• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.21-26
• /
• 2018

Thermoplastic starch (TPS) was prepared by mixing starch with glycerol as a plasticizer. The glycerol content ranged from 20 to 35 wt. % and TPS was prepared in a twin screw extruder. The shear viscosity, thermal and mechanical properties of the TPS were investigated. The viscosity of TPS exhibited typical shear thinning behavior: decreasing viscosity with increasing shear rate. The power index, n, increased with increasing glycerol content. This is because as the content of glycerol, a Newtonian fluid, increases, the viscosity behavior of the TPS becomes closer to that of a Newtonian fluid. The thermal behavior of TPS showed that starch and glycerol are miscible. In addition, when TPS was aged for more than one day at room temperature, TPS showed a partially miscible phase structure. The moisture absorbed into the TPS was assumed to change the phase behavior. The mechanical properties of TPS were found to be strongly dependent on the content of the plasticizer. Both the toughness and stiffness increased with increasing plasticizer content. DSC showed that this unusual result was due to the combined effect of humidity and the high amylose content in starch.

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.61-62
• /
• 1994

• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.505-514
• /
• 1993

Defined oligoglycerol monolaurate esters were synthesized by means of step by step synthesis methods, and monoglycerol monolaurate, diglycerol monolaurate, symmetrical triglycerol monolaurate and symmetrical tetraglycerol monolaurate were obtained in a rate of 85~95% yields. All the reacted products could be separated by means of column and thin layer chromatography, and the structure of products has been analyzed with IR, $^1H\;NMR$ spectra respectively.

• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.493-499
• /
• 2010

Steam reforming (SR) of glycerol, a main by-product of manufacturing process of bio-diesel, for the production of hydrogen was investigated over the Ni-based catalysts. The Ni-based catalysts were prepared by an impregnation method, and characterized by $N_2$ physisorption, CO chemisorption, XRD and TEM techniques. It was found that the Ni/${\gamma}-Al_2O_3$ catalyst showed higher conversion and catalytic stability for the carbon formation than the other catalysts in the steam reforming of glycerol under the tested conditions. The results suggest that the steam reforming of glycerol over modified Ni/${\gamma}-Al_2O_3$ catalyst minimized carbon formation can be applied in hydrogen station for fuel-cell powered vehicles and fuel processor for stationary and portable fuel cells.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.5-13
• /
• 2014

In this study, exfoliated vermiculite (EV) coated with glycerol was tested for its abiility to remove phosphorus in aqueous solution. The glycerol modified vermiculite (GS) was prepared with EV/glycerol ratio of 1/4 where glycerol contained 4 mol% $H_2SO_4$ and heated until designated temperature. GS heated at $380^{\circ}C$ showed that the specific surface area was $53.1m^2/g$ and mass loss due to oxidation of carbon was maximum from TGA analysis. Removal of phosphorus using GS heated at $380^{\circ}C$ was well explained by Langmuir isotherm model and maximum sorption capacity of 714.3 mg/kg is comparable or greater than those of other clay orignated sorbents for phosphorus.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.824-827
• /
• 1994

Sardine oil was vacuum-steam deodorized at $170^{\circ}C$ with acid (acetic and citric acid) and ethanol solution as steam sources. Glycerol was added to fish oil to remove volatile odorous constituents. The storage stability of deodorized fish oil was determined by totox value, secondary parameter obtained from peroxide and anisidine values. Both deodorization with acetic acid solution and addition of glycerol to the oil resulted in improved storage stability. The totox values of fish oil deodorized with water, glycerol+water and glycerol+acetic acid solution were 936, 611, and 443, respectively after 10 days at $30^{\circ}C$. The result showed that acetic acid seemed to destroy the odorous constituents and glycerol accelerated the removal of odorous constituents, such as amines in fish oil.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1443-1459
• /
• 2019

Polyglycerol fatty acid ester nonionic surfactants have been used for a long time in foods and have been suggested as an alternative to the safety problems of PEG based nonionic surfactants. The polyglycerol fatty acid ester surfactants are synthesized by combining a hydrophilic polyglycerin and a lipophilic fatty acid. The hydrophilic polyglycerin is polymerized using glycerin, glycidol, epichlorohydrin, etc. The main issues of the polyglycerol polymerization reaction are to increase the content of the polyglycerol in the form of linear rather than branched or cyclic forms and to narrow the distribution of the degree of polymerization. The method of binding a lipophilic fatty acid group to a hydrophilic polyglycerin includes chemical synthesis such as esterification reaction and enzyme synthesis using lipase enzyme. The main issues of polyglycerin fatty acid ester synthesis are to increase the yield and to control the degree of esterification while reducing side reactions.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.31-36
• /
• 2006

This study was conducted to improve the bond strength of plywood bonded with F/U molar ratio urea-formaldehyde (UF) resins modified with the selected FGMDI prepolymer contents for various purposes. The amount of FGMDI was mixed with liquid UF resin at 0 wt% (as control), 2 wt%, 5 wt%, 10 wt%, 25 wt%, and 50 wt% based on the resin solids. As results, in bonding strength, plywood with F/U molar ratio of 1.4 showed the highest value in Type 2 test and all molar ratio UF resins modified with over 25 wt% of the FGMDI showed more than $11kgf/cm^2$, which was satisfied the minimum requirement of KS standard, $7.5kgf/cm^2$, after Type1.5 testing. As F/U molar ratio was increased and the FGMDI addition in the UF resin was increased, average reduction rate of Type 1.5 bonding strength compared with Type 2 was significantly decreased.

• Korean journal of applied entomology
• /
• v.36 no.3
• /
• pp.249-255
• /
• 1997

The sublethal temperature (5$^{\circ}$C for 2hr) led the fifth instar larvae of beet armyworm, Spodoprern exigucr (Hiibner), to increase cold tolerance to subzero lethal temperatures ( 'rapid cold hardening' ). The strength of rapid cold hardening was, however, varied among different populations which showed different cold tolerance in response to cold temperatures. To analyse the physiological factors affecting the rapid cold hardening, hernolymph osmolalities. supercooling points, glycerol contents, and cold stress proteins were measured by treating the fifth instar larvae with the sublethal low temperatures. The treated larvae showed increase of hemolymph osmolalities and glycerol contents. Changes of the osmolalities were greater in cold-hardy strains than in cold-susceptible strains. The sublethal temperature also induced them to express the cold-stress proteins (I0 - 20kD) in the hemolymph. but did not to change supercooling points.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.12 no.1
• /
• pp.54-57
• /
• 2012

A 3-year-old boy was transferred to emergency room (ER) with lethargy and abdominal pain. Physical examination revealed drowsy mental status but neurologically intact. Basic evaluation in ER shows hypoglycemia (43 mg/dL), hyperglycerolemia, ketonemia and ketonuria. Initial urine organic acid was performed and the result showed severe hyperglyceroluria. Under suspicion of isolated GKD, GKD gene was obtained from his DNA from white blood cell in peripheral blood and sequencing was performed. Isolated glycerol kinase deficiency (GKD) is an X-linked inborn error of metabolism that is either symptomatic or asymptomatic. GKD is due to deletions of, or mutations within, the GK gene, and there is no genotype-phenotype correlation. Gene study that we performed showed normal at a well-known mutation site, but found 4-base insertion at 79 base pair away from the beginning of exon 11.