• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.50-53
• /
• 1988

This paper presents an approach to the position control of a robot manipulator by using a self-tuning pole-placement controller with an inverse model. The linearized independent difference equations of manipulator motion are obtained, and the parameters of these models are estimated on line. The controller is composed of two parts, the primary controller obtains desired torques by using an inverse model and the secondary controller computes variational torques on the basis of induced perturbation equations by minimizing a quadratic criterion with a closed-loop pole-placement. Simulation is performed to demonstrate the effectiveness of this approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.90-94
• /
• 1986

This paper describes expansion of the state space pole assignment self-tuning control of SISO systems with system noise and abservation noise to that of MIMO systems. Resursive Prediction Error method is used for both parameter and state estimation in the block controllable canonical form. This simplifies the state feedback law by eliminating the online computation of transformation matrix.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.20-27
• /
• 2020

In general, a nonlinear system is linearized in the form of a multiplication of the 1st and 2nd order system. This paper reports a design method of a weighting matrix and control law of LQ control to move the double poles that have a Jordan block to a pair of complex conjugate poles. This method has the advantages of pole placement and the guarantee of stability, but this method cannot position the poles correctly, and the matrix is chosen using a trial and error method. Therefore, a relation function (𝜌, 𝜃) between the poles and the matrix was derived under the condition that the poles are the roots of the characteristic equation of the Hamiltonian system. In addition, the Pole's Moving-range was obtained under the condition that the state weighting matrix becomes a positive semi-definite matrix. This paper presents examples of how the matrix and control law is calculated.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.1
• /
• pp.1-10
• /
• 2000

본 논문에서는 무정전전원장치(UPS)에 사용되는 3상 PWM 인버터의 정전압 제어특성 향상을 위해 개선된 형태의 데드비트 제어방식을 제안하고 이의 설계를 수행한다. 일반적으로 UPS는 전압제어 루프 안에 전류제어기를 두는 형태의 이중 제어 루프 구조를 가지며, 빠른 과도응답 제어 특성을 얻기 위해 데드비트 제어기가 많이 적용되어 왔다. 그러나 전압, 전류의 이중 제어구조를 갖는 데드비트 제어기의 경우 동일한 극배치 특성으로 인해 기존의 제어 시스템은 불안정한 측면을 갖게된다. 이러한 제어특성의 개선을 위하여 분리된 극배치를 가지는 제어기구조를 제안하며, 이는 전압제어기 출력으로 1차 지수함수 응답을 사용하는 변형된 형태의 데드비트 제어기로 구성된다. 아울러 부하 변동에 따른 부하전류의 외란성분을 전향보상하기 위하여 전차원 외란 관측기를 설계하고 시뮬레이션 및 실험을 통하여 제안된 시스템의 우수성을 확인한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1212-1219
• /
• 2009

In this paper, a state feedback gain controller using linear matrix inequality(LMI) for the multi-objective synthesis is designed, in the multi-layer structure with integral type servo system. The design objectives include $H_{\infty}$ performance, asymptotic disturbance rejection, time-domain constraints, on the closed-loop pole location. The results of computer simulation show the validity of the designed controller.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.407-412
• /
• 1990

This note presents a novel algorithm for a continuous-time direct adaptive pole placement control for single-input single-out nonminimum phase systems. Although the resulting overall closed-loop system is locally stable, assumptions about parameter convergence or the nature of the external input are not considered.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.383-387
• /
• 1989

In this paper, an adaptive algorithm for processes with unmeasured deterministic disturbances is presented. This algorithm is simple to synthesize an adaptive controller with desired pole/zero assignment. The internal stability requirement is achieved so that this algorithm can easily handle any minimum or non-minimum phase system. Some simulations are given to show the applicability of this approach.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.355-359
• /
• 1989

An inverted pendulum is made practically and controlled by optimal controller and pole placement controller. An IBM PC/XT plays a part of the controller. The control algorithm is implemented with C language. An integrator is added to the controller to solve the high frequency problem. Experiment is performed according to the results of simulation.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.51-54
• /
• 1990

A parametrization for a linear system is presented to design a direct model reference adaptive pole placement controler. This parametrized model is one of the structured nonminimal models. The exponentially weighted least-squres algorithm is employed to estimate the control parameters. The direct adaptive controller has the exponential weighting properties by the proposed method of selecting the characteristic polynomials of the sensitivity function filters in connection with the reference models.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.9
• /
• pp.1046-1050
• /
• 1988

A direct adaptive control algorithm for discrete-time SISO systems with arbitrary zeros is presented in a general way by making use of reference model. A linear equation error model is formulated for estimating both the controller parameters and the auxiliary parameters. With this algorithm, asyptotic tracking within an arbitrarily small error can be achieved.