• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.253-261
• /
• 2018

Purpose: The purpose of this study was to analyze correlation between bruxism and occlusal contacts on balancing side. Materials and Methods: The purpose of this study is to compare the difference of group function and balancing side occlusal contacts according to bruxism and sex, A total of 100 adults that aged 26-37 years (39 bruxers and 61 non-bruxers) were examined. The lateral excursion and balanced occlusal contacts were analyzed to determine the correlation with bruxism. The occlusal contacts were recorded by T-Scan system and articulating paper. Results: The group function was the highest in 61.5% of bruxers and 47.5% of non-bruxers. In comparison between males and females, group function was 58.9% in males and 37.0% in females. Occlusal contacts on non-working side occurred in 48 out of 100 patients. There were 51.2% of the cases in the bruxers and 46.0% in the non-bruxers. Statistically, there was no correlation between the bruxism and occlusal contacts on non-working side. There was no correlation between sex and balancing occlusal contacts. Conclusion: There was no significant correlation between bruxism and occlusal contacts on non-working side. The group function was the highest in bruxers when lateral excursion was occurred.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.128-137
• /
• 2015

Purpose: Most of the former studies about the occlusal contact patterns during the mandibular movement focused on foreigner. The purpose of this study is analyzing the occlusal contacts of young Koreans by using T-Scan system. Materials and methods: The sample size was 87 and the occlusal contacts of each right and left lateral movements were measured from the maximum intercuspation to the 3mm excursive position for three times respectively. All of the occlusal contacts were double checked through the thin metal foil. The results were categorized as two; 1) considering occlusal contact patterns on working side only, 2) considering occlusal contact patterns on working and nonworking sides. Results: The results showed that the nonworking side occlusal contacts play major roles in the lateral mandibular movement. In both cases of considering with and without the nonworking side occlusal contacts, the group function was the most prevalent. In the working side, the contacts were the most frequent in canine and the frequency of contacts was decreased as the distance was increased from canine to molar. In the nonworking side, the contacts were the most frequent in second molar. And the gender factor was statistically significant (${\alpha}$=.05), as females have more nonworking side occlusal contacts in this study. Conclusion: Among the three factors of anterior guidance, the group function was the most dominant factor. The analysis of 87 samples showed that canine contact was the most frequent in the working side and second molar contact was the most common in the nonworking side.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.273-280
• /
• 2013

This study aims to examine the influences of wearing an occlusal biteplane splint on balance of the body. 10 subjects were selected who had neither impaired occlusion and masticating systems nor difficulty in walking along with no medical history in temporomandibular joint. Measurements were conducted with the Fukuda stepping test, the limits of stability test. The level of significance, ${\alpha}$ to determine the statistical significance was .05. Fukuda stepping test and the limits of stability test were put to the Wilcoxon signed test. As a result of this study, there was a significant difference in the moving distance in the Fukuda stepping test (p<.05). In addition, there were significant differences in the results of the limits of stability test (p<.05). In conclusion, the results of this study suggest that wearing the occlusal biteplane splint has an positive influence on the balance of the boby.

• Journal of TMJ Balancing Medicine
• /
• v.6 no.1
• /
• pp.27-28
• /
• 2016

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2010

The purpose of this study was to compare the strain on the alveolar ridge in the centric, eccentric and protrusive position according to the occlusal scheme (bilateral balanced occlusion with 33 degree anatomical teeth, group B; monoplane occlusion with non-anatomical teeth, group M; lingualized occlusion with 33 degree anatomical teeth and non-anatomical teeth, group L; of complete dentures. Experimental dentures were set bilateral balanced occlusion, lingualized occlusion and monoplane occlusion. They are analysed through T-Scan II(Tekscan, Boston, U.S.A) and 1.5mm thick layer was removed from the denture-supporting surface of resin model and then replaced with silicone to simulate resilient edentulous ridge mucosa. A $4{\times}6$ linear strain gauge is attached to the $1^{st}$ premolar and $1^{st}$ molar area. The strain values are recorded according to the occlusal scheme in the centric, eccentric and protrusive position after uniformly applying 50 N and 150 N force through a Universal Testing Machine(instron$^{(R)}$ 5567, Bluehill 2.0 software ,U.S.A.) with the models mounted in the articulator. When performing centric and protrusive occlusion, the three groups of occlusal scheme were compared in the anterior region and in the posterior region. The strains of each group were also compared in the working side and in the non-working side during eccentric excursion. It was observed that the strain in the bilateral balanced occlusion showed a higher value than the lingualized occlusion and monoplane occlusion in every position except the non-working side. However, during the eccentric movement the strain value in the non-working side showed the lowest value in the bilaterally balanced occlusion. The strain change amount from the working side or centric occlusion to non-working side and also the strain variation rate within the non-working side showed the highest value in bilateral balanced occlusion.

• 대한치과보철학회:학술대회논문집
• /
• 2004.11a
• /
• pp.85-85
• /
• 2004

• Journal of TMJ Balancing Medicine
• /
• v.13 no.1
• /
• pp.13-20
• /
• 2023

This case is intended to present the effectiveness of TMJ balance therapy, which normalizes the yin-yang balance of the cranial nervous system, including the meridian system. Temporomandibular joint balance therapy was performed on growing children with occlusal abnormalities, and clinical results were measured through specific observation of height and weight. The patient showed improvement in deep bite and satisfactory increase in growth after treatment. From these observations, it can be inferred that temporomandibular joint balance therapy has a positive effect not only on the brain nervous system but also on the action of pituitary hormones. For a more accurate evaluation, clinical and biological research on temporomandibular joint balance therapy (TBT) is needed.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.147-155
• /
• 2009

Occlusion force measuring and analysis is a diagnostic method of tooth dynamics through the related force analysis. In this paper, we design and implement a series of occlusion force measuring software and evaluate its utility as a base system for a new occlusion force measure and analysis system development. For the reason, we developed a group of tools to measure the normal and abnormal occlusion force. Firstly, we have visualized the occlusion force distribution with quantitative figures. The center of force (COF) variation was visualized the path of marker according to teeth dynamics and the distribution of occlusion forces in 14 tooth regions. Secondly, we have implemented a left and right tooth force balance measurement ratio tool to estimate a specific tooth region force. Furthermore, the measured occlusion force variation recorded in the software each 0.5 second. As the result of the physical examination by the accessed hardware of sensor sheet method, we confirmed the distribution and balance of forces effectively.

• Journal of Oral Medicine and Pain
• /
• v.17 no.1
• /
• pp.73-87
• /
• 1992

저자는 28명의 측두하악장애 환자와 31명의 정상인을 대상으로 최적기능교합의 개념에 입각하여 교합시의 치아접촉점을 동적이며 정량적인 방법으로 평가하여 교합안정장치의 사용으로 인한 교합안정성의 개선여부를 알아보고자 하였다. 이와 동시에 교근과 전측두근의 활성도를 측정하여 치료의 경과에 따른 근활성의 변화를 알아보기 위해 본 연구를 시행하였다. 측정항목은 개구범위, 두개하악장애지수, 치아접촉점 좌우균형치, 치아접촉점 전후균형치, 치아접촉점 평균시간간격, 치아접촉점의 개수, 접촉시간, 좌우측 교근과 좌우측 전측두근의 근활성, 근활성 비대칭 지수 등이었다. 이의 측정을 위해 T-Scan System, K-6 Diagnostic System 그리고 EM 2등을 사용하였으며 얻어진 자료에 대해 검정한 후 다음과 같은 결론을 얻었다. 1. 교합안정장치를 이용하여 측두하악장애 환자들을 4주간 치료한 결과 전반적인 임상증상이 호전되어 개구범위와 두개하악장애지수에 있어서 뚜렷한 개선이 있었다. 2. 측두하악장애 환자에서 최대 악물기시의 치아접촉점 좌우균형치및 평균시간 간격이 큰 것으로 나타나 치아접촉이 일어나는 순간의 교합안정성이 좋지 않은 것으로 평가되었다. 3. 치료 4주후 교하안정장치를 장착한 상태에서 측정한 치아접촉점 좌우균형치및 치아접촉점 평균시간간격은 치료전에 비해 개선된 것으로 나타났다. 4. 치료 4주후 치아접촉점의 전후방 분포가 구치부위로 이동되는 양상을 보였다. 5. 측두하악장애 환자에서 최대 악물기시의 좌우측 교근 및 전측두슨의 근활성은 정상인에 비해 낮에 나타났으며, 이는 치료기간 동안 감소되는 경향을 나타내었다. 6. 측두하악장애 환자에서 전측두근의 근활성 비대칭지수는 정상인에 비해 상당히 높게 나타났으며 이는 치료기간 동안 감소되는 경향을 나타내었다.

• 대한치과보철학회:학술대회논문집
• /
• 1995.12a
• /
• pp.41-42
• /
• 1995