• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.1-38
• /
• 1979

The woody species of Genus Ilex which are endemic to Korea are distributed on limited area due to solely temperature factor. There is some differences according to species, however in general, the evergreen Ilex are found along southern coastal area of Korean Peninsula and near islands where the cold index does not exceed $-5^{\circ}C$. But Ilex macropoda and the variety, only deciduous ones, are grown in temperate zone of the peninsula and some islands. The list of Ilex species of Korea are as follows. Ilex cornuta Lindley et Pax., I. crenata Thunb. var. microphylla Max., I. crenata Thunb., I. rotunda Thunb., I. macropoda Miq., I. macropoda Miq. var. pseudo-macropoda Loensner, I. integra Thunb. The author surveyed the populations of Ilex species as many as possible and data of some characters such as leaf shape, spine, fruit shape, stomata density, sex ratio in natural communities, etc. are collected. Almost all the Ilex species in Korea show sporadic distribution. This means quite small sized populations isolate distantly each other eliminating the change of gene exchange in between. Particularly Ilex conuta and I. crenata show the morphological differentiation among populations as well as significant individual variation within a population. These were true with such characteristics, leaf shape, leaf dimension, leaf margin, fruit shape, spine, and stomata density. The founded are that the fruit length and the stomata density counted on the beneath surface of leaves of Ilex cornuta increased with the decrease of latitude. These are naturally closely related with the cold index values. The table shown below indicates the correlation between mean stomata density per $0.3642mm^2$ and cold index values. These relation however were not observed on Ilex crenata. The most dominated natured in relation to individual variation were outline of leaf, the number of marginal spine, the shape of leaf cross section and the degree of luster of the upper leaf surface. As shown in photos 5~7, these variations are agreed at a glance. There are reports that the development of marginal spines in some Ilex species is associated with the juvenility and topophysis. In present study, these two factors were neglected because of the intended sampling procedure. Of Ilex rotunda, population difference with the characteristics of leaf length is recognized but not for leaf width, petiole length, and fruit size. However, individual variations within a population were significantly large. In case of Ilex integra, only individual differences within population were calculated statistically for such characteristics as leaf length, leaf width, and petiole length. As to natural population, the sex ratio was 1:2 (female to male) for Ilex cornuta, and 1:1 for Ilex crenata. The tendency of more male than female in I. cornuta was agreed to other observations. Preparing the tip cutting of length 10cm, and treating with IBA, then attaching earth ball to the cut end, very successful rooting percentages were obtained. Asexual propagation has the advantages of maintaining the heterozygosity of existing varieties and overcoming the difficulties of delayed seed germination frequently encountered with Ilex species. Considering a great deal of variation in morphological traits, a good possibility of selection breeding for decorative and ornamental purposes exists. At present, these evergreen Ilex are ignored by local people as nuisance weedy shrubs. So the proper protection measures should promptly be taken.

• Korean Journal of Plant Taxonomy
• /
• v.36 no.3
• /
• pp.163-187
• /
• 2006

Taxonomic studies were conducted to evaluate the interspecific relationships in Viola albida var. albida and its related taxa using seven populations for morphology, palynology and anatomy. Molecular phylogenetic studies were also examined in 28 populations including 19 Korean, four Chinese, two Japanese, one American population and two outgroups using nrITS, and 27 populations except V pinnata for trnL-F region of chloroplast DNA. Morphological differences was observed among seven populations of three species in leaf shape, but characters such as serrate number of leaf margins, petal size, pistil shape were showed overlap between populations. Pollen shape of seven populations was monad and grain shape on the polar axis was semi-angular. Morphology of aperture was tri-colporate, and the surface sculpturing was scabrate in rugulate. The grain shape of equatorial view of five populations was prolate whereas V albida var. taknhashii type 1 and V albida var. chaerophylloides type 3 were subprolate. The anatomical characters of rnidvein of leaf, petiole, peduncle, root were also described for the species. The stomatal apparatus of the leaves was observed only in abaxial surface, and the number of stoma per unit ($mm^2$) were abundant in incised than lobate or cleft margin of the leaves. The nrITS analysis shows that V. pinnata and V. dissecta was monophyletic and occupied a basal position in the V. albida var. albida and its related taxa. The other clade including infraspecific populations of V. albida, and V. eizanensis was paraphyletic. The trnL-F noncoding region analysis was similar to the ITS tree. According to the above observations in morphology, palynology, anatomy, and molecular phylogenetic analysis, the significant differences were not found except for leaf shape in Viola albida var. albida and its related taxa, therefore V. albida var. takanhashii and V. albida var. chaerophylloides were considered to be an infraspecific taxa of V. albida var. albida rather than an independent species, subvariety or variety of V. pinnata and V. dissecta.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.266-275
• /
• 2009

To develop new high-quality Yakchobugak, features of Lactococcus lactis-fermented waxy rice paste after addition of some colored powdered agro-food products were investigated. Total and reducing sugars of waxy rice paste fermented by lactic acid bacteria were higher than those of control raw waxy rice paste. Total acidity gradually increased as powder concentration rose, being 1.02-1.56% and 0.96-1.87% in samples fermented with Cucurbita maxima and Capsicum annuum powders, respectively; these values were 3-4 times those in rice fermented with other powders. Fermented waxy rice paste viscosities were lower than those of non-fermented samples. The viscosities of samples fermented with Curcuma longa and Opuntia ficus powders were in the range $100-160{\times}10^4$ centipoise($mPa{\cdot}s$), and those of pastes fermented with Robus coreanus and Camellia sinensis extracts were under $40{\times}10^4mPa{\cdot}s$. Hunter color lightness(L) values decreased and yellowness(b) values rose after fermentation. Waxy rice paste fermented with Robus coreanus showed uniform particle size distribution, and many pores, by scanning electron micrography.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.431-440
• /
• 1993

This study was carried out to clarify a taxonomical relationships of the Korean Theaceae using characters from morphological, anatomical, electrophoretic and numerical methods. The results are summarized as follows ; Morphological data were cluster analysis by Euclidean distance, the complete and average linkage cluster were most distinctly classified into subfamily level. At the principal components analysis(PCA), the commutative contribution rate of three principal components showed to 91.1% total variance. By the leaf venation were classified semicraspedromous type of Theoideae and brochidodromous type of Ternstroemioideae. The stomatal types were classified Paracytic of Theoideae and Anomocytic type of Ternstroemioideae ; the former has founded subsideary cell the latter has not found. All taxa possessed common isozyme bands did not found out of Theaceae banding patterns. But, the activity of Theoideae were existed in below No.5(Rf. 4.0-4.4), in contrast to Ternstroemioideae were existed in more than No.7(Rf. 5.7-6.2). The cluster analysis of leaf characters and peroxidase isozymes were similarity between two methods.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.90-96
• /
• 1999

Foliar and physiological characteristics of Schisandraceae plants distributed in Korea were investigated to elucidate differences in growth and the variations of inter and intra species of the plants. For this study, three species of Schisandraceae plants were used; i) Schisandra chinensis, decidious broad-leaved tree, ii) S. nigra, decidious broad-leaved tree, including monoecious, male and female types, ii) Kadsura japonica, evergreen broad-leaved tree. There were no significant differences in leaf length and width among three species, but leaves of Schisandra sp. plants were shorter and wider relative to those of K. japonica. The length of petiole of Schisandra sp. plants was greater than that of K. japonica and the difference was evident between female type of S. chinensis and K. japonica as longer as two times. Schisandra sp. trees showed larger size of stomata, but fewer numbers of stomata, compared with K. japonica. Although substantial changes in leaf morphology were not found in the Schisandraceae plants grown in different environmental conditions, the foliar length of K. japonica was seemed to be increased with increasing an altitude. Chlorophyll contents were also variable in inter and intra species and in, general K. japonica showed higher levels of chlorophyll contents relative to Schisandra sp. plants. K. japonica also showed higher light compensation point(LCP), light saturation point(LSP) and $CO_2$ assimilation rates at LSP, compared with Schisandra sp. trees. However, Schisandra sp. trees showed lower respiration per photosynthesis rates at LSP. The finding suggested that Schisandra sp. trees were acclimated to the growth conditions of lower light intensity with more effective photosynthetic activity. This was also confirmed by the fact that Schisandra sp. plants grown in shading places of a forest demonstrated the elevated rates of net $CO_2$ assimilation under the conditions of low light intensity.

• Korean Journal of Plant Taxonomy
• /
• v.33 no.3
• /
• pp.227-253
• /
• 2003

Morphological characters of C. kobomugi, C. gibba, C. echinata. C. remotiuscula. C. maakii. C. curta, and C. loliacea of genus Carex were rexamined. The epidermal patterns of perigynium, achene and leaf were investigated using by a scanning electron microscope(SEM) and a light microscope(LM). Morphological characters. such as length and width of stem and leaf, sheath, bract, spike, scale, perigynium, beak of perigynium, length of spike peduncle, size, and frequency of stomatal complex of leaf, number of bract, shape of stem transection, scale and apex of scale, beak and base of perigynium, achene, epidermal cell and cell wall of perigynium, achene, leaf epidermal patterns (fundamental epidermal cell and cell wall, silica body, subsidiary cell), hair, papillae, prickle present/absent of perigynium and leaf were useful for the identification of observed seven taxa. Examined six taxa of section Macrocephalae, Gibbae, Stellulatae, Elongatae, Ovales, and Heleonates were distint from each other with respect of length and width stem, leaf, bract, perigynium, perigynium beak, lenght of spike peduncle, perigynium, and leaf. A key based on data was presented here.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.517-522
• /
• 2012

This study was conducted to investigate the morphological and anatomical characteristics of needle and the genetic diversity of Pinus pumila Regel which is a unique and the southern peripheral population in South Korea. ANOVA test showed that there were significant differences among individuals within population in all 8 needle characteristics. Average characteristics of 66 individuals were 53.59 mm in needle length, 0.78 mm in needle width, 68.98 in needle index, 0.65 mm in needle thickness, 4.56 ea. in maximum stomata row, 3.80 ea. in minimum stomata row, 8.36 ea. in total stomata row and 1.71 ea. in resin canals, respectively. Resin canal per needle of this species ranged from one to three, depending on external type. Especially, arrangement types were 69.47% in two resin canals and 30.45% in a single resin canal. A total of 78 bands was generated from 9 selected I-SSR primers. The estimates of genetic variation were 61.5% in proportion of polymorphic bands (P), 1.698 in effective number of alleles ($A_e$), 0.388 in expected heterozygosity ($H_e$) and 0.567 in Shannon's information index (S.I.), respectively.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.158-162
• /
• 2012

The acclimatization of in vitro propagated plants is an important step to produce vigorous plants for clonal forestry and in vitro micro-environment may affect the growth in ex vitro condition. To monitor in vitro environmental effects on the growth in ex vitro condition, several culture systems such semi-solid medium(SS), temporary immersion bioreactor(TIB) and continuous immersion bioreactor(CIB) culture types were tested to compare for the growth of acclimated plants of Liriodendron tulipifera. Results suggested that morphological characters, stomatal conductance, evapotranspiration and chlorophyll contents of acclimated plants were affected by the different of in vitro culture conditions. CIB type of culture was resulted to the lowest value in the biomass of acclimated plants. Net photosynthsis rate of CIB was the same level as those of SS and TIB. However, stomatal conductance, evapotranspiration and $CO_2$ partial pressure in the intercellular air space were lower than those of SS and TIB. The amounts of chlorophyll a, b and carotenoids were also lower than those of the other two culture systems. TIB, showing a little lower or higher value than SS in many growth character, is recommended rather than CIB to produce healthy yellow poplar plants in ex situ condition.

• Journal of Korea Foundry Society
• /
• v.41 no.3
• /
• pp.241-251
• /
• 2021

7000-series aluminum alloys are noted for their superior strength compared with other Al alloys, and their billets are generally fabricated by direct-chill (DC) casting. Surface defects in a DC-cast aluminum billet are mainly related to exudation and the meniscus freezing phenomenon, which are influenced by alloy compositions, casting speed, and casting temperature. 7000-series aluminum alloys have a wide freezing range during solidification, which makes it easy for casting defects to occur. In this study, we investigated surface defect evolution in casting billets of Al-8Zn-2Mg-2Cu alloy fabricated by a DC casting process. The billets showed "wavy" or "dotted" surfaces. The wavy surface was formed by meniscus freezing at a lower casting speed (200 mm/min) and temperature (655 ℃). In the wavy surface, refined dendritic cells were observed in a concave region due to the constitutional supercooling caused by meniscus freezing. Meanwhile, at a higher casting temperature (675 ℃), the dotted surface was formed by pore formation. In the dotted surfaces in the billet formed at a high casting speed (230 mm/min), an exudation layer was formed by the high metallostatic head pressure. The dotted region and the smooth region had a refined dendritic morphology and a columnar morphology at the exudation layer, respectively. This is attributed to the formation of gas pores in the dotted region.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.12-23
• /
• 2009

To verify hybridity of Asplenium castaneo-viride, external morphology, spore morphology, anatomy and chromosomes of the species and of the two presumed parental species, A. incisum and A. ruprechtii, were examined. A. castaneo-viride usually had 1-pinnately divided frond. However, some individuals had almost simple fronds with pinnatisect basal parts similar to A. ruprechtii, while others had fronds similar to A. incisum in having oblanceolate blades and basal pinnae with triangular, 2-3 lobed apices. On the surface of the spores, sculpturing consisted of folds that were usually prominent; forming long wings, and irregular or incomplete reticulation. However, reticulation patterns varied among species. A. castaneo-viride showed a wide range of variation from sparse to dense patterns, whereas A. incisum showed only from sparse to intermediate patterns. A. ruprechtii showed from intermediate to dense patterns. The spore size of A. castaneo-viride was $54.63{\mu}m$, larger than other two species ($47.81{\mu}m$ in A. incisum and $44.22{\mu}m$ in A. ruprechtii). The level of undulation of epidermal cell wall was also different. A. incisum had the most shallowly undulated wall, and A. castaneo-viride had a pattern intermediate between the two presumed parental species. This same patterns was recognized in the density of stomata. The density of $45.91/mm^2$ in A. castaneo-viride was intermediate between the two presumed parental species ($67.00/mm^2$ in A. incisum, and $37.86/mm^2$ in A. ruprechtii). Chromosome number was constant (2x =2n = 72) as in A. incisum and A. ruprechtii. However, A. castaneo-viride showed a different ploidy level. The populations of Mt. Mai (Jeonbuk province) and Mt. Duryun (Jeonnam province) were diploid (2n = 72) which is a new record for this taxon, whereas the population of Mt. Buram (Seoul) was tetraploid (2n = 144). Conclusively, A. castaneo-viride was revealed to be a hybrid of A. ruprechtii and A. incisum based on evidence involving leaves, spores, epidermal cells, stomata and chromosome number.