• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.79-87
• /
• 2006

This paper presents the numerical model developed to simulate the solute transport in rough and smooth single fractures. The roughness of these fractures is represented by using the fractal surface method. In this study, the 3D transport model, which is based on the random walk technique, is used to simulate the dispersion process of a solute which is represented by numerical particles. As the simulation results, it can be observed that the dispersion of solute in the fracture is significantly affected by the fracture roughness and particle size.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.104-111
• /
• 2013

Deterioration is accelerated due to additional intrusion of chloride ion in crack width in cracked concrete. In this paper, modeling on equivalent diffusion coefficient in cracked concrete is performed for 1-D (Anisotropic) and 2-D (Isotropic) diffusion based on steady state condition. In the previous research, rectangular shape of crack was considered but the shape was modified to wedge shape with torturity. For verification of the proposed model, crack is induced in concrete sample and migration test in steady state is performed for 1-D diffusion. For 2-D diffusion, previous test results are adopted for verification. Through considering wedge shape of crack with torturity, diffusion coefficients in 1-D and 2-D diffusion are reduced, and the more reasonable prediction is obtained. The results from the proposed model with torturity of 0.10~0.15 are shown to be in the best agreement with the test results.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.4
• /
• pp.206-221
• /
• 2008

We have studied general orientational characteristics of microcracks distributed in Bulgugsa Granites of southwestern Gyeongsang Basin. Microcracks of 131 sets, which were developed on horizontal surfaces of II rock samples collected from Sacheon-Gosung, Geoje-si and Namhae-gun areas, were distinguished by image processing. Then, 45 sets with a distinct linear array on image were sorted out. These microcracks can be comparable with vertical grain planes. Orientations of these microcracks were compared with those of vertical rift and grain planes developed in Cretaceous and Jurassic granites of Korea. In the distribution chart, the agreement of the distribution pattern between microcracks of 45 sets and above vertical planes suggests that microcrack systems developed all over the study area also occur regionally in Cretaceous and Jurassic granites of Korea. Whole domain of the directional angle-frequency chart can be divided into 20 domains in terms of the phases of the distribution of microcracks. Meanwhile, 18 domains from 45 sets of microcracks were compared with the maximum principal stress orientations suggested from previous studies. The majority of maximum principal stress orientations pertain to domain $1{\sim}2$, $5{\sim}6$, $11{\sim}15$, $17{\sim}18$ and $19{\sim}20$, and these domains are coincident with the orientation of the 1st and 2nd-frequency orders represented in a rose diagram for 45 sets of microcracks. Representative orientations of open microcrack reflect the maximum principal stress orientations suggested in previous studies.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.4 s.41
• /
• pp.409-416
• /
• 1999

The fatigue crack growth analysis based on the fracture mechanics is useful to the estimation of the fatigue life on welded structures under cyclic loading. The analysis procedure in fatigue crack growth under uniform axial loading is applicable to bending fatigue problem as well. The intent of the present study is to show the procedure for calculating the fatigue crack propagation lifetimes of deckplates under bending stress and to explain the crack growth rates for the two dimensional crack problems. It is shown that the fatigue crack grows at a decreasing rate and the fatigue life depends on the initial crack length and the crack shape. The numerically predicted crack growth agree with the experimental data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.224-224
• /
• 2021

광학원격탐사를 통해 취득할 수 있는 초분광 영상은 관련 기술의 발전으로 다양하게 활용이 되고 있다. 특히 초경량 UAV를 기반으로 초분광 센서를 적용한 광학원격탐사는 광범위하게 분포하는 국내 제방의 불안정 요소를 탐지하는데 보다 효과적일 것으로 판단되며 대상에 대한 광역모니터링을 통해 많은 자료를 얻을 수 있고, 고해상도 영상 자료를 활용한 세밀한 분광 및 공간정보 분석이 가능하다. 본 연구에서는 제방 균열 평가를 위해 UAV를 활용하여 안동댐 하류 제방 균열을 대상으로 고해상도 초분광 영상을 취득하였으며, 기 개발된 제방 균열 평가 소프트웨어를 이용하여 조도와 최대강도 데이터에 따른 제방 균열 평가를 실시하였다. 연구지역의 지질은 중생대 백악기의 일직층으로써 적색이암, 셰일, 역질사암 등이 주를 이루고 있으며 제방 내 토양은 대부분 입도가 균일하며 일부 역암이 관찰되는 지역으로 조립토가 주를 이루고 있다. 기 개발된 소프트웨어의 특징은 측정된 데이터를 바탕으로 균열 여부를 판별할 수 있는 프로그램으로써 측정지점마다 별도의 조도와 최대강도 데이터가 주어졌을때, 해당 데이터에 대한 균열 여부를 판별할 수 있다. 주요기능은 제방 균열 여부 판단, 데이터 입력 및 판단을 출력하기 위한 GUI 인터페이스를 제공한다. 연구 결과 제방 균열 평가 소프트웨어를 적용하여 균열과 비균열에 대한 탐지가 가능한 것으로 나타났다. 특히 비균열 포인트의 경우 암석이나 토양의 성질, 빛의 반사에 따라 일부 차이가 있지만 균열은 매우 유사한 반사율 정보를 보이는 것으로 나타났다.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.33-42
• /
• 1999

In the present study, crack initiation criteria, static failure and tensile mode fatigue behavior for a rail steel are evaluated to assure the railway vehicle's safety. The transverse fissure, which is the most critical damage in the rail, is initiated by the maximum shear stress and its location is subsurface. In addition, the possibility of transition from the shear mode to the mixed mode increases with increasing the length of subsurface crack. Because of the brittleness by the welding, the fracture toughness of the welded part is lower than of the base metal. For low ${\Delta}K$, the stage II fatigue crack growth rates of the welded part is slower than of the base metal but, for high ${\Delta}K$, this different behavior for fatigue crack growth rate is nearly diminished. These trends are more remarkable for low stress ratio, R=0.1. It is believed that this behavior is caused by the change of the microstructure which that of the welded part is coarser than of base metal.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.195-206
• /
• 2005

Experimental research was performed on the 6m-6m two-span, continuous composite beams. Background research for the crack width control of continuous composite bridges in the Eurocode-4 is reviewed and equationsfor the calculation of crack width considering tension stiffening are presented. The behavior of the continuous composite beams was investigated using the initial and stabilized cracking process of the concrete slab in tension. Test results showed that the current requirement of minimum reinforcement for ductility in Korea Highway Bridge Design Codes could be reduced. The flexural stiffness of cracked continuous composite beams can be evaluated by the uncracked section analysis until the stabilized cracking stage. An empirical equation for the relationship between the stress of tensile reinforcements and crack width was obtained from the test results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.101-110
• /
• 2005

In Seoul, structural deterioration is severe in the private masonry buildings which have been built since 1906s. But most of these structures remain without any repair works. As a result, the rate of deterioration is getting faster and these dangerous structures may cause hazardous circumstances to the adjacent structures and neighborhood. The purpose of this study is to investigate the actual conditions of wall cracks among the defect types which occur in private masonry buildings and to analyze the correlation between safety grades and wall cracks for offering the fundamental data. Using these date we can establish basic criteria for safety grades of structures and improve the quality of masonry buildings. The result of this study indicate that there are high correlations between safety grades and the width of crack but much less so with the length. Furthermore, with regard to crack patterns, vertical cracks much more negatively effected the safety grades.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.2
• /
• pp.115-135
• /
• 2009

We have studied general orientational characteristics of microcracks distributed in Tertiary crystalline tuff from the northeastern part of the Gyeongsang Basin. 108 sets of microcracks on horizontal surfaces of 6 rock samples from Heunghae-eup and Cheongha-myeon, Pohang-si areas were distinguished by image processing. Those microcrack sets show a distinct linear array in 38 images. Whole domain of the directional angle(${\theta}$)-frequency(N) chart for crystalline tuff can be divided into 20 domains in terms of the phases of the distribution of microcracks. From the related chart, microcrack sets show preferred orientation which are coincident with the direction of vertical common joints. Consequently, the potential for macroscopic vertical joints in a rock body can be inferred from the directional angle showing high frequency in each domain of the related chart. This joint pattern is nearly the same in Mesozoic granites from Seokmo-do, Gwanghwa-gun. From the rose diagram for orientations of microcrack in crystalline tuff, orientations of dominant sets of microcracks in terms of frequency orders reflect representative orientations of maximum principal stress acted on crystalline tuff. Meanwhile, orientations of microcracks in crystalline tuff were compared with those of open microcracks in Bulgugsa granites from the southwestern part of the Gyeongsang Basin, and vertical rift/grain planes from Mesozoic granite quarries in Korea. In regional distribution chart, the agreement of distribution pattern between above two types of microcrack sets and vertical planes suggests that microcrack systems developed in crystalline tuff probably occur regionally in Mesozoic granites in Korea.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.3
• /
• pp.3-13
• /
• 2001

The behavior of the masonry lining is studied to gain basic information on how to reinforce the masonry tunnels. Apart from the previous works on the masonry structures, the multi-course masonry structure, realistic in field condition, is considered and the constitutive relationship of the masonry is, therefore, established. The design charts of the orthotropic material properties are proposed according to the stiffness ratio and the crack initiation and subsequent propagation model is also considered to model the brittle nature of the masonry. A numerical analysis on the masonry panel is investigated to verify the proposed model and future works of the masonry lining are briefly explained.