불확실성을 예측하고 감소시킬 필요가 있다. 이러한 불확실성은 사용가능한 자료의 질과 양에 따라 달라지므로, 자료의 해상도는 수문반응 예측에서 중요한 요소가 된다. 그러므로 본 연구에서는 격자크기가 수문모형의 강우-유출응답모의에 어떠한 영향을 미치는지 살펴보았다. 격자크기가 입력데이터의 정보 손실을 발생시키지 않는 경우의 모형의 불확실성을 조사하기 위하여, 2차 및 3차 하천차수와 유역면적의 증가를 고려한 4가지 가상유역을 구성 하였다. 50m, 100m, 250m, 500m, 1000m의 격자를 사용하여 강우-유출모의를 수행하고, 격자에 따른 모의결과를 비교하기 위해 유출구의 수문곡선을 작성하였다. 또한, 소유역에서 하천으로 유입되는 단위길이당 유량과 하천의 합류점 전..후 및 유출구의 하천유량에 대한 Nash 계수를 산정하고 비교하였다. 기준이 된 격자크기와의 차가 큰 격자가 사용된 경우 모의된 수문반응의 차이는 증가하였고, 대상 유역의 면적이 커질수록, 하천차수가 작을수록 그 차이는 감소하였다. 소유역에서 하천으로 유입되는 단위폭당 유량의 오차는 흐름길이가 증가할수록 감소하였다. 흐름길이가 일정한 소유역으로만 구성된 가상유역 I, II에 대한 수문모의에서 하천유량의 오차는 하천을 따라 증가한 반면, 각기 다른 흐름길이의 소유역으로 구성된 가상유역 III, IV의 경우, 오차는 하천의 흐름에 따라 일정한 경향을 갖지 않고, 하천의 합류를 통해 증가되거나 감소하였다. 이 경우, 유역 유출구의 총체적 수문반응의 오차는 1차 하천의 합류후 발생한 최대오차보다 작았다.량을 산출하여 하천환경정비를 위한 기초자료로서 활용 될 수 있도록 하였다.구에 맞는 작물 생산 및 농촌관광단지 조성을 통해 부가가치증대 및 소득증대를 꾀함으로 농촌문제 해결에 도움이 될 것으로 기대된다. 본 연구를 통해 GIS 와 RS의 기술이 농촌분야에 더 효율적으로 적용될 것으로 기대되며, 농업기술센터를 통한 정보제공을 함으로써 대농민 서비스 및 농업기관의 위상이 제고 될 것으로 기대된다.여 전자파의 공간적인 가시화를 수행할 수 있었다. 본 전자파 시뮬레이션 기법이 실무에 이용될 경우, 일반인이 전자파의 분포에 대한 전문지식을 습득할 필요 없이, 검색하고자 하는 지역과 송전선, 전철 등 각종 전자파의 발생 공간 객체를 선택하여 실생활과 관련된 전자파 정보에 예측할 수 있어, 대민 환경정보 서비스 질의 개선측면에서 획기적인 계기를 마련할 것으로 사료된다.acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.76-81
• /
• 2018

The Internet of Things (IoT), which is emerging as a future economic growth engine, has been actively introduced in areas close to our daily lives. However, there are still IoT security threats that need to be resolved. In particular, with the spread of smart homes and smart cities, an explosive amount of closed-circuit televisions (CCTVs) have been installed. The Internet protocol (IP) information and even port numbers assigned to CCTVs are open to the public via search engines of web portals or on social media platforms, such as Facebook and Twitter; even with simple tools these pieces of information can be easily hacked. For this reason, a big-data analytics system is needed, capable of supporting quick responses against data, that can potentially contain risk factors to security or illegal websites that may cause social problems, by assisting in analyzing data collected by search engines and social media platforms, frequently utilized by Internet users, as well as data on illegal websites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.762-768
• /
• 2015

This study examined the integration value of a low level pilotis space, a component that has been often selected as an essential planning element of the recent high-rise apartment complex, and compared the main outdoor unit spaces with that of an average integration value of the individual complexes. Furthermore, this study provided the preliminary data for the next level of research, which is the observation of the pilotis space usage behaviors and the frequency of utilization. The results of this present research are as follows. First, from the main outdoor unit spaces of the high-rise apartment complexes including the pilotis space, a 'complex entrance' or a 'plaza' space showed the highest integration value. Second, the spatial integration value of a pilotis space in a high-rise apartment complex was generally lower that of the integration value of other main outdoor units. Third, from the pilotis spaces of the high-rise apartment complex, those with a 'projecting entry access + pilotis addition type' that did not provide an access to the individual units, had the lowest space utilization rate by the inhabitants; thus, had a high likelihood of the spaces becoming used for illegitimate activities or becoming vacant.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1439-1454
• /
• 2004

Recently, Levels of Information Systems Interoperability (LISI) that are used for assessing the information systems interoperability are defined according to the importance of interoperability among information systems. At that time, it is necessary to the construction of an assessment information repository to store and retrieve the interoperability assessment data efficiently. An LISI repository constructed for storing and retrieving an assessment information should support assessment systems that are developed in various Platforms and provide its functions by a standardized way. Business logics of LISI repository should be developed as distributed components, and we need to modify existing software design methods to show characteristics of LISI repository in addition to the standardized LISI data expression. Also a concrete method to recognize various implementation technologies and to apply them to implementation of LISI repository is needed. This paper provides a design method for developing an LISI repository that is considering the characteristics of LISI repository by three concerns, and an implementation scheme that can apply to the integration of the various repository implementation technologies systematically, as the LISI repository development framework for constructing the LISI repository. These help developers to construct the LISI repository effectively by providing concrete guidelines for considerations and appliable methods to construct the LISI repository.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.474-478
• /
• 2009

본 연구는 2008년 맞춤형 방문건강관리사업에 사용되고 있는 관절통증을 중심으로 한 사례관리를 수정 보안하여 우리나라 실정에 맞는 관절통증 사례관리 프로그램을 개발, 제안하며, 맞춤형 방문건강 관리사업의 활성화와 완성도를 높이는데 있다. 연구방법으로는 2007년 전국 12주 관절통증 사례관리 결과자료 분석하고, 전국 253개 보건소의 맞춤형 방문건강관리사업 인력에 대한 자료 분석과 전국 보건소 전문가 자문회의와 토론 결과를 통해 설문지를 수정 보완하여 2008년도 충청남도 관절통증 12주 사례관리를 실시하였다. 자료분석은 SPSS 12.0 통계 프로그램을 이용하여, p-value가 0.05 미만과 0.01미만인 경우를 통계적으로 유의한 것으로 판정하였으며, 전국자료는 빈도분석, wilcoxon 부호순위 검정과 McNemar's 검정을 실시하였으며, 12주의 관절통증 사례관리의 연구기간동안 수집된 자료를 1주와 8주간, 1주와 12주간, 8주와 12주간을 paired t-test 검정과 McNemar's 검정을 실시하여 유의성 평가를 실시하였다. 연구결과는 다음과 같다. 12주 기간 동안 사전 사례관리 방문간호사의 교육을 통한 사례관리 서비스의 강도의 조절 및 매주로 서비스의 횟수를 조절하여 사례관리를 실시한 결과 총 109개 항목에서 1주와 8주간에 유의한 항목은 TG(mg/dl)를 비롯한 51개 항목, 1주와 12주간에는 콜레스테롤(mg/dl)을 비롯한 53개 항목, 8주와 12주간에는 지난 48시간동안 관절통증 점수를 비롯한 3개 항목으로 유의한 차이를 볼 수 있었으며, 1주와 8주간은 유의하나 1주와 12주간은 유의하지 않게 나타나는 항목은 TG(mg/dl)를 비롯한 3개 항목, 1주와 8주간은 유의하지 않다가 1주와 12주간은 유의하게 나타나는 항목은 콜레스테롤(mg/dl)를 비롯한 6개 항목, 1주, 8주, 12주간의 모든 기간에서 유의한 항목은 지난 48 시간동안 관절통증 점수를 비롯한 3개 항목으로 조사되었다. 결론적으로 현재 우리나라에서 추진되고 있는 맞춤형 방문건강관리 사업의 사업지침에 대한 보완을 위해 관절통증사례관리 프로그램에 있어 중재 서비스 또는 프로그램의 기간은 12주간에서 8주간으로 조정 되어야 하며, 추가가 필요한 항목으로는 교육, 자기역량 강화, 운동처방, 물리치료, 약물치료, 대체요법, 식이, 영양, 생활지도 등이며, 어골도 분석을 위한 기본 틀 및 주요 구성요소를 제시 및 기여 요인 및 결정요인을 위한 논리적 모형 제시가 필요하며, 개선목표를 위한 유지증진 및 관리능력, 지기 관리 수행도 개선과 대상자별 맞춤형 사례관리를 위한 표준화된 행동 체크리스트 제작 보급 및 사례별 운동, 물리치료 지도 방법 계획 수립에 대한 인력 충원이 필요하다.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.277-281
• /
• 2017

Lately rainfall characteristics that it rains a lot in a short space of time often occurs. Because of this meteorological phenomena, the flow rate and concentration of initial rainfall for runoff and combined sewer overflows are changed. In the case of this inlet fluctuation, the flotation method at high surface loading rate is suitable for water quality management. the flotation method is able to meet the removal rate requirements of water public zone in 5 to 10 min which is irelatively short period. For assessment and diagonision of flotation method, A/S ratio is applied until now. But unfortunately, this has some limits for evaluation standard for certification and assessment of technical diagnosis and operation. This is why there is different efficiency in the bubble distribution at the same A/S ratio. The velocity and time of floating is changed by the different bubble distributions. The floating time affects the plant volume because the time factor make size dicision. Therefore the charateristics of bubble distribution and floating time at the same A/S ratio is necessary to apply to evaluation standard for certification and assessment of technical diagnosis and operation. For generalization of the method in certification and assessment, the characteristics of bubble distribution was studied. Until recently, using the optical device and shooting live video, there are some analysis technology of the floating factors. But this kind of technology is influenced by the equipment. with this level of confidence about the results, it is difficult to apply to generalize. According this reasons, this study should be applied on experiment generalization of method about measurement of relation between bubble distribution and floating time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.577-582
• /
• 2020

Electricity produced at power plants is distributed to consumers through several stages of substations. At this time, an ultra-high voltage transformer is needed in the initial transmission stage to transmit a voltage suitable for each consumer. A high voltage, non-uniform electric field is formed at the end of the winding of the ultra-high voltage transformer, which carries a risk of dielectric breakdown. The winding of the ultra-high voltage transformer is an electrode, which is the key to converting the magnitude of the voltage. A non-uniform electric field is formed along the shape of the winding end, resulting in high electrical stress. The static ring installed at the upper and lower ends of the winding is used to disperse the stress at the winding end. Several variables should be considered when designing a static ring. Among them, this study examined how the curvature of the static ring, the thickness of the insulating paper, the number of barriers, and barrier thickness affect the electrical stress of the static ring using the Finite Element Method. Suggestions to be considered when designing the static ring are proposed through the FEM results.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.865-875
• /
• 2018

Selection of optimum reaction conditions during deoxygenation process of palm oil is essential factor to obtain the maximum yield of bio-jet fuel. In this context, the deoxygenation of palm oil was carried out in a fixed bed reactor with an internal diameter of 1 inch loaded with a 1 wt.% $Pt/Al_2O_3$ catalyst. The composition of the organic liquid product(OLP), which can be utilized as a transportation fuel through the upgrading process, was analyzed by a gas chromatography method. The palm oil/hydrogen ratio and hydrogen pressure in the feed affected the decarboxylation(DCB) and hydrodeoxygenation(HDO) reactions, resulting in a change in the composition of the OLP. As the reaction temperature increased, the continuous cracking reaction of the deoxygenation product was promoted and the product composition in the $C_5{\sim}C_{14}$ region was increased. Thus, the results can help to understand the characteristics of deoxidation reaction of palm oil as well as the subsequent process, hydro-upgrading, to obtain the maximum yield of bio-jet fuel.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.129-137
• /
• 2009

While the broadband network and multimedia technologies have been developing, the commercial market of digital contents also has been widely spreading with recently starting IPTV. As the IPTV services are getting to be generalized and popularized, the contents protection and authentication system tends to draw more attentions. So we need a system that can protect contents and allow only authenticated person to use right service by controling user authority and using content encryption. Until now, the conventional protection and authentication system is taking advantages of merits both in CAS and DRM. But the weak point of this system are in high costs, complexity and using HW. For resolving these problems, in this paper, we proposed IPTV contents protection and authentication system using OTP. When we transmit the content encrypted by OTP key using contents delivery technology, we operate XOR with contents using another settop-box's OTP key which was transmitted from distribution server. And contents are reconstructed and transmitted to the settop-box, In the end, downloaded content are encrypted by OTP key and are superior in content protection when contents redistribution. Since OTP use double-authentication elements in encryption process, this method is excellent in content protection. And it is very effective in cost aspect because it could be implemented by SW program. Another benefit is that we can shorten the development time period. In this paper, we propose and find its possibility as a new content protection and authentication method suitable for IPTV services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.661-671
• /
• 2018

Domestic studies on steel plate concrete structures have focused on nuclear structures with high strength. In this study, the SC structure was applied to the general structure, and the SC structure that is advantageous in terms of safety and construction was limited to a special structure. As a basic study for applying SC, this paper proposes basic design information of a SC structure applying cement concrete to plan the structure, which is suitable for eco - friendliness by replacing concrete cement, an important factor in a SC structure, with blast furnace slag. This study examined the compression characteristics and the effective length factor under central compression load. To calculate the effective length factor, the Euler column theory was applied without applying plate theory. The effective length factor was calculated from the yield strength of the steel plate, buckling of the steel plate, and the point at which the concrete was broken. In addition, this study examined whether the maximum compressive strength meets the national and international reference equations with the slenderness ratio (B/t) as a parameter. By analyzing the buckling of the specimen by applying the column theory and selecting the strain of the measured steel plate, the effective length factor was analyzed and compared with the value presented in the reference equation.