• Proceedings of the KGS Conference
• /
• 2004.05a
• /
• pp.54-54
• /
• 2004

본 연구에서는 광주광역시 지하수의 수질 및 이용형태를 분석하고, 수질의 지화학적 조성을 통해 지하수의 유동기구를 추정하고자 한다. 그 결과를 기초로 지하수의 오염방지 및 지하수 이용에 대한 제반 관리방안을 제시하는데 연구의 목적이 있다. 화강암질 편마암은 광주지역의 기저가 되는 암석으로서 동남부의 일부지역에 부분적으로 분포하고 있으며, 북동부와 남서부의 축을 중심으로 넓게 분포한 화강암은 대부분 쥬라기때 관입한 조립질 흑운모화강암으로서 풍화에 약하여 300m이하의 낮은 능선을 이루고 있다. (중략)

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.414-417
• /
• 2003

유역의 경사가 비교적 급하고, 소규모 축산농가의 미처리된 축산폐수 및 농경지 배수, 산재된 마을하수 등 비점오염원의 유출이 강우시 집중적으로 이루어지는 중산간 농업용 저수지의 수질개선을 위한 공법으로 부영양화된 충남 아산 마산저수지의 유입부에 조성한 저류지를 이용한 수질개선효과 및 물질분해자로서 미생물학적 특성을 2000년부터 2002년까지 3년간 연구함으로서 향후 유사한 농업용저수지의 수질개선 방안으로 실용화 가능성을 모색하고자 하였다. 그 결과 수질정화효과는 총질소와 총인 등 영양염류의 정화효과가 비교적 우수하게 나타났으며, 유기오염물질로서 BOD, COD, SS 등은 평균 수질정화효과는 (-)의 값을 보여주었으나, 강우기에는 정화효율이 높게 나타났다 또한, 저류지의 물질 침전기능 외 오염물질의 활발한 분해작용을 살펴보고자 세균 분포 특성을 조사한 결과 유입수와 저류지, 저수지 각각의 수체에서 조사된 총세균수 및 총세균수에 대한 진정세균수의 비율이 유입수<저류지<유출수의 순으로 나타나 저류지의 유기물질 분해 활성이 높음을 보여주고 있다. 따라서 저수지 유입부에 조성한 저류지의 수질개선효과는 강우시 입자성 유기물질의 효과적 제거 뿐만아니라 영양염류의 제거효과, 특히 질소의 제거효과가 높은 정화기구로서 설치비용이 적고, 유지관리가 간단한 특성을 살려 유사한 중규모 농업용저수지의 수질개선 기법으로 널리 활용할 가치가 있음으로 사료된다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.2
• /
• pp.13-24
• /
• 1989

The geometrical characteristics of sculls which are in use for propulsion of Korean traditional row boats were briefly surveyed. A typical dimension of the scull was selected and prototype for test was prepared. Angular displacements and the force components at handle and pivoting point were measured when the scull was operated in moored condition by skilled fisherman. Time histories and trajectories of motion were analyzed with the force generated at the scull blade. It was found out that the thrust of the scull was generated mainly by reaction force. The direction of improvement for better rowing motion could be also suggested. Continued study on this topic in a self-propulsion condition will provide us another interesting informations and prepare a possibility of application in evaluating rowing motion of oar.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1579-1584
• /
• 2011

This paper discusses an energy system that can convert wave energy into electrical energy. This wave energy generation system is movable and has 12 arms and one generator. A multibody dynamic model for this system is established by using kinematic constraints. A gear mechanism, several kinematic constraints, and force elements are included in the model. Wave forces are obtained numerically from the time domain formulation based on the Morison equation. The MSC/ADAMS program is employed to carry out dynamic analysis of the wave energy generation system. The dynamic behavior responses of this system are analyzed for design verification. According to the results of the dynamic analysis, the yaw motion is relatively stable and kinetic energy sufficient to generate electrical energy is obtained when the wave height exceeds 1m.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.6
• /
• pp.33-39
• /
• 2007

The seismic source parameters of the Uljin earthquake on 29 May 2004, including focal depth, focal mechanism, magnitude, and moment tensor elements for source characteristics, are analysed using moment tensor seismic source inversion. The Green‘s function for 3 crust models representing the southern Korean Peninsula are used. Also 3 kinds of epicenters are used to find optimum solution for seismic source parameters. Results show that seismic source parameters have a little dependency of azimuthal distribution and epicentral distances of seismic stations. Final results show that the event, considering 6 moment tensor elements, is caused by the typical reverse fault with nearly NS strike. The focal mechanism implies that the tectonic force around epicenter area currently has compressive environment, with nearly EW principal axis. The focal depth is estimated to be about 12km. The resultant focal mechanism show fairly good agreement to those of other studies. However, focal depth is much different from that of other studies.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.5
• /
• pp.439-446
• /
• 2016

The characteristics of bearingless main rotor of helicopter are investigated through non-rotating tests and rotating tests. The stiffness and natural frequencies of rotor blades, flexbeam, and torque tube which are core components of baearingless rotor are measured to obtain input material properties for rotor analysis. The functional test on ground for assembly of one hub with damper, snubber, and no blade is carried out to check interfaces between components, kinematics of components, and pitch motion ranges under applied loads including centrifugal load. The 4-bladed bearingless rotor with 5.82m of rotor radius is tested on the whirl tower with rotation plane of 9.65m height. The thrust and power are measured to obtain hover performance and the frequencies and dampings of the rotor are obtained by excitation of cyclic pitch by hydraulic actuators.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.74-80
• /
• 2001

Purpose : Irradiation cones by using backscatter electrons are made for the treatment of superficial small lesions of skin, oral cavity, and rectum where a significant dose gradient and maximum surface dose is desired. Methods and Materials : Backscatter electrons are produced from the primary electron beams from the linear accelerators. The design consists of a cylindrical cone that has a thick circular plate of high atomic number medium (Pb or Cu) attached to the distal end, and the plate can be adjusted the reflected angle. Primary electrons strike the metal plate perpendicularly and produce backscatter electrons that reflect through the lateral hole for treatment. Using film and a parallel plate ion chamber, backscatter electron dose characteristics are measured. Results : The depth dose characteristic of the backscatter electron is very similar to that of the hard x-ray beam that is commonly used for the intracavitary and superficial lesions. The basckscatter electron energy is nearly constant and effectively about 1.5 MeV from the clinical megavoltage beams. The backscatter electron dose rate of $35\~85\;cGy/min$ could be achieved from modern accelerators without any modification. and the depth in water of $50\%$ depth dose from backscatter electron located at 6mm for $45^{\circ}$ angled lead scatter. The beam flatness is dependent on the slit size and the depth of treatment, but is satisfactory to treat small lesions. Conclusions : The measured data for backscatter electron energy, depth dose flatness dose rate and absolute dose indicates that the backscatter electrons are suitable for clinical use.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.12
• /
• pp.1152-1158
• /
• 2011

In this paper a configuration of the load evaluation device for the tilting actuator using hydraulic power is presented, which makes it possible to measure the force action on the tilting actuator. It is possible to measure only current using the conventional electro-mechanical actuator when the bogie is in the process of the tilting. This makes impossible to measure the force acting on the tilting actuator. In order to overcome this problem a kinetic mechanism test system using hydraulic cylinder is proposed. The system are consisted of hydraulic cylinder for the tilting actuation, control system to control hydraulic power, sensors to measure for force and displacement and monitoring system for the user interface.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.06a
• /
• pp.28-30
• /
• 1988

윤활시스템에서 마모는 상대적인 운동을 하는 두 물체사이에서 표면상태, 접촉조건 및 분위기등의 제요소들에 의해 발생되며, 형태학적으로 scuffing, scoring, pitting 및 fretting 등으로 분류된다. 윤활조건의 특성에 따라 미끄럼 접촉에서는 mild wear, severe wear로 구분되며, 이들의 마모 생성기구의 차이는 접촉상대속도, 하중 및 표면조도등의 정도에 기인된다. mild wear에서 severe wear 영역으로 전이될 때의 가혹한 조건에서 생성되는 마모현상을 scuffing wear라 하며, 이는 접촉면에서의 표면돌기의 직접접촉에 의한 cold welding 현상, 즉 local welds의 특성을 지닌 마멸형태로 정의한다. 이의 생성은 접점간의 하중 및 미끄럼 속도가 증가됨에 따라 온도상승에 기인되어 순간적으로 발생된 마찰열이 그 원인이 있으며, 기어, cam 및 tappet, 피스톤링 및 실린더 라이너 등의 마멸현상이 대표적인 예이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.601-610
• /
• 1986

The acoustic intensity in the very near field of a vibrating surface reveals information about the location of sound sources and sinks. A system model of tennis racket was developed from simultaneous measurement of excitation force, surface vibration and the near field sound pressure. The characteristics of structural dynamics were obtained by standard experimental modal analysis techniques while the sound radiation characteristics were determined by estimating the acoustic intensity. In this paper, the information about vibration behviour was obtained by acoustic intensity method and some, experiments for verification were carried out. Close correlation was found between experimentally determined acoustic intensity and vibration mode patterns of the tennis racket.