• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.92-100
• /
• 2010

A new class of electronically commutated brushless motor, the flux-switching motor(FSM) is gradually emerging in power tools and household appliances especially fan and pump application because of green policy. This motor offers advantages of high-power density and relatively high efficiency compare with induction motor, low cost and simple motor structure compare with bldc motor. This paper presents the principle of the FSM and design of the 12/6 pole FSM drive system for fan application. Finally, test results of the prototype motor are provided to verify a validity of the fan application with TMS320F2812 DSP and inverter.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.64-64
• /
• 2010

최근 그린 친환경, 지구온난화방지와 환경 부하물질저감, 기기 고효율화, 연비향상 등의 관점에서 항공기, 자동차 등 운송기계와 휴대용 전자제품 등 경량화가 요구되는 분야에서 경량합금의 사용이 급증하고 있다. 특히, 경량합금 중 가장 가벼운 마그네슘 합금은 최근 주목을 받고 있는 금속재료이다. 그러나 마그네슘합금은 알루미늄합금과는 달리 상온 성형성 및 접합성이 양호하지 않은 관계로 판재를 이용한 구조부품의 제작을 위해서는 많은 연구가 필요하다. 이러한 관점에서 본 연구는 마그네슘합금 판재의 마찰 교반 점용접을 시도하였다. CNC 밀링머신을 사용하여 프로브의 회전 및 삽입 속도에 변화를 주어 접합 특성을 평가하였고, 각 변수의 영향을 조사하였다. 적외선 열화상기와 로드셀을 사용하여 마찰 교반 점용접 중에 발생하는 교반부 온도와 접합부에 가해지는 수직부가하중의 거동을 측정하였다. 마찰 교반 점용접 후, 시험편의 접합 상태와 접합부 단면 관찰을 통해 접합 상태를 조사하였다. 그리고 인장전단 실험을 실시하여 마찰 교반 점용접된 시혐편의 접합강도를 평가하였고, 파단된 시험편의 파면을 관찰하였다.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.13-18
• /
• 2021

In plate forming technology, cylindrical drawing process is widely used in industry due to technological development. In this study, we used stainless steel 3042B and stainless steel 304J1, which are the most commonly used materials in the production of cold and hot water tanks for water purifiers, among cylindrical drawing products. Under the same conditions, the thickness of the sidewall of the product formed by drawn experiment was studied. As a result of the experiment, the bottom thickness of stainless steel 304J1 was considered to be thick. It is judged that the defect rate can be reduced by changing the breaking phenomenon of the floor surface of the cold and hot water bottles to the material of stainless steel 304j1. Stainless steel 304 2B material shows a sharp change in thickness from punch corner R to sidewall position, while stainless steel 304J1 material showed a uniform change from punch corner R to sidewall position. Stainless steel 304J1 material is considered to improve the clamping of the product in the process of extracting the product after hand drawing. The appearance of stainless steel 3042B products is considered to produce more wrinkles in the flange, which exerts greater tensile force on the sidewall during molding, resulting in uneven sidewall thickness.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.61-76
• /
• 2009

The purpose of this study are to investigate the reasonable maintenance expense of golf course according to the size and management system of each golf course. The maintenance cost per hole per golfer of 29 golf courses and the maintenance cost for items and locations of 8 golf courses were analyzed. 1. As golfers per hole increased, maintenance cost per hole per golfer decreased. 2. The decisive cost factors for maintenance cost of golf course are the number of annual golfers, the total course size, the management system, and automation of course facilities. 3. Maintenance cost of golf courses contained the landscaping areas except for building and parking lots is $869^{\}/_{m^2}$ Korean won. 4. Average maintenance cost of 8 golf courses is $44,325,000^{\}/_{hole}$. 5. Labor cost marked the largest portion in the total cost. Among the items of labor cost, repair cost for green ball mark was the highest with the ratio of 26%(\4,163,000). 6. Material cost for Fairways which reaches 30% of the total area was composed of $22%{\sim}44%$ of the total cost of materials. Cost of imported fertilizers, pestcides for insects and diseases, and sands for top dressing was the highest. 7. Material cost for Green which reaches 2% of the total area was composed of $28%{\sim}36%$ of the total cost. Cost of imported products such as particle-shaped fertilizers, micro mineral fertilizers, and soil conditioners was the highest. 8. There is no difference in cost between chemical fertilizers and the environmentally friendly fertilizers even if environmentally friendly fertilizers using microorganism or chitosan materials are also expensive.

• Clean Technology
• /
• v.28 no.3
• /
• pp.203-209
• /
• 2022

An environmental evaluation was conducted by employing LCA methodology for a mechanical seal manufacturing process that uses recycled silicon recovered from end-of-cycle PV modules. The recycled silicon was purified and reacted with carbon to synthesize β-SiC particles. Then the particles underwent compression molding, calcination and heat treatment to produce a product. Field data were collected and the potential environmental impacts of each stage were calculated using the LCI DB of the Ministry of Environment. The assessment was based on 6 categories, which were abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion and photochemical oxidant creation. The environmental impacts by category were 45 kg CO₂ for global warming and 2.23 kg C₂H₄ for photochemical oxide creation, and the overall environmental impact by photochemical oxide creation, resource depletion and global warming had a high contribution of 98.7% based on weighted analysis. The wet process of fine grinding and mixing the raw silicon and carbon, and SiC granulation were major factors that caused the environmental impacts. These impacts need to be reduced by converting to a dry process and using a system to recover and reuse the solvent emitted to the atmosphere. It was analyzed that the environmental impacts of resource depletion and global warming decreased by 53.9% and 60.7%, respectively, by recycling silicon from end-of-cycle PV modules. Weighted analysis showed that the overall environmental impact decreased by 27%, and the LCA analysis confirmed that recycling waste modules could be a major means of resource saving and realizing carbon neutrality.

• Food Industry And Nutrition
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2006

우리 전통술산업의 육성은 원료농산물의 소비증대와 수입주류의 대체, 전통문화의 복원 등 다양한 의미를 가지고 있다. 즉 쌀과 잡곡, 과일, 약초 등 우리 농산물로 빛은 민속주의 재현을 통해 개방여파로 인해 남아도는 우리 농산물의 소비증대와 국민들의 건강 증진, 전통문화의 계승발전에도 기여할 수 있기 때문에 산업적 활성화의 필요성이 크다. 특히 술은 지역축제나 관광, 예술 등과 결합한 고부가가치 문화상품이 될 수 있는 만큼 그린투어리즘(green tourism)이나 농촌문화관광을 풍요롭게 하는 중요한 컨텐츠가 될 수 있을 것으로 기대된다. 우리술산업의 활성화를 위한 정책과제로는 다음을 제시할 수 있다. (1) 우리술의 맛과 향, 숙취제거 등 품질을 개선하되 특히, 젊은층과 서민들의 기호에 맞으면서도 건강기능성을 가미한 다양한 제품의 개발과 포장 및 디자인의 개선이 필요하며 이를 위해 전문연구기관을 설립하거나 한국식품개발연구원을 통한 연구개 발과 교육 훈련이 선행되어야 한다. (2) 우리술의 품질관리와 차별적 유통을 위한 브랜드화가 필요한데 이는 지방자치단체와 관련업체에서 지역에서 생산되는 술에 대해 원료나 제조방법, 생산지역 등 품질기준과 표기방법을 제도화하고, 이를 소비자들에게 알리는 방법을 강구해야 한다 (3) 시음회나 품평회, 우리술페스티벌 등 다양한 이벤트행사를 통해 우리술에 대한 부정적 이미지를 개선하고 소비를 촉진하기 위해서는 적극적인 홍보와 판매촉진이 필요하다. (4) 우리 전통술의 품질향상과 가격인하를 위해 시설현대화와 기술개발, 포장 및 디자인개선, 원료구입, 홍보 및 판매촉진 등에 소요되는 자금을 지원하고 주세 차등화 등 조세감면과 경영컨설팅 등의 지원이 필요하다. (5) 현재 국회에 계류 중인 [전통술산업육성 및 지원법(안)]를 통과시켜 제도를 정비하고, 여러 부처에 흩어져 방치되고 있는 농민주 및 민속주 관련 행정체계를 정비해야 한다.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1671-1679
• /
• 2009

The existing subjects of supply chain management, which link business firms to customers, have focused on forward logistics such as acquisition of low and subsidiary parts, manufacturing, distribution and sales. Consequently, it is emphasized that supply chain management has to be a sustainable business activity. Nevertheless, capabilities of reverse supply chain management for domestic companies are still relatively limited compared to advanced foreign companies. For this reason, this study aims to develop the service platform, which provides information on return, retrieval, abolish and recycling using RFID, includes information on packing, placement, loading and unloading and transportation of the goods. In order to achieve the purpose of this study, the research previous studies and analyze achieved diverse cases on reverse logistics, review the present state, and propose service platform application to manage reverse supply chain which will be applied.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.90.2-90.2
• /
• 2011

세계 각 국에서는 선진국을 중심으로 기후변화와 치솟는 유가에 대응하기 위하여 다양한 에너지원의 확보를 위해 부단히 노력하고 있다. 특히, 신재생에너지원 중 에너지 지속성이 가장 우수한 연료전지의 경우 1kW급 건물용 연료전지시스템이 도시가스 인프라가 가장 우수한 한국 및 일본을 중심으로 상용화에 가장 근접해 있는 실정이다. 일본의 경우 가정용 연료전지시스템 '에너팜'의 일부 제품이 올해부터 200만엔대로 가격을 내려 보급되어질 예정이고, 아직은 경제성이 떨어지지만 연료전지 조기 상용화를 위해 시스템 가격저감을 통한 기술개발이 한창이다. 또한 700W급 고체산화물형 연료전지시스템을 세계에서 처음 시판 계획을 가지고 있다. 국내의 경우 2009년도부터 시작된 '그린홈 보급확대를 위한 건물용 연료전지 보조기기 가격저감 기술개발'연구를 통해 블로워, 밸브, 유량계 및 펌프 등의 보조기기의 단가를 낮추고자 기술개발에 박차를 가하고 있다. 이에 따른 연료전지 부품 가격저감 기술이 국내 건물용 연료전지 시장보급의 활력소가 되기를 기대한다. 본 연구에서는 건물용 연료전지의 보조기기인 블로워의 가격저감을 위한 연구의 일환으로 블로워의 안전성능 평가를 통한 보조기기의 가격저감 및 안전성을 확보하고자 한다. 1kW급 건물용 연료전지시스템의 여러 블로워 중 도시가스용 연료승압 블로워, 선택산화 공기 블로워, 버너 공기 블로워 및 캐소드 공기 블로워의 안전성능 평가를 수행하였고, 평가결과의 공유를 통하여 국내 블로워 제조사의 설계방향을 제시하고 연료전지시스템의 안전성을 확인하고자 한다. 특히, 내구성, 기밀, 가혹조건시험 및 소음, 진동, 습도, 온도와 같은 내주위환경시험 등의 평가결과 비교를 통하여, 연료전지 부품 인증기준을 재정립하여 연료전지 부품산업의 조기 활성화를 도모하고자 한다.

• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.401-408
• /
• 2007

The study aims to examine consumer awareness of green fashion products and demographic characteristics by subdividing environmentally conscious consumers of such products in the current domestic fashion market. It then compares the result with the characteristics of environmentally conscious consumers studied by 1999 in order to understand the trend of the consumer group in the fashion market and to promote the use of green fashion products. Marketing strategies for green fashion products suggested by the study are as follows: First, fashion firms are required to develop and publicize shops selling recycled or second-hand clothing that environmentally conscious consumers show constant interest. For instance, clothing patterns may be developed to enable consumers to make their kids' clothing easily at home, and various garments made from recycled materials may stimulate environmentally conscious consumers' desire to buy. Particularly, advanced technologies should be developed and publicized to manufacture garments that can excel existing ones made of normal materials in their features in order to satisfy consumers' interest in clothing made from recycled PET bottles. In addition, various natural dyes should be developed to decrease water pollution. Second, it seems imperative to develop clothing made of recycled knitted apparel that attracts consumers' interest more than ever, fashionable multi-purpose clothing, and environmentally friendly materials. As the use of natural fur or leather can cause the endangerment of wild animals and the destruction of the ecosystem, synthetic fur or leather may be used to develop sophisticated products with the same texture as real ones to attract environmentally conscious consumers' interest.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.321-331
• /
• 1999

The curing process is the final step in tire manufacturing whereby a green tire built from layers of rubber compounds is formed to the desired shape and the compounds are converted to a strong, elastic materials to meet tire performance needs under elevated pressure and temperature in a press. A numerical optimization procedure was developed to improve product quality in a tire curing process. First, a dynamic constrained optimization problem was formulated to determine the optimal condition of the supplied cure media during a curing process. The objective function is subject to an equality constraint representing the process model that describes the heat transfer and cures kinetic phenomena in a cure press and is subject to inequality constraints representing temperature limits imposed on cure media. Then, the optimization problem was solved to determine optimal condition of the supplied cure media for a tire using the complex algorithm along with a finite element model solver.