• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.1027-1031
• /
• 2006

Recently, mobile-type analysis system when emergency patient can check his blood condition in the transportation or vessel has being required. Under the present system, it takes lots off-time to know the blood analysis result of patient, so, it may lead to a dangerous situation. But, in this study, analysis time makes to fall down to $1{\sim}min$. to emergency treatment patient more quickly, and you can check the information by wireless PC through Bluetooth base. It is able to measure in about 7minutes from 25minutes of warming-up time in existing facilities by testing temperature peculiarity curve, to operate system without error even minute temperature change by adoption DUAL heating. And Bluetooth base was adopted to reduce power consumption and be able to hospital networking by keeping and sending analyzed data when it needs.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.281-287
• /
• 2007

The Bluetooth technology represents an attractive approach to enable short distance wireless connectivity. The Bluetooth standard operates at the 2.4 GHz ISM band and offers the advantage of establishing ad hoc networks, called piconet and scatternet. The spread of Bluetooth implementation in consumer products opens up a new short range wireless networking applications. Bluetooth MAC avoids packet collision within a piconet by simple time multiplexing. But lack of synchronization among independent neighboring piconets introduces packet overlapping within a time slot. In this paper, the wireless network throughput of Bluetooth packet transmission system applying the pure-ALOHA and slotted-ALOHA MAC is investigated according to the impact of channel environment. From the obtained results, the throughput of the Bluetooth MAC protocol shown to offer good performance in wireless channel, and the results are useful for the implementation of Bluetooth networks.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.87-90
• /
• 2014

Recently, environment facilities are able to manage real-time data collection and record management through integrated broadband modem LAN switching technology. Therefore, it need more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed an integrated broadband modem LAN switching technology which can applicable to the environment facility. Also, we presented integrated broadband modem of design plan and communication system. And it received data inside of environment facility using the two communication methods(IEEE802.11x and IEEE802.15.4x). Then, our proposed integrated broadband modem LAN switching technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.231-238
• /
• 2022

In this paper, among short-range wireless communication technologies such as Beacon, Bluetooth, UWB (Ultra-wideband), ZigBee, NFC (Near Field Communication), Z-Wave, 6LoWPAN (IPv6 over Low power WPAN), D2D (Device to Device), etc., proposed an IoT service platform based on a beacon that can provide indoor positioning. And, a beacon-linked web server was designed by blocking indiscriminate beacon spam signals and applying REST web service technology with flexibility and scalability. Data accessibility between different devices was verified by testing the success rate of data transmission, the success rate of blocking beacon push, the success rate of IoT interlocking processing, the accuracy of location positioning, and the success rate of REST web service-based data processing. Through the designed IoT service platform, various proposals and research on short-distance-based business models and service platforms will be conducted in the future.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.1-9
• /
• 1999

In this paper, the performance of HIPERLAN(HIgh PErformance Radio Local Area Networks) CAC(Channel Access Control) of ETSI(European Telecommunication StandaTds Institute) in Europe, as High speed wireless LAN, is analyzed and estimated by mathematical approaches. The CAC protocol of HIPERLAN is the EY-NPMA(Elimination Yield-Nonpreemptive Priority Multiple Access) which is transmitted after prioritization, elimination and yield phase. We analyzed channel contention phase composed of elimination and yield phase and then throughput is inspected by simulation. This result is useful to design and implement of HIPERLAN protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.516-521
• /
• 2005

The application of UWB not only complies with the requirements of remote sensors system(ECG), it also contributes to the effectiveness of the implementations through its unique qualities such as ultra low transmission power - an important factor when dealing with biomedical equipment. In this paper, the aim is to replace the wired ECG sensors with a wireless link and design wireless UWB communication system. The various pulse shapes are presented that satisfies the FCC spectral mask and FCC part 15 rule. It is shown that UWB can be a high rate transmission over short ranges using Rake receiver, with the capability for reliably transmitting 100Mbps over distance at about 10 meters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.801-805
• /
• 2009

The importance of high-speed networking is ever increasing to better support multimedia application such as video conferencing. It is crucial to synchronize the network so that the delay between computers on the network is minimized. In high-speed LAN, for example, most computers use clocks with almost same frequency to minimize the delay for data transmission. However, because of the deviation of transmitter's and receiver's clock frequency and phase difference there can be a metastability problem. Elasticity buffer is to provide a solution for this situation and this paper presents an implementation is a high-speed elasticity buffer.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.17-20
• /
• 2001

In this paper, we realized a transceiver system for short distance communication with a commercial RF module working in ISM band. Also we measured system performance by transmitting baseband data in a building and then we compared the demodulated data bits with stored data bits in a PC connected with demodulator. The RF module In the experiments works only in the bandwidth of 424MHz-429MHz. The signal level degrades as the distance between transmitter and receiver increases. We measured the signal level and bit error and present the measured results with various locations in the building. And it is concluded that the measured data may be used in the design of short distance network in a building.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.287-290
• /
• 2010

최근 기기간의 접속에 적합한 근거리 무선 접속기술의 요구가 증대됨에 따라, 그 요구에 대응하는 무선통신기술의 하나로 UWB(Ultra Wide Band)가 주목을 받고 있다. 특히, TV와 캠코더, 카메라 등의 AV기기 상호 간의 무선접속을 포함하여 PC나 휴대정보단말(PDA) 등이 네트워크에 무선으로 접속하는데 UWB 기술은 주요한 역할을 담당할 것으로 예상된다. 최근 서비스가 진행되고 있는 HDTV를 비롯하여 향후 UHDTV(Ultra-HDTV) 등의 방송시스템이 본격화되면 HD급 이상의 캠코더는 고해상도에 따른 대용량 데이터를 저장하고 AV기기 간의 데이터 전송을 위해 고속 무선 데이터 전송이 필수적이다. 또한 이와 같은 고속 무선데이터 전송을 위해서는 보다 안정된 송수신 기술이 절대적으로 필요하다. 이를 위하여 본 논문에서는 차세대 UWB의 설계 제약조건 중 하나인 저전력 송신환경에서 수신 신뢰도의 향상을 이루기 위해 LDPC code를 오류정정부호로 고려하고, 제한된 반복복호 횟수를 가지고 개선된 성능을 얻기 위해 새로운 복호 알고리즘을 제안하였다. 또한, 제안한 복호 알고리즘에 대해 모의실험을 통하여 성능을 검증함으로써 차세대 UWB 송수신 기술로서의 유용성과 적용 가능성을 제시하였다.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.579-585
• /
• 2020

In this study, we used byte-inversion transmission method to prevent the flicker of lighting source in a visible light data communication link. In the transmitter, the non-return-to-zero (NRZ) signal with 9.6 kbps was on-off keying (OOK) modulated with a 100 kHz square wave carrier and byte-inversion signal was added after each byte to make the average optical power of the light-emitting diode (LED) constant. In the receiver, we used a band-pass filter to eliminate the interference of the 120 Hz noise which was induced from the adjacent light lamps, and an OOK demodulator to recover the original NRZ signal This scheme is useful in constructing wireless data networks using the illumination of visible light lamps.