• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.131-134
• /
• 2014

PMSM(Permanent Magnet Synchronous Motor)은 가공기, 로봇, 공장 자동화 등 현재까지도 산업 시스템 전반에 널리 쓰이고 있으며, 그에 대한 연구도 활발히 진행되고 있다. 하지만 PMSM에 부하를 인가하거나 혹은 기계 몸체와의 결합 과정에서 기구부가 가지고 있는 고유진동 주파수에 의해 동력 전달 부분에 있어 기계계의 응답 특성은 불안정해지고, 떨림 현상이 발생된다. 본 논문에서는 PMSM을 이용한 회전 운동 시스템에서 출력되는 전류에 기구부가 가지고 있는 특정 영역의 고유진동 주파수를 제거한 전류를 적응 노치필터를 통해 내보낸다. 그 결과 기계부의 떨림 현상을 제거하고, 안정적인 제어 시스템을 제안한다. 이 제어알고리즘을 가상실험으로 필터 통과 전과 후의 결과를 비교 및 분석하도록 한다.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.446-451
• /
• 2000

In this paper, a new adaptive cross-coupling control (CCC) algorithm with an improved contour error model is proposed to maintain contouring precision in high-speed nonlinear contour machining. The proposed method utilizes variable controller gains based on the instantaneous curvature of a contour and the feedrate command. The proposed method is evaluated and compared with the conventional CCC for nonlinear contouring motion through computer simulations. The simulation results show that the proposed CCC improves the contouring accuracy more effectively than the existing method.

• 유체기계공업학회:학술대회논문집
• /
• 1997.02a
• /
• pp.58-73
• /
• 1997

본 연구는 항공기용 환경제어계통의 시스템관련 제반 기술 및 그 핵심요소인 ACM(Air Cycle Machine)시제기의 개발을 통하여 국내의 여런 항공기개발 사업과 관련하여 급속히 요구되고 있는 항공기의 sub-system을 국산화할 수 있는 기술축적을 목적으로 수행되었다. 본 연구에서는 항공기용 환경제어장치(Environmental Control System : ECS)를 개발대상으로 하여 그 핵심부품인 Air Cycle Machine의 시제품을 순수 국내 기술로 설계/제작하였고, 자체 개발한 성능시험기를 이용하여 성능시험을 수행하였으며 또한 ACM 성능을 검증하기 위하여 기존제품의 자료와 비교하였다. 향후 이 시스템의 상품화를 위해서는 구동축의 무윤활 베어링에 대한 연구가 병행되어 주유동의 오일오염을 국소화시키는 시스템보완이 요구된다. 항공기용 환경제어장치(ECS)의 시스템해석부터 ACM의 공력/구조설계, 제작, 시험등 일련의 개발과정을 통하여 시스템에 대한 해석능력이 향상되었고, 그 핵심요소인 ACM의 순수 국산화개발이 가능하다는 판단을 내릴 수 있었다. 또한, ACM을 구성하고 있는 원심압축기와 반경류형 터빈의 제작 및 시험법은 유사 시스템 및 일반 터보기계류의 국산화개발에 유용하게 이용될 것으로 기대된다.

• Korean Journal of Metals and Materials
• /
• v.48 no.9
• /
• pp.847-855
• /
• 2010

The grain size of a cross-section of $8{\mu}m$-thick copper film was determined by electron backscatter diffraction analysis. Grain size distribution histogram showed the presence of a large fraction of small-sized grains, and the mean grain size was significantly affected by handling of them. A cut-off grain size, below which all grains are ignored as noise and eliminated for the calculation of the mean value, should be three or four times as large as the step size. Due to the presence of small grains, the linear intercept method derived larger mean grain size, which depends less sensitively on the cut-off grain size than the equivalent circle diameter method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.4
• /
• pp.755-760
• /
• 2019

In this paper, we developed the multi-tool carving machine which integrates the existing hot-wire carving machine, hot-wire cutting machine and spindle so that the shape of complex structure can be produced easily and quickly. We have also developed software that solves the problem that G-Code applies only to a single tool, and controls the details of the machine's operations that can not be managed with existing 3D modeling tools.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.172-180
• /
• 2019

In this study, a ship motion control system design method is introduced for autonomous ships. Some related research results and technologies for autonomous ships have already been developed and applied to testing ships. Recently, the Norwegian Maritime Authority and the Coastal Administration have signed an agreement and started to test autonomous ships in the defined area. Considering recent technology trends and background, in this paper, the authors also try to develop autonomous ship control technologies. In the designed control system, an observer is introduced to estimate unmeasurable system states. Based on the servosystem with state estimator, ship motion control experiment is performed to evaluate control performance using a model ship in water basin.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.22-27
• /
• 2022

An integrated front steering system and front brake system (FSFB) is developed to improve the stability and controllability of an SUV. The FSFB simultaneously controls the additional steering angle and front brake pressure. An active front steering system (AFS) and an active front brake system (AFB) are designed for comparison. The results show that the FSFB enhances the lateral stability and controllability regardless of road and running conditions compared to the AFS and AFB. As a result, the yaw rate of the SUV tracks the reference yaw rate, and the side slip angle decreases. In addition, brake pressure control is more effective than steering angle control in improving the stability and steerability of the SUV on a slippery road. However, this deteriorates comfort on dry or wet asphalt.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.74-81
• /
• 1995

In this paper, a composite controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The LQG/LTR controller is used to achieve a design transfer toop. A bandpass feedback controller is adopted to eliminate the response due to the disturbance, which generally can not be measured, confined within an interested frequence range. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the composite control system is compared with that of an LQG/LTR control system.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.96-104
• /
• 1995

A study for a lathe to machine workpiece with noncircular cross-section is presented. The noncircular cutting is accomplished by controlling radial tool position synchronized with revolution angle of the spindle according to the desired cross-sectional shape. A learning control algorithm is suggested for the tool positioning. The learning law of the algorithm is based on pole-zero cancellation, which guarantees the control stability. The control performances are analyzed and simulated on a numerical computer that the effectiveness of the control algorithm is convinced. The algorithm is tested on a conventional NC-lathe which shows some successful results.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.128-138
• /
• 1996

Based on the virtual stiffness model, the stiffness of a grasped object is characterized. Differing from the previous investigations, the effect of grasp force on the stiffness of a grasp is formulated in terms of additional stiffness, which is called additional stiffness in this paper, and it is addressed how this term affects the stability of a grasp. In addition, a method of controlling the stiffness of a grasp is proposed and validated by experiments using a two-fingered robot hand.