• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.117-128
• /
• 2006

For the legacy IEEE 802.15.3 WPAN protocol, an unpredictable piconet coordinator(PNC) leaving from a piconet without a proper handoff procedure causes an absence of PNC, and thus the piconet gets collapsed. In addition, several beacons from PNCs in adjacent piconets may be collided on a device(DEV) located between those piconets. This beacon collision eventually makes the DEV leave from the piconet. To remedy these two problems, we here propose an Active Seamless Coordinator Switching(ASCS) scheme and a PNC HB based Beacon Alignment(PHBA) one. In the ASCS scheme, a PNC assigns a number of DEVs as next possible PNCs in sequence for provisioning against the abrupt breakdown of the current active PNC. Each nominated DEV proactively sends a probe frame to confirm the operation status of the active PNC. For the case of no response from the PNC, the nominated DEV tries to become a new PNC immediately. In the second PHBA scheme, each PNC is allow to broadcast a special Heart Beat(HB) frame randomly during a superframe period. When a DEV receives a HB frame from other PNC, it promptly sends the related PNCs a special Hiccup Beat(HCB) frame with the superframe information of its associated PNC. As a result, the HCB frame makes both PNCs align their superframe beginning time in order to yield no more beacon collisions. For these two proposed schemes, we show the performance by simulations. We can confirm the enhancement of throughput for each superframe and average frame transfer delay, since each scheme can reduce the duration of piconet collapse. Finally, it is worth while to note that the proposed schemes can be operated with frames those are permitted in the legacy WPAN standard.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.111-121
• /
• 2007

During the whole month of December in 2005, Korea experienced both heavy snowfall and freezing temperature in southeast regions, which had caused frost related damages to many pavements laid on top of box culverts. In-situ observation revealed that the formation of ice lenses in subgrade and subsequent unbound layers led to upward heaving and transverse cracks in concrete and asphalt pavements. This has affected the long-term performance of pavements, as well as has threatened drivers' safety for a while. Recently, Korea Expressway Corporation has proposed a design guide to better protect newly constructed unbound pavement layers over culverts from frost heave. A trench drainage system has been selected to effectively draw off water and to alleviate pore-water pressure in soils during the coldest season. This paper presents experimental and analytical backgrounds behind this new design guide. Soil specimens retrieved from the sites are tested to quantify clay content and to estimate the permeability of subgrade. A 2-D ground seepage analysis has been conducted to better understand the changes in pore water pressures as a function of grain size. Finally, an optimum size of trench drainage is determined based on numerical analysis and workability in the field.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.78-87
• /
• 2021

This paper analyzes the range and attributes of the traffic information service between domestic public institutions and private companies, and suggests the possibility of joint application of node-link information for each company and the possibility of joint use of private traffic information. For this purpose, the present condition and attributes of domestic and foreign traffic information node-links (link length, node ID number, U-turn information, lane information, left turn information, right turn information, etc.) were analyzed. The analysis targets, the node-link of the national standard node and the two companies were analyzed. The area of the experiment was selected in Jongno-gu, Seoul, where standard-link information is complex, traffic volume is high, and various standard-links exist. The experiment was conducted by comparing and analyzing the traffic information attributes of three types of node-links and performing node-links overlapping matching (utilizing encoding_decoding method), and the possibility of matching node-links and attributes of different specifications was analyzed using Open LR technique.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.15-29
• /
• 2021

The signal intersection is the most challenging space for autonomous vehicles. To promote the safe driving of autonomous vehicles on urban roads with traffic signals, autonomous vehicles need to receive traffic signal information from infrastructure through V2I communication. Thus, a protocol for providing traffic signal information was added to the standard traffic signal controller specification of the National Police Agency. On the other hand, there are technical limitations when applying this to digital traffic signal controllers because the protocols are defined mainly for analog traffic signal controllers. Therefore, this study proposes developing a signal information linkage module to provide traffic signal information from a digital traffic signal controller to an autonomous vehicle and an algorithm improvement method that can provide accurate traffic signal information at the time of traffic signal transition.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.86-107
• /
• 2014

The large stone cist tomb 8501 of Lingcheng prefecture Xiaoheishigou, according to Chinese chronology, was built during the late Western Zhou period. However in this tomb not only Chinese Zhongyuan style bronze ceremonial vessels but also indigenous style bronze ceremonial vessels and instruments and hybrid bronze ceremonial vessels with a mixture of both indigenous and Chinese styles were excavated in large numbers. The bronze ceremonial vessel assemblage of Xiaoheishigou, in comparison with the decorum regulations and bronze cauldron and coffer system of the Chinese Zhongyuan region of the same time period, belong to that of the lowest status category. However, in contrast to the lowest class category tombs of the Chinese Zhongyuan region, in this tomb, with the exception of cauldrons and coffers, the remaining food and wine vessels of the assemblage match the standard of emperors and feudal rulers of vassal states. This is reinforced by the burial of musical instruments. Of the bronze ceremonial vessels of Xiaoheishigou large stone cist tomb 8501, the indigenous and hybrid styles, in consideration of manufacture technology seem to have been manufactured locally. However, the form, pattern and also the standards of the Western Zhou style bronze ceremonial vessels are identical to those of the Chinese Zhongyuan region and therefore it is clear that they were manufactured in Western Zhou. The reason for these precious ceremonial vessels which were manufactured and used in the many individual vassal states of the Chinese Zhongyuan region being buried in Xiaoheishigou, seems to have been the result of economic exchange and friendly political relations between the Xiaoheishigou and other groups rather than these vessels having been plundered by the Xiaoheishigou group. A distinct cultural sphere existed between the Upper Xiajiadian culture and Western Zhou which interacted frequently with both sides.

• Korean Journal of Environment and Ecology
• /
• v.35 no.1
• /
• pp.37-47
• /
• 2021

This study carried out the plant sociological survey of Abies nephrolepis forest in Mt. Seorak, which is in danger of deterioration due to the accelerated climate change. We examined seventy quadrats obtained from the survey and used the TWINSPAN technique to classify communities. We then performed the DCA method for the sequence analysis and analyzed the characteristics of each community. A. nephrolepis forest of Mt. Seorak is composed of four communities (A. nephrolepis-Lonicera caerulea var. edulis community, A. nephrolepis-Acer komarovii community, A. nephrolepis-Ac. pseudosieboldianum community, and A. nephrolepis-Betula costata community). Each community showed a different distribution according to location because different microenvironments are formed depending on location such as altitude and slope direction, resulting in different species composition. Each community showed differences in environmental characteristics such as altitude, rock ratio, soil characteristics, and litter layer thickness. As a result, there were significant differences between communities in the number of species and individuals, coverage, tree size, and species diversity, as well as differences in species composition. The A. nephrolepis-L. caerulea var. edulis and A. nephrolepis-Ac. komarovii communities were located in high altitude with high rock ratios and had little development of tree layer. On the other hand, the A. nephrolepis-Ac. pseudosieboldianum and A. nephrolepis-B. costata communities were relatively in low altitude with high soil ratio and had the development of tree layer with high species diversity.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.232-243
• /
• 2021

Purpose: The purpose of this study was to evaluate the shear bond strength of various 3D printed denture base resins and the conventional denture base resin to various denture relining materials. Materials and Methods: For denture base materials, a heatcured (Vertex RS) and two types of 3D printed DENTCA Denture base II, NextDent^TM Base) were used. And 4 types denture relining materials (Tokuyama Rebase II fast, Kooliner, Denture Liner, Denture Liner, Lang Jet Denture Repair Kit) with different components were used. It was classified into 12 groups. Adhesion was performed between the resin base and the relining materials in accordance with ISO/TS 11405 standard. The shear bonding strength was measured, and then the adhesion interface was observed with a stereoscopic microscope and a scanning electron microscope. The fracture pattern was investigated through the analysis of the fragment. Results: In the 3D printed denture resin group, the shear bonding strength with relining materials was significantly lower than that of the heat-cured resin group (P < 0.05). The group of polymethyl methacrylate -based relining materials, high shear bonding strength was shown regardless of the type of denture. As for the fracture pattern, adhesive fracture appeared in most groups, and cohesive, mixed fracture appeared in some groups. Conclusion: The polymethyl methacrylate -based denture relining materials showed high shear bonding strength values compared to other denture relining materials. But, for direct methods, it is considered advantageous in terms of shear bonding strength to use a isobutyl methacrylate-based denture relining materials.

• Journal of Life Science
• /
• v.32 no.6
• /
• pp.438-446
• /
• 2022

Some flowers have a high sensual appeal owing to their unique shape, color, smell, and taste and have been used as functional food and oriental medicine. Recently, edible dry flowers (EDFs) have attracted social attention as noble sources of functional teas. In this study, for the risk assessment of EDFs, pathogenic bacteria, heavy metals, and pesticide residues were monitored in 23 types of commercial EDF. No Enterobacteria spp. and Listeria spp. were found in all EDF products. However, common aerobic bacteria (3.24~3.85 Log CFU/g) were found in EDF, namely, Pueraria lobata, Chamaemelum nobile, Acacia decurrens, Rhododendron mucronulatum Turcz, Oenothera lamarckiana, Brassica napus, and Prunus serrulata. Staphylococcus aureus was found in 11 and Salmonella sp. was found in 8 of the 23 EDFs. Considering the cold extraction of EDF for tea and beverages, the regulation of pathogenic bacteria in EDFs is necessary. No heavy metals such as Pb, Cd, Co, Cr, Cu, Ni, and As were found in all EDFs, except the dry flower of Hemerocallis fulva, which contained Pb at 0.08 ppm. Different pesticides and fungicides were found in EDFs, but their concentrations were very low (0.01~0.08 ppm) and below the maximal residue level. Only the dry flower of Chrysanthemum morifolium had a high content of chlorpyrifos (0.215 ppm), which is long-lasting pesticide. Our results suggest that the establishment of EDF regulations for pesticide residue, culture separation between edible and garden flowers, and guidelines for preventing pathogenic microbial contamination are necessary.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.57-63
• /
• 2023

The external weather conditions including temperature and wind speed in the Saemangeum reclaimed land is different from that of the inland, affecting the internal environment of the greenhouse. Therefore, it is important to select an appropriate covering material considering the insulation effect according to the type and characteristics of the covering material considering the weather condition in the Saemangeum reclaimed land. A hexahedral insulation chamber was designed to evaluate the insulation efficiency of each glass-clad material in the outside weather condition in reclaimed land. In order to evaluate the insulation effect of each covering material, a radiator was installed and real-time power consumption was monitored. 16-mm PC (polycarbonate), 16-mm PMMA (polymethyl methacrylate), 4-mm greenhouse glass, and 16-mm double-layered glass were used as the covering materials of the chamber. In order to understand the effect of the external wind directions, the windward and downwind insulation properties were evaluated. As a result of comparing the thermal insulation effect of each greenhouse cover material to single-layer glass, the thermal insulation effect of double-layer glass was 16.9% higher, while PMMA and PC were 62.5% and 131.2% higher respectively. On average the wind speed on the windward side was 53.1% higher than that on the lee-wind side, and the temperature difference between the inside and outside of the chamber at the wind ward side was found to be 52.0% larger than that on the lee ward side. During the experiment period, the overall heating operation time for PC was 39.2% lower compared to other insulation materials. Showing highest energy efficiency, and compared to PC, single-layer glass power consumption was 37.4% higher.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.62-67
• /
• 2023

Due to the prolonged impact of COVID-19, the demand for Information Technology (IT) products is increasing, and their production facilities are expanded. Consequently, the use of harmful and dangerous chemicals are increased, the risk of fire(s) and explosion(s) is also elevated. In order to mitigate these risks, the government sets standards, such as KS C IEC 60079-10-1, and manages explosion-prone hazardous facilities where flammable substances are manufactured, used, and handled. However, using the standards of KS, it is difficult to predict the actual possibility of an explosion in a facility, because ventilation (an important factor) is not considered when setting up a hazardous work environment. In this study, the SEMI S6, Tracer Gas Test was applied to the chemical vapor deposition (CVD) facility, a major part of the display industry, to evaluate ventilation performance and to confirm the possibility of creating a less explosive environment. Based on the results, it was confirmed that the ventilation performance in the assumed scenarios met the standards stipulated in SEMI S6, along with supporting the possibility of creating a less explosive working condition. Therefore, it is recommended to use the prediction tool using engineering techniques, as well as KS standards, in such hazardous environments to prevent accidents and/or reduce economic burden following accidents.