• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.510-513
• /
• 2018

Recently, EMC (electromagnetic compatibility) becomes very important, which demands the measurement of EMI (electromagnetic interference) in the chip level. NFS (near-field scanning) systems defined in IEC 61967 and IEC 62508 are typical methods to analyze EMI in the chip level. As chips becomes faster, frequency measurement of NFS system should become wideband, but it degrades SNR (singal-to-noise ratio) of the NFP (near-field probe). This paper surveys SNR enhancement technologies of the NFS while maintaining wideband characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.801-808
• /
• 2004

In this paper, we proposed the grating parallel plate waveguide structure for converting a linearly polarized wave to a circularly polarized wave. For the design of the polarizer, the moment method and Floquet's theorem are applied under two assumptions that the incident wave is a plane wave and the structure is infinitely periodic. In order for the more precise design, we performed the near-field analysis for the finite polarizer structure using MATLAB. By comparing with the measured results obtained by the near-field arrangement, we verified the correctness of our near-field analysis. By taking the ideal assumptions considered in the initial design procedure into account, newly designed modified dimensions for the polarizer was suggested which give improved performance.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.2
• /
• pp.5-17
• /
• 2007

Various field setup and filtering criteria have been suggested to avoid the near field effects in surface wave methods. Unlike other surface wave methods HWAW method uses the near field component positively. It is possible by using maximum energy point based on time-frequency map and inversion method to consider receiver locations from the source point and body wave component. To verify the HWAW method in the near field numerical study was performed and the wave propagation in the stratified soil media was simulated due to a surface point load. All of five representative soil models were used. The experimental dispersion curves, determined by HWAW method at the various receiver distances in the region of near field, all coincided well with the theoretical dispersion curves determined by 3D forward modeling (Kausel's method). Consequently, it was considered that the HWAW method can provide reliable $V_s$ profiles effectively in the near field.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.174-182
• /
• 2009

In this paper, we propose a novel hybrid reader antenna using a triangular and rectangular sub-patch for near- and far-field RFID reader in UHF band. The antenna operates at 912 MHz, and the low-cost mass-production is available, since the antenna can be built by printing on a FR-4 substrate. The triangular patch is designed to produce a circularly polarized radiation along the bore-sight direction and the rectangular sub-patch is designed to generate a strong magnetic field over the antenna aperture. The measurement shows Hz field greater than -25 dBA/m(3 cm above the antenna aperture), and exhibits circularly polarized radiation(AR<3 dB) with a radiation gain of 6 dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.316-323
• /
• 2013

This paper deals with the near-field to far-field calculation for far-field characteristics of antenna and electromagnetic compatibility(EMC) testing. Since the conventional EMC testing process is inefficient such as measurements of the wide band signals and mega structures, Stratton-Chu formula is used to predict the far-field emission by simple and direct process. The usefulness of Stratton-Chu formula is verified by comparing to the analytic solution of the uniform distribution aperture in free-space. In order to inspect the far-fields and to get the near-field values, full-wave simulation solver is utilized. Through the full-wave simulation about the patch antenna, calculated far-field results from Stratton-Chu formula are proven. The predicted magnitudes of the far-field are in error by less than 6 %.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.76-82
• /
• 2016

In this paper, we evaluated shielding effectiveness (SE) of carbon nanotube (CNT) film using near field scanning (NFS) in near field analysis. We adopted CNT film with deposit carbon density of 5% and thickness of 1mm for evaluation of shielding characteristic. Using a test coupon analogized to an actual IC package, we measured SE according to measuring position and SE according to distances between the CNT film and the test coupon. As a result, the measured SE in the near field varied with frequency. Especially, the measured electric field SE in the center of the test coupon is better than that of the measured edge point of the test coupon where it is affected by fringing effect. The results show that the measured SE in the near field is affected not only by frequency but also by measurement environment such as position and height of the probe and height of shielding film. In conclusion, we should choose proper methods for SE measurement considering interference distance in the electronic control system because there is little correlation between the proposed evaluation method in the near field and ASTM D 4935-10.

• Journal of computational fluids engineering
• /
• v.2 no.1
• /
• pp.29-36
• /
• 1997

자유흐름장에 놓여 있는 회전 와류쌍을 음원으로 갖는 비정상 유동장에서 사극음원이 음장에 미치는 효과를 알아보기 위해 이차원 음장 수치해석을 시도하였다. 비압축성 유동장에 대한 비정상 수력정보를 기반으로 오일러식에서 교란 압축성 소음항을 도출하였다. 원거리 자유 경계면은 비반사 경계조건을 이용하여 매우 안정된 해를 얻을 수 있었다. 계산된 결과들은 MAE 방법과 비교하여 정확도를 입증하였다. 본 연구를 통해 비압축성 압력교란을 원천항으로 하여 물체가 존재하지 않는 경우에도 사극음원에 의한 음장을 수치적으로 계산이 가능함을 입증하였다.

• Journal of computational fluids engineering
• /
• v.2 no.1
• /
• pp.37-45
• /
• 1997

벽면 근처에 가까이 위치하는 회전와류쌍을 음원으로 갖는 비정상 유동장에서 벽면이 음장에 미치는 효과를 알아보기 위해 이차원 음장 수치해석을 시도하였다. 비압축성 유동장에 대한 비정상 수력정보를 기반으로 오일러식에서 교란 압축성 소음항을 도출하였다. 원거리 자유 경계면은 비반사 경계조건을 이용하였으며, 벽면에서는 벽면 효과를 음향장에 고려하였다. 자유흐름장에 놓인 와류쌍이 대칭인 나선팔을 갖는 반면에, 벽면이 있는 경우엔 음파가 전달되는 경로를 따라 방향성이 존재함을 알 수 있었다. 본 연구를 통하여 벽면이 존재하는 경우에 비정상 수력정보를 이용하여 근거리와 원거리 음장을 동시에 수행할 수 있음을 알아내었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.473-479
• /
• 2004

In this paper, power density in near field is calculated about analytic object which has comparatively large volume in considering used wavelength such as cellular base station antenna. Panel sector antenna which is used widespreadly in domestic cellular wireless communication system is modeled and electromagnetic field distribution in reactive near field region is calculated by FDTD (Finite Difference Time Domain) method. After that, antenna gain in far field region is obtain by near to far transformation. Power spectral density in radiated near field is calculated in applying to gain-based model with antenna gain in far field. Finally, compliance distance is obtained in considering the result from radiated near field calculation and basic restrictions on occupational and general public exposure limits in ICNIRP guideline. In the center of main radiating position, the result from gain-based model is -14.55 ㏈m and the result from surface scanning method is -15.75 ㏈m. When the losses from cables and connectors used in measurement are considered, the results from gain-based model and surface scanning method are nearly coincident.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.175-180
• /
• 2002

Loading/Unloading(L/UL) mechanism has been considered to be an alternative to contact start-stop(CSS) mechanism which eliminates stiction and wear associated with frequent start and stop process. It has other advantages including increased areal density due to lower flying height, reduced power consumption, and improved shock resistance. In order for L/UL to be Implemented in Near-field recording system properly, dynamics of optical flying head must be understood and optimized. In this paper the dynamic characteristics during loading process is analyzed numerically to investigate the effect of design parameters such as loading speed. slider shape, and initia conditions on the dynamic reponses of flying head..