• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.230-242
• /
• 2017

Seismic velocities measured from in-situ tests (n=177) and through rock core samples (n=1,035) are reviewed in light of construction standards, widely used standards as a first-hand approximation of rock classification solely based on seismic velocities. In-situ down hole tests and refraction survey for soft rocks showed seismic velocities of 1,400~2,900 m/s which is faster than those specified in construction standards. For moderate~ hard rocks, in-situ down hole tests and refraction survey showed 2,300~3,800 m/s which roughly corresponds with the range specified in the construction standards. A similar trend is also observed for seismic velocities measured from rock core samples. The observed differences between construction standards and seismic velocities can be explained in two ways. If construction standards are correct the observed differences may be explained with seismic velocities affected by underlying fast velocities and also possibly with selection of intact cores for velocity measurement. Alternatively, construction standards may have intrinsic problems, namely artificial discrete boundaries between soft rocks and moderate rocks, application of foreign standards without consideration of geologic setting and lack of independent verification steps. Therefore, we suggest a carefully designed verification studies from a test site. We also suggest that care must be exercised when applying construction standards for the interpretation and accessment of rock mass properties.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.517-523
• /
• 2007

Geophysical surveys(seismic refraction, electrical resistivity, and ground penetrating radar) were performed to delineate the weathering zone associated with vadose water in Chojeong area and investigate the fault related fracture zones. On the basis of seismic velocity structures, weathering layer for the southwestern part is interpreted to be deeper than for the northeastern part. The depth to bedrock(i.e., thickness of weathered zone) from seismic refraction data attempted to be correlated with drill-core data and groundwater level. As for the investigation of geological discontinuities such as fault related fracture zone, seismic refraction, electrical resistivity, and ground penetrating data are compositely employed in terms of velocity and resistivity structures for mapping of surface boundary of the discontinuities up to shallow depth. Surface boundaries of fracture zone are well indicated in seismic velocity and electrical resistivity structures. Accurate estimation of weathered zone and fracture zone can be successfully available for mapping of attitude of vadose water layer.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.1
• /
• pp.47-52
• /
• 2005

The purpose of this study was to provide the accurate information on improvement of visual life by examining old age's eye refraction state and investigating distribution of ametropia in old age. The test was performed the visual acuity test by object and subject methods to over 60 years of age. The results were as follows: 1. As the result to investigate the inconvenience degree of visual life, the subjects appealed 81% for very inconvenience and 14% for a little inconvenience. 5% of them didn't feel any inconvenience in visual life. 2. The eye types were 1.7% for emmetropia, 10% for myopia, 74.7% for hyperopia, and 13.6% mixed astigmatism, respectively. 3. The axis of astigmatisms were 65% positive for indirect astigmatism, 8% for direct astigmatism, and 27% for oblique astigmatism, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.330-330
• /
• 2012

일반적으로 투명전극 재료로서 이용되는 Indium Tin Oxide (ITO)는 높은 전기전도도에도 불구하고, 가시광선 영역에서 높은 광학적 투과도를 지니고 있다. 즉, 비저항이 $10^{-3}{\Omega}/cm$ 보다 작으면서, 380 nm에서 780 nm사이의 가시광선 영역에서 80%이상의 투과도를 가지는 우수한 transparent conducting oxide 물질로 인식되고 있다. 또한 이 물질은 가시광선 영역에서의 굴절률이 대략 2정도이기 때문에, 다른 반도체재료와 진공사이의 계면에서 발생하는 반사를 줄여, 태양광전지나 LED 등에 이용될 수 있는 무반사 코팅재로 이용될 수 있다. 이러한 이유로 현재 각 분야에서 ITO에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 ITO에 대한 기초연구로서, 전자빔 증착법으로 박막을 증착시키는 동안 증착속도에 따른 박막의 물성변화를 조사하였다. 또한 수직으로 증착할 때와 Glancing Angle Deposition 방법을 이용하였을 때, 증착속도에 따른 박막의 물성변화를 비교 분석하고자 하였다. 여기서, 증착속도는 $1{\AA}/s$에서 $4{\AA}/s$ 범위로 변화를 주었고, 증착물질과 기판의 각도는 $0^{\circ}$, $15^{\circ}$, $45^{\circ}$, $75^{\circ}$로 하였다. 먼저 수직으로 증착할 때, 증착속도의 변화에 따른 반사도, 투과도 및 굴절률과 증착단면의 구조를 비교하고, 다음으로 기판에 각도를 주어 박막을 증착하였을 때의 증착속도에 따른 박막의 광학적 및 구조적 물성의 변화를 측정하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.123-127
• /
• 2005

Surface refraction and crosswell seismic survey conducted as a part of geoscientific studies applied in an area of ground water reservoir shows that, 1) the average velocity with respect to depth is about 250 m/s for the surface layer (<4m), 2,500 m/s for the weathered formation, and greater than 3,500 m/s for the bed rocks, 2) the depth to the bedrock derived from the seismic studies and the sonic log (17m) is somewhat different from the depth obtained from the core study (25m).

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.21-25
• /
• 1998

We investigated the optical properties of lead zirconate($PbZrO_3$, PZ) thin films. The PZ films for the measurement of optical properties were prepared on ITO glass by sol-gel method. By post annealing, with annealing temperature $T=700^{\circ}C$, the pyrochlore phase of as-deposited specimen was transformed into the perovskite phase. The surface of films were plat, transmittance were from 60 to 80% at 480~2000nm, and refractive index were from 2.1 to 1.9 at 480~1000nm.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.435-439
• /
• 2009

The reason of lowering the dielectric constant of SiOC film was studied using parameters obtained from C-V measurement and refractive index. SiOC film was formed by the force of ionic bonding during the recombination of dissociated gases. Generally, the dielectric constant was obtained from the square of the refractive index or C-V measurement using the metal/insulator/Si structure. The dielectric constant consists of the ionic and electronic elements. It was researched about the dielectric constant of SiOC film using the average of the ionic and electronic elements. The dielectric constant decreased after annealing process. As deposited films trended toward the dielectric constant consisted of most ionic elements, on the other hand, annealed films mostly consisted of electronic elements. Because the effect of ionic elements reduced after annealing. Consequently, it was found that the electronic effect of SiOC film increased and the ionic effect of SiOC film decreased by the after-annealing.

• Journal of the Korean Vacuum Society
• /
• v.4 no.4
• /
• pp.386-393
• /
• 1995

이온주입된 실리콘 시료들의 열처리 조건에 따른 재결정화를 분광 타원해석법(Spectroscopic Ellipsometry, SE)을 사용하여 연구하였다. 열처리 후에도 잔류하는 결함들의 양과 분포를 구하기 위한 시료의 층구조 분석에 있어서 손상층의 유효굴절율은 Bruggeman 유효매질이론을 이용하여 구하였으며 기준 비정질실리콘 데이터로서는 완화된 비정질실리콘의 광학상수와 이온주입에 의해서 만들어진 비정질 실리콘의 광학상수를 함께 사용하였다. 조사된 대부분의 열처리 조건하에서 고체상 적층성장(solid-phase epitaxial growth)과정에 따라 비정질층이 재결정화되는 것이 관측되었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.1
• /
• pp.63-69
• /
• 2006

Clinical evaluation by Astigmatic Components of autorefractors was performed to examine validity and accuracy compared with subjective refraction. The mean cylindrical powers of Astigmatic Components of Subjective Refraction, Closed-view and Open-view were found to be $-0.689{\pm}0.516D$, $-0.691{\pm}0.530D$, $-0.470{\pm}0.507D$, respectively. The Difference of cylindrical Components between Subjective Refraction and Closed, Open-view were found to be $0.002{\pm}0.191D$, $0.015{\pm}0.137D$, respectively. Approximately 85% of Closed-view and Open-view autorefractor measurements were within ${\pm}20^{\circ}$ range of the difference of cylindrical axis with subjective refraction. The mean $J_0$ Components of Astigmatic Components of subjective refraction, Closed-view and Open-view were found to be $-0.155{\pm}0.332D$, $-0.004{\pm}0.178D$, $-0.001{\pm}0.156D$, respectively. The mean $J_{45}$ Components of Astigmatic Components, Closed-view and Open-view were found to be $-0.023{\pm}0.227D$, $-0.026{\pm}0.172D$, $-0.014{\pm}0.182D$, respectively. Both of the Closed-view and Open-view refractor showed available accuracy in measuring astigmatic components.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.693-698
• /
• 1998

The effects of $AI_{2}$$O_{3}$ and the ratio of $Na_2O/B_2O_3$ on the phase separation and optical properties of sodium borosilicate glass film fabricated by AFD(Aerosol Flame Deposition) were investigated. When AI,O, of 6wt% was added to $66SiO_2-27B_2O_3-7Na_2O$ the clear glass film without any crystallization was produced under air-quenching condition after consolidation. As the amount of $AI_{2}$$O_{3}$ increased from 1.5 to 6.0 wt% the refractive index linearly increased from 1.4610 to 1.4701, and the difference of TE and TM mode causing by residual stress in film increased gradually. However, the difference of TE and TM mode to reveal birefringence could be minimized by annealing below the glass transition temperature after consolidation and air quenching. On the other hand. as the ratio of $Na_2O/B_2O_3$ increased the refractive index and birefringence of glass film tended to increase, but the measurement of their values were not available at over the critical ratio of $Na_2O/B_2O_3$, because of the cloudiness due to crystallization. The phase separation was greatly accelerated with increasing the ratio of $Na_2O/B_2O_3$.