• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.530-534
• /
• 2011

The synthesis of dimethyl carbonate by liquid phase oxidative carbonylation of methanol was studied under batch reaction system. Reaction factors such as effect on various metals, anion containing in copper catalyst, temperature, carbon monoxide and oxygen molar ratio and copper content were investigated. In particular $CuCl_2{\cdot}2H_2O$ showed the excellent of the methanol conversion 65.2%, DMC selectivity 96.6% reaction condition under 1.0 g, $150^{\circ}C$, MeOH/CO/$O_2$=0.2/0.215/0.05 (molar ratio). $CuCl_2$ led to corrosion of the reactor. Thus, a new catalyst system using supports was investigated to resolve these corrosion problem. Influence on various supports were examined and copper catalyst supported on zeolite Y showed the most excellent activity on the formation of dimethyl carbonate. The amount of Fe dissolved during the reaction using ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometer) was compared with catalysts, calcined Cu/zeolite Y showed the lower value below 5% than $CuCl_2-2H_2O$.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.352-360
• /
• 2016

The purpose of this study was to determine the electrochemical properties develop DSA electrode for sewage sludge solubilization. Using Ir as a main catalyst, the catalyst selected for the sewage sludge solubilization durability and proceeds to functional electrode suitable for sewage sludge electrolysis experiment were obtained the following results. Less mass reduction of the sintering temperature of the main catalyst, Ir coated electrodes, the endothermic reaction zone $300^{\circ}C$ to $500^{\circ}C$, which was selected from a range of experiments. The efficiency of the catalyst results came up to $350^{\circ}C$ best. Each Binder stars (Ta, Sn, W) in this experiment was the biggest catalyst efficiency at $350^{\circ}C$. Used as a binder, $TaCl_5$, $SnCl_4$, $WCl_6$ of the Ta and without affecting the other characteristics of the main catalyst than Sn, W. For the 50% $IrO_2$ electrode is 1.4 V (vs. Ag / AgCl) in a current of about $29mA/cm^2$ was caused to evaluate the effectiveness of the electrode.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.260-260
• /
• 2009

초박형 절연막은 현재 다양한 전자소자의 제작과 향상을 위하여 활용되고 있으며, 일반적인 화학 기상 증착 방법으로는 균일도를 확보하기 어려운 문제점을 가지고 있다. 본 논문에서는 디스플레이의 구동소자로 활용되는 박막 트랜지스터의 특성 향상과 비휘발성 메모리 소자의 터널링 박막에 응용하기 위하여 초박형 실리콘 옥시나이트라이드 박막의 증착과 이의 특성을 분석하였다. 실리콘 옥시나이트라이드 박막은 실리콘 산화막에 질소가 주입되어 있는 형태로 실리콘 산화막과 실리콘 계면상에 존재하는 질소는 터널링 전류와 결함 형성을 감소시키며, bulk 내에 존재하는 질소는 단일 실리콘 산화막에 비해 더 두꺼운 박막을 커패시턴스의 감소없이 이용할 수 있는 장점이 있다. 플라즈마 처리 기법을 이용하였을 경우에는 초박형의 균일한 박막을 얻을 수 있으며, 본 연구에서는 이산화질소 플라즈마를 이용하여 활성화된 질소 및 산소 라디칼들이 실리콘 계면을 개질하여 초박형 실리콘 옥시나이트라이드 박막을 형성활 수 있다. 플라즈마 처리 시간과 RF power의 변화에 따라 형성된 실리콘 옥시나이트라이드 박막의 두께 및 광학적 특성은 엘립소미터를 통하여 분석하였으며, 전기적인 특성은 금속-절연막-실리콘의 MIS 구조를 형성하여 커패시턴스-전압 곡선과 전류-전압 곡선을 사용하여 평가하였다. 이산화질소 플라즈마 처리 방법을 사용한 실리콘 옥시나이트라이드 박막을 log-log 스케일로 시간과 박막 두께의 함수로 전환해보면 선형적인 증가를 나타내며, 이는 초기적으로 증착률이 높고 시간이 지남에 따라 두께 증가가 포화상태에 도달함을 확인할 수 있다. 실리콘 옥시나이트라이드 박막은 초기적으로 산소의 함유량이 많은 형태의 박막으로 구성되며, 시간의 증가에 따라서 질소의 함유량이 증가하여 굴절률이 높고 더욱 치밀한 형태의 박막이 형성되었으며, 이는 시간의 증가에 따라 플라즈마 챔버 내에 존재하는 활성종들은 실리콘 박막의 개질을 통한 실리콘 옥시나이트라이드 박막의 두께 증가에 기여하기 보다는 형성된 박막의 내부적인 성분 변화에 기여하게 된다. 이산화질소 플라즈마 처리 시간의 변화에 따라 형성된 박막의 정기적인 특성의 경우, 2.3 nm 이상의 실리콘 옥시나이트라이드 박막을 가진 MIS 구조에서 accumulation과 inversion의 특성이 명확하게 나타남을 확인할 수 있다. 아산화질소 플라즈마 처리 시간이 짧은 실리콘 옥시나이트라이드 박막의 경우 전압의 변화에 따라 공핍영역에서의 기울기가 현저히 감소하며 이는 플라즈마에 의한 계면 손상으로 계면결합 전하량이 증가에 기인한 것으로 판단된다. 또한, 전류-전압 곡선을 활용하여 측정한 터널링 메카니즘은 2.3 nm 이하의 두께를 가진 실리콘 옥시나이트라이드 박막은 직접 터널링이 주도하며, 2.7 nm 이상의 두께를 가진 실리콘 옥시나이트라이드 박막은 F-N 터널링이 주도하고 있음을 확인할 수 있다. 즉, 2.5 nm 두께를 경계로 하여 실리콘 옥시나이트라이드 박막의 터널링 메카니즘이 변화함을 확인할 수 있다. 결론적으로 2.3 nm 이상의 두께를 가진 실리콘 옥시나이트라이드 박막에서 전기적인 안정성을 확보할수 있어 박막트랜지스터의 절연막으로 활용이 가능하며 2.5 nm 두께를 경계로 터널링 메커니즘이 변화하는 특성을 이용하여 비휘발성 메모리 소자 제작시 전하 주입 및 기억 유지 특성을 확보를 위한 실리콘 옥시나이트라이드 터널링 박막을 효과적으로 선택하여 활용할 수 있다.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.41-48
• /
• 2004

Cyclodextrin glucanotransferase (CGTase) of Bacillus sp. isolated from soil was purified and its enzymological characteristics were investigated. It was found that the production of CGTase reached to the maximum when the strain was cultured in the broth containing 0.1 % albumin, 2% $NH_4Cl$, 2% soluble starch and 0.2% $NH_2PO_4$ for 72 hrs at $37^{\circ}C$. The purity of CGTase was increased by 9.7 folds through purification procedures by the following column chromatography DEAE-cellulose ion exchange chromatography and Sephadex G-100, G-150 gel filtration and its specific activity was 528.0 unit/mg. The optimum pH and temperature for the CGTase activity were 8.0 and $80^{\circ}C$, respectively. The enzyme was stable in pH $8.0{\sim}11.0$ at $60{\sim}80^{\circ}C$. The activity of purified enzyme was inhibited by $Pb^{2+},\;Hg^{2+}$ and $Zn^{2+}$. When CGTase was treated with each 20.5 unit, 41 unit, 205 unit and 410 unit to investigate the transglucosylation to stevioside by purified cyclodextrin glucanotransferase, transglucosylation rate to stevioside was 74.9%, 75.7%, 68.7% and 57.9%. Brown effect was observed above the concentration amounting to 205 unit of our CGTase.

• Korean Journal of Microbiology
• /
• v.37 no.3
• /
• pp.197-203
• /
• 2001

An ubiquitous bacterium, Pseudomonar cepacia KH410 was isolated from fresh water plant root and identified. Adsorption of heavy metals of lead, cadmium and copper by this strain was investigated. Optimal conditions foradsorption was 1.0 dry g-biomass, at pH 4.0 and temperature of $40^{\circ}C$. Adsorption equilibrium reached max-imum after 120 min in 1000 mg/l metal solutions. The adsorption capacity (K) of lead was 5.6 times higher thancadmium and 4.0 times higher than that of copper. Adsorption of lead was applicable for Langmuir modelwhereas Freundlich model for cadmium and copper, respectively. Adsorption strength (1/n) of heavy metal ionswere in the order of lead>copper>cadmium. Uptake capacity of lead, cadmium and copper by dried cell was83.2,42.0,65.2 mg/g-biomass, respectively. Effective desorption was induced 0.1 M HCI for lead and 0.1 $HNO_3$ for cadmium and copper. Pretreatment to increase ion strength was the most effective with 0.1 M KOH.Uptake by immobilized cell was 77.8,58.5,71.2 mg/g-biomass for lead, cadmium and copper, respectively. Theimmobilized cell was more effective than ion exchange resin on removal of heavy metals in solution containinglight metals.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.446-452
• /
• 2008

This study was conducted to research the biosorption characteristics using algae, Spirulina platensis, for the removal of Pb and Cu ions in wastewater. Both of free algal cell and immobilized algae by Ca-alginate were used as bioadsorbent, and experiment was proceed in batch reactor for Pb and Cu ions removal, respectively. In the biosorption of Pb and Cu ions by free Spirulina platensis cell, the adsorption equilibrium reached within 20 minute. The higher adsorbed amount of Pb and Cu was shown as increasing of initial concentration of Pb and Cu, and pH of solution, respectively, and the optimum pH was 4.5$\sim$5.0. Under the conditions of initial concentration of Pb or Cu are 200 mg/L, the maximum amounts of Pb and Cu adsorbed to the unit weight of Spirulina platensis were 86.43 and 57.02 mg/g, respectively, and these values were 1.94 and 1.48 times higher than those of activated carbon under same conditions, respectively. The biosorption kinetics of Pb and Cu ions by free Spirulina platensis cell fitted very well to the Freundlich and Langmuir isotherm. The maximum amount of Pb or Cu adsorbed to the unit mass of adsorbent by the Langmuir isotherm($q_{max}$) represented as 95.24 and 62.50 mg/g, respectively. The FT-IR results of free Spirulina platensis biomass showed that biomass has different functional groups and these functional groups are able to react with metal ions in aqueous solution. In the biosorption of Pb and Cu ions by Ca-alginate immobilized algae Spirulina platensis, the adsorption equilibrium reached within 40 min. and observed a little diffusion limitation differed from the free algal cell adsorption.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.140-145
• /
• 1997

Carbon dioxide hydrogenation reaction was carried out over hybrid catalyst composed of $Cu/ZnO/ZrO_2$, and MFI zeolites such as HZSM-5, H-Ga-Silicate and H-Fe-Silicate. The hybrid catalyst composed of $Cu/ZnO/ZrO_2$, catalyst and HZSM-5 showed the highest yield and selectivity to $C_2{^+}$ hydrocarbon, which seemed to be due to the largest amount of Br nsted acid sites. Higher yield to $C_2{^+}$ hydrocarbon was obtained over HZSM-5 with lower $SiO_2/Al_2O_3$ ratio and also with longer ion exchange time, which showed larger amount of Br nsted acid sites, respectively. When a metal ion was exchanged into HZSM-5, the highest yield to $C_2{^+}$ hydrocarbon was obtained with descending order $Ga/HZSM-5{\simeq}HZSM-5>Zn/HZSM-5$, i.e., with the amount of $Br\ddot{o}nsted$ acid sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.270-276
• /
• 2020

3D printing is an additive manufacturing technology that can produce complex shapes in a single process for a range of materials, such as polymers, ceramics, and metals. Recent 3D printing technology has developed to a level that enables the mass-production through an improvement of the printing speed and the continuous development of applicable materials. In this study, 3D printing technology using a laser was applied to manufacture a heat exchanger for an air compressor in a railway vehicle. First, the optimal design of the heat exchanger was carried out by focusing on weight reduction and compactness as a shape suitable for 3D printing. Based on the design derived, heat exchanger prototypes were made of AlSi10Mg alloy material by applying the SLM technique. Moreover, the manufactured prototypes were attached to an existing air compressor, and the heat exchange performance of the compressed air was tested. The test results of the 3D printed prototypes showed a heat exchange performance of approximately 80% and 85% at low and high-pressure, respectively, compared to the existing heat exchanger. From the 𝓔-NTU method results with an external cooling air condition similar to that of the existing heat exchanger, the calculated heat transfer amount of 3D printed parts showed similar performance compared to the existing heat exchanger. As a result, the 3D printed heat exchanger is lightweight with good performance.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.11-18
• /
• 2017

An anti-aging compound ethyl (4-(2,3-dihydro-1H-indene-5-carboxyamido) benzoate) rapidly crystallizes in emulsion systems, and a flavonoid 3,5,7-trihydroxy-4'-methoxy-8-prenylflavone bearing a whitening function causes coloration of cosmetic compounds when mixed with metal oxides. In this study, an electrospray method was used to encapsulate water-insoluble bioactive compounds in polymeric microparticles. Poly (methyl methacrylate) and polycaprolactone were used to encapsulate ethyl (4-(2,3-dihydro-1H-indene-5-carboxyamido) benzoate) and 3,5,7-trihydroxy-4'-methoxy-8-prenylflavone, respectively. It was found that polymer concentration, the structure of electrospray nozzle, and compatibility between polymers and bioactive compounds were important factors in the preparation of the particles. Polycaprolactone particles encapsulating 3,5,7-trihydroxy-4'-methoxy-8-prenylflavone was effective in preventing coloration of a cosmetic compound when mixed with metal oxides.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.143-149
• /
• 2020

This study tried to observe the ability to inhibit vasocontriction in phloretin - the primary ingredient of apple tree leaves and the Manchurian apricot - through ROCK(Rho-associdated, coiled-coil containing protein kinase) inactivation in rat aortae. A piece of artery that was separated from Sprague-Dawley male rats and retained or damaged the endothelium was suspended in myograph tank with two metal rings, the lower ring fixed to the bottom of the tank, and the upper ring connected to the isotonic force transducer. Interestingly, phloretin inhibited fluoride- or phorbol ester-provoked contraction implying that additional pathways dissimilar from endothelial nitric oxide synthesis such as ROCK or MEK (mitogen activated protein kinase kinase) inactivation might be involved in the vasorelaxation. Therefore, this study provides that phloretin participates in the reduction of ROCK or MEK activity in smooth muscle in addition to the endothelial-dependent action of the endotheliuim in complete blood vessels, and consequently inhibits actin-myosin interaction in smooth muscle. Furthermore, phloretin inhibited thromboxane A2-induced contraction suggesting the mechanism including inhibition of ROCK and MEK.