• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.412-419
• /
• 2023

Anion exchange membrane electrolysis is considered a promising next-generation hydrogen production technology that can produce low-cost, clean hydrogen. However, anion exchange membrane electrolysis technology is in its early stages of development and requires intensive research on electrodes, which are a key component of the catalyst-system interface. In this study, we optimized the pressure conditions of the hot-pressing process to manufacture cobalt oxide electrodes for the development of a high uniformity and high adhesion electrode production process for the oxygen evolution reaction. As the pressure increased, the reduction of pores within the electrode and increased densification of catalytic particles led to the formation of a uniform electrode surface. The cobalt oxide electrode optimized for pressure conditions exhibited improved catalytic activity and durability. The optimized electrode was used as the anode in an AEMWE single cell, exhibiting a current density of 1.53 A cm^-2 at a cell voltage of 1.85 V. In a durability test conducted for 100 h at a constant current density of 500 mA cm^-2, it demonstrated excellent durability with a low degradation rate of 15.9 mV kh^-1, maintaining 99% of its initial performance.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.4
• /
• pp.243-249
• /
• 2023

Urea oxidation reaction (UOR) via electrochemical oxidation process can replace oxygen evolution reaction (OER) for green hydrogen production since UOR has lower thermodynamic potential (0.37 V_RHE) than that of OER (1.23 V_RHE). However, in the case of UOR, 6 electrons are required for the entire UOR. For this reason, the reaction rate is slower than OER, which requires 4 electrons. In addition, it is an important challenge to develop catalysts in which both oxidation reactions (UOR and OER) are active since the active sites of OER and UOR are opposite to each other. We prove that among the NiFe₂O₄ nanoparticles synthesized by the hydrothermal method at various synthesis temperatures, NiFe₂O₄ nanoparticle with properly controlled particle size and crystallinity can actively operate OER and UOR at the same time.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.3
• /
• pp.180-186
• /
• 2022

The production of hydrogen via water electrolysis (i.e., green hydrogen) using renewable energy is key to the development of a sustainable society. However, most current electrocatalysts are based on expensive precious metals and require the use of highly purified water in the electrolyte. We demonstrated the preparation of a non-precious metal catalyst based on CuCo₂O₄ (CCO) via simple electrodeposition. Further, an optimization process for electrodeposition potential, solution concentration and electrodeposition method was develop for a catalyst-substrate integrated electrode, which indicated the highly electrocatalytic performance of the material in electrochemical tests and when applied to an anion exchange membrane water electrolyzer.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.3
• /
• pp.237-242
• /
• 2019

In the hydrogen refueling station (HRS), it is need the pre-cooling system (PCS) to limit the inside temperature ($85^{\circ}C$) of the onboard thank (700 bar) and to charge the hydrogen at short time (within 3 minutes) to fuel cell electric vehicle (FCEV). From those safety reasons, the temperature of hydrogen gas must be controled $-33^{\circ}C$ to $-40^{\circ}C$ in PCS. The cooling test of the gaseous ($N_2$, He, $H_2$) was carried out using heat exchanger (pre-cooler) by indirect cooling and direct cooling method. It was confirmed that the temperature of hydrogen gas had below $-40^{\circ}C$ at below $-75^{\circ}C$ of chiller temperature in direct cooling.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.1-13
• /
• 2024

Hydrogen is emerging as an essential material for carbon neutrality. In particular, Korea needs 22.9 million tons of imported clean hydrogen by 2050 to achieve carbon neutrality. However, a large amount of carbon is emitted during the import process, and market regulations are being discussed. This research estimates the carbon emissions of importing green hydrogen from Vietnam, Australia, and the United Arab Emirates to Korea, and calculates imported green hydrogen prices under carbon emission market regulations.

• Bulletin of the Korea Photovoltaic Society
• /
• v.7 no.2
• /
• pp.22-28
• /
• 2021

최근 잇따라 발생하고 있는 이상 기후로 탄소 중립에 대한 관심이 높아지고 있다. 우리나라 정부도 신재생에너지 중심의 에너지 전환과 수소 경제 활성화에 대한 정책을 연일 발표하면서 많은 국책 과제들이 추진되고 있다. 잉여 재생에너지를 수소 가스로 변환하여 저장했다가 필요할 때 다시 전기로 사용하거나, 수소 가스 자체를 타 산업에 활용할 수 있게 해주는 핵심 기술이 수전해 기술이다. 다양한 수전해 기술 중에 PEM 수전해 기술은 재생에너지의 빠른 변동에 신속하게 대응할 수 있어 재생에너지 확산과 더불어 최근 높은 관심을 받고 있는 기술이다. 그러나 비싼 촉매와 내부식성이 필요한 핵심 부품들이 국산화 되어 있지 않아 장치의 가격이 높은 상황이다. 그에 따라 아직은 수전해를 통해 생산된 수소 단가가 다른 기술을 통해 생산된 수소들 보다 가격이 높아 상업화가 더디게 진행되고 있다. 그러나 정밀 가공, 열처리, 코팅 등의 뿌리 기술들을 이용하면 PEM 수전해기의 핵심 부품인 bipolar plate나 end plate, 분리판 등을 국산화 하여 수소 생산 단가를 낮출 수 있는 여지는 충분하다. 탄소 중립에 반드시 필요한 그린 수소가 가격 경쟁력을 확보할 수 있도록 산업간 기술 협력이 절실한 시점이다.

• Bulletin of the Korea Photovoltaic Society
• /
• v.10 no.1
• /
• pp.9-20
• /
• 2024

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.28-33
• /
• 2020

In this study the possibility of hydrogen as a fuel in a small-sized two-stroke SI (Spark ignition) engine was investigated. For this purpose, experimental setup including an engine, a dynamometer, equipments for hydrogen and lubricant oil supply was prepared. And then preliminary experiments for the hydrogen-fueled engine combustion were conducted. In the case of hydrogen-fueled engines comparing to gasoline backfire occurs when the excess air ratio is lower than a specific value. This can cause engine power reduction and damage to the engine parts. The engine was controlled to operate at lean conditions to prevent backfire. Through the control of excess air ratio, the maximum engine brake power output of 3 kW was achieved in a 210 cc engine, while it was 6 kW in case of gasoline fuel.

• Journal of ILASS-Korea
• /
• v.26 no.4
• /
• pp.204-211
• /
• 2021

Lean combustion performance of natural gas and hydrogen was compared in a spark-ignition engine. The lean combustion engine operation with natural gas was limited due to combustion instability at an excess air ratio (EAR) above 1.8. The total hydrocarbon (THC) emissions increased significantly with increasing EAR. The nitrogen oxides (NO_X) emissions were also high due to the limitation of increasing EAR. The lean combustion engine operation with hydrogen showed superior combustion stability as well as low THC and NO_X emissions, even at high EARs. However, boosting technology was required to reach the high EARs.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.19-26
• /
• 2021

In this paper, we carried out the process modelling and economical analysis of the 500 kg-H₂/d-class green hydrogen production system process based on biomethane from the Food Bio Energy Center in Chungju. As a result of economic analysis, the NPV(Net present value) after 15 years of operation is 3.831 billion won, the PI(Profitability index method) is 1.42. It was found that the project of 500 kg-H₂/d-class green hydrogen production system has a 20.25% of IRR, which is higher than social discount rate of 4.5% and feasibility is ensured.