• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1138-1145
• /
• 2003

The Bluetooth wireless technology is the new short-range RF transmission standard for low-power, low-cost, short-range radio links between mobile devices and electric product. The technology can eliminate the confusion of cables, connectors and protocols confounding communications between devices. Mobile phones, pagers, laptops, PDAs, digital cameras and more, all now have a common structure for communicating across their product platforms. In this paper, we present the Bluetooth protocol stack and headset profiles for the communication between mobile phone and headset. And then, we construct application software which is embedded in the device that operates an application over the Bluetooth protocol stack Next we implement wireless headset using MSP430, not real time operating system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.15-20
• /
• 2019

Due to evolving IoT technologies, the various application services using clothing, sport equipment, and wearable devices equipped with extream small communication devices have been actively developed. On the other hands, since these serveices requires long distance communications, Long Distance wireless communication technology LPWAN Research has been proceeded due to limitation of the commuication distance of Wi-Fi and Zigbee which were considered as representative technologies for IoT. Iin this paper, we introduces LoRa technology in detail, which is a non-band network technology among LPWAN technologies, and investigates the use cases of domestic as well as international countries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.5
• /
• pp.328-336
• /
• 2013

One of the important processes in device-to-device communication is the discovery of proximate devices. In order to perform precise discovery of devices, the distance information among all the device pairs should be gathered by each device sending a discovery signal in turn and the other devices receiving the signal. However, periodic discovery signal transmission by every device might require too long discovery period or too large resource for discovery. Above all, some discovery information might be lost due to several practical reasons and it may take substantial amount of time to obtain all the necessary information. In this paper, we propose a proximate-device-discovery method using partial discovery information in order to reduce the resource for discovery and support the cases in which some discovery information can be lost. We also discuss discovery probabilities with partial discovery information.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.785-790
• /
• 2020

In addition to the Fourth Industrial Revolution, interest and research on medical information are actively being conducted. As the technologies using short-range low-power wireless communication are applied in connection with mobile devices, the utilization of them in medical institutions is gradually increasing, and the demand of customers who want to receive high-quality services using IT technology is increasing in the medical environment according to the development and change of technology. In addition, modern people who are familiar with smart equipment and consider the value of time is important do not waste their time through rapid service. In addition, as the recent epidemics including Coronavirus Disease 2019 (COVID-19) have become popular, interest in untapped (non-face-to-face) has increased, and social distance is needed as a preliminary measure against infectious diseases. For this reason, this study studied the untapped-based medical reception system to provide quick service to patients using short-range low-power wireless communication and to provide safer and more comfortable environment for medical staff and visitors.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.87-90
• /
• 2014

Recently, environment facilities are able to manage real-time data collection and record management through integrated broadband modem LAN switching technology. Therefore, it need more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed an integrated broadband modem LAN switching technology which can applicable to the environment facility. Also, we presented integrated broadband modem of design plan and communication system. And it received data inside of environment facility using the two communication methods(IEEE802.11x and IEEE802.15.4x). Then, our proposed integrated broadband modem LAN switching technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.11-18
• /
• 2024

This paper presents a procedure to optimize the design of 70GHz band array antenna for automotive short range radar sensor applications using Chebyshev polynomials. SRR(: Short Range Radar) systems require a wide angle width and low Side lobe level to detect targets within close proximity while ensuring a high Field of View(FoV). The optimized antenna operates in the 76 to 81GHz frequency range, and to reduce the antenna size, we arranged 12 patches in series, achieving an SLL of 10dB, angle with of 112.5o, gain of 15.4dB and an input return loss of less than -10dB at 78GHz. In this paper, we proceed with antenna design for SRR using Chebyshev polynomials, and present an optimal design for antenna structures to be used in MRR(: Medium-Range Radar) and LRR(: Long Range Radar) applications based on this paper

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1186-1197
• /
• 2000

In this paper, we investigated performance for 5.8GHz Dedicated Short Range Communication(DSRC) packet communication system which will be applied to domestic Intelligent Transportation System(ITS) services and analyzed modulation technique and interference cancellation method to improve performance in physical layer. We presented the most suitable DSRC uplink protocol to apply to multiple access protocol for DSRC system. Finally, we presented channel model to estimate performance between Roadside Unit(RSU) and Onborad Unit(OBE), and showed their validity through the result of numerical analysis.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.679-682
• /
• 2008

High interest for the wireless network is going on the research to apply the related technologies in one's real life. Among these wireless network technologies, local area wireless network, Binary CDMA(Code Division Multiple Access), is the method transferring the data by using RF band based on 2.4Ghz. Binary CDMA has longer transmission distance than Bluetooth. Also, it is of benefit to an inexpensive price because the circuit is simple as compared with being similar to the performance of the existing CDMA. Though Binary CDMA has these benefits, one problem is a frequency overlap, and anther problem is to generate the sections with the shorter distance. To solve these problems, We propose the clustering method that can cover wide area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2167-2173
• /
• 2013

Recently, people are paying huge attention to problems caused by indoor air pollution. Also, the need for the system that monitors environmental information for indoor and warns a danger is growing increasingly. In this regard, we designed and implemented environment monitoring system for indoor. In this paper, we describe the system with hardware elements and it's communication method. In order to transfer the data from environment sensors, we use short-range wireless communication in smart phone. The proposed system is possible to know the indoor environment information in installed sensor node. If the risk is found, For the proposed system, there is an advantage that may be appropriate evacuation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2174-2182
• /
• 2013

This paper analyzed the PHY technology of IEEE 802.15.7 which is a technology trend and international standard of the LED-based VLC communication system. Also, the study analyzed the complexity of the system as well as the reception performance in a visible light wireless channel environment by analyzing detailed technology of PHY I mode and designing the RS code and block interleaver. According to the result, concerning PHY I which is operated in a single mode, it was confirmed that the complexity in designing the system was higher compared with an environment of the transmission of a short massage. Also it was confirmed that in a multi-path visible light channel environment, the reception SNR=1.5dB was required additionally.