• Clean Technology
• /
• v.29 no.2
• /
• pp.95-101
• /
• 2023

An experiment was conducted to produce vaterite-type precipitated calcium carbonate from waste oyster shells in order to use them as recyclable resources. Calcined oyster shells containing calcium oxide as their main component were prepared at a temperature of 800℃ for 24 h. The oyster shells were dissolved in nitric acid or hydrochloric acid solution to make 0.1 M calcium nitrate or calcium chloride aqueous solution, and a carbonation reaction was performed using a 0.1 M sodium carbonate aqueous solution under various experimental conditions, which included varying the amount of aspatic acid additive, the amount of NH₄OH added, the reaction time, the reaction temperature, the stirring speed, and the type of dissolved acid. The XRD, SEM, and size distributions were analyzed and the vaterite content was calculated. Spherical precipitated calcium carbonate with a vaterite content of 95.9% was synthesized by adding 0.1 mol aspatic acid/1 mol CaO and 2 cm³ of NH₄OH, and reacting for 1 h at 25℃ while stirring at 600 rpm. The average particle diameter was found to be 12.11 ㎛. Calcium carbonate contatining high vaterite is used as high value added calcium carbonate for medical, food, inke additiver, etc.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.211-221
• /
• 2023

The purpose of this study is to improve the validity of the evaluation by adding the factor of academic achievement to the subject of evaluation, and to improve the reliability of the evaluation by verifying the legitimacy of control of in-class attitude and developing the correction index of satisfaction of teaching. The results of the study are as follows. Firstly, it was confirmed that the students' in-class attitude had a significant effect on satisfaction of teaching. The more positive the in-class attitude, the higher the satisfaction of teaching, and vice versa. Secondly, it was confirmed that the students' in-class attitude had a significant effect on academic achievement. The more positive the in-class attitude, the higher the academic achievement, and vice versa. Thirdly, it was confirmed that satisfaction of teaching did not have a significant effect on academic achievement. High satisfaction of teaching does not mean that the quality of the teaching is high, and vice versa. Fourthly, the correction index of satisfaction of teaching was developed to correct the results of satisfaction of teaching that may be distorted due to the students' negative in-class attitude. In conclusion, academic achievement should be added as the subject of evaluation in addition to the satisfaction of teaching to improve the validity of evaluation and the correction index of satisfaction of teaching should be applied to improve the reliability of evaluation.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.3
• /
• pp.321-346
• /
• 2023

A data paper describing research data helps credit researchers producing the data while helping other researchers verify previous research and start new research by reusing the data. Publishing a data paper and depositing data to a public data repository are increasing with these benefits. A domestic academic society that plans to publish data papers faces challenges, including timely acquiring tremendous knowledge concerning data paper structures and templates, peer review policy and process, and trustworthy data repositories, as a data paper has different characteristics, unlike a research paper. However, the need for more research and information concerning the critical elements of data paper and the peer-review process makes it difficult to operate for data paper review and publication. To address these issues, we propose essential concepts of the data paper and the data paper peer-review, including the process model of the peer-review with in-depth analysis of five data journals' data paper templates, articles, and other guides worldwide. Academic societies intending to publish or add data papers as a new type of paper may establish policies and define a peer-review process by adopting the proposed conceptual models, effectively streamlining the preparation of data paper publication.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.25-39
• /
• 2023

As the scope of supply chains expands globally, unpredictable risks continue to arise. The occurrence of these supply chain risks affects port cargo throughput and hinders port operation. In order to examine the impact of global supply chain risks on port container throughput, this study conducted an empirical analysis on the impact of variables such as the Global Supply Chain Pressure Index (GSCPI), Shanghai Container Freight Index (SCFI), Industrial Production Index, and Retail Sales Index on port traffic using the vector autoregressive(VAR) model. As a result of the analysis, the rise in GSCPI causes a short-term decrease in the throughput of Busan Port, but after a certain point, it acts as a factor increasing the throughput and affects it in the form of a wave. In addition, the industrial production index and the retail sales index were found to have no statistically significant effect on the throughput of Busan Port. In the case of SCFI, the effect was almost similar to that of GSCPI. The results of this study reveal how risks affect port cargo throughput in a situation where supply chain risks are gradually increasing, providing many implications for establishing port operation policies for future supply chain risks.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.629-646
• /
• 2023

Host rock of Cheonjeon-ri petroglyph is shale belonging to the Daegu Formation of Cretaceous Gyeongsang Supergroup. The rocks were hornfelsified by thermal alteration, and shows high density and hardness. The petroglyph forms weathered zone with certain depth, and has difference in mineral and chemical composition from the unweathered zone. As the physical deterioration evaluations, most of cracks on the surface appear parallel to the bedding, and are concentrated in the upper part with relatively low density. Breakout parts are occurred in the upper and lower parts of the petroglyph, accounting for 6.0% of the total area and occurs to have been created by the wedging action of cracks crossing. The first exfoliation parts occupying the surface were 23.8% of the total area, the second exfoliations covered with 9.3%, and the exfoliation parts with three or more times were calculated as 3.4%. It is interpreted that this is not due to natural weathering, and the thermal shock caused by the cremation custom here in the past. As the ultrasonic properties, the petroglyph indicates highly strength in the horizontal direction parallel to bedding, and the area with little physical damage recorded mean of 4,684 m/s, but the area with severe cracks and exfoliations showed difference from 2,597 to 3,382 m/s on average. Physical deterioration to the Cheonjeon-ri petroglyph occurred to influence by repeated weathering, which caused the rock surface to become more severe than the inside and the binding force of minerals to weaken. Therefore, it can be understood that when greater stress occurs in the weathered zone than in the unweathered zone, the relatively weathered surface loses its support and exfoliation occurs.

• Clean Technology
• /
• v.29 no.4
• /
• pp.305-312
• /
• 2023

Due to the strengthening of environmental requirements, aging denitrification facilities need to improve their performance. The present study aims to suggest the possibility of improving performance using computational analysis techniques. This involved modifying both the geometric design and the operating conditions, including the flow path shape of the equipment such as the inlet guide vane and the curved diffusing part, and the flow control of the ammonia injection nozzle. The conditions presented in this study were compared with existing operating conditions in terms of the flow uniformity, the NH₃/NO molar ratio of the mixed gas flowing into the catalyst layer, and the total pressure drop of the facility. The flow field applied in the computational analysis ranged from the outlet of the economizer in the combustion furnace to the inlet of the air preheater, the full domain of the denitrification facility. The performances were derived by solving the flow fields using ANSYS-Fluent and the injection amount of ammonia was adjusted for each nozzle using Design Xplorer. Compared to the denitrification performances of the equipment currently in operation, the conditions proposed in this study showed an improvement in the flow uniformity and NH₃/NO composition ratio by 45.1% and 8.7%, respectively, but the total pressure drop increased by 1.24%.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.259-271
• /
• 2023

Since the short-wave infrared spectrum has a significant range of variation depending on the production environment, countries with advanced resource exploration are collecting the spectrum and building a database. Representative organizations include the USGS and CSIRO, and they are currently carrying out a project in China that can synthesize and use a large number of existing data. The USGS library provides a total of 2,457 spectra targeting not only minerals but also various materials that respond to infrared radiation. Among these, there are 1,276 mineral spectra, which are about half of the total. The spectrum title includes information, such as analysis devices (NIC4, BECK, ASDNG, etc.), purity codes (a, b, c, d, u), and measurement methods (AREF, RREF, RTGC, TRAN). Analyzed raw data are provided in ASCII and GIF format. The CSIRO library has a total of 502 spectra, of which the majority, 493, correspond to mineral spectra. The USGS library is a free, publically available resource, while the CSIRO library is bundled with TSG8 or must be purchased separately. Among these, when comparing the eight spectra whose spectral shapes can be analyzed with the spectra of domestic illite, the positions of the absorption peaks are significantly different from those of domestic illite, except for one Japanese illite. Additional research will be needed to determine the causes of such differences, and the domestically relevant databases should be established as well.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.2
• /
• pp.1-13
• /
• 2022

This study derived the success factors of youth enterprises by applying the Delphi Method to start-up experts. Through this, it aims to improve understanding of youth enterprises in entrepreneurship education and start-up support projects and contribute to the development of education and support programs suitable for youth enterprises. Also The purpose of this study is to help youth entrepreneurs solve their curiosity about the success factors of youth enterprises, identify the factors that youth entrepreneurs should first secure or perform among the factors they need to consider during start-ups, and use limited resources efficiently and effectively to succeed. In this study, the Delphi Survey was conducted twice in total. The first Delphi Survey utilized the Modified Delphi Method using structured closed-ended questions, and a pilot test was conducted on youth entrepreneurs and start-up experts to compensate for the problem of the Modified Delphi Method. In the first Delphi Survey, IBM SPSS Statistics 22 and Microsoft Office Excel 2016 were used to calculate the mean, standard deviation, median, interquartile range, and content validity ratio. In the Delphi 2nd survey, the same statistical values in the 1st survey and additionally cronbach's alpha were calculated. As a result of the Delphi Survey, four factors, such as the entrepreneurial characteristics, entrepreneurial preparation, entrepreneurial strategy, and entrepreneurial environment, and 22 sub-factors were derived as success factors for youth enterprises.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.237-244
• /
• 2024

We studied the effects on their academic achievement of chemistry II and advanced chemistry subjects of science high school students according to the type of class (face-to-face and non-face-to-face). The subjects of this study were 195 first-year students of G Science High School located in Gyeongnam. The average scores of Chemistry II and Advanced Chemistry in non-face-to-face classes in 2020 and face-to-face classes in 2021 were compared and analyzed. As a result of comparing and analyzing the academic achievement according to the class type, students' grades in Chemistry II and Advanced Chemistry were higher in non-face-to-face classes. In the comparison of academic achievement by level according to class type, Chemistry II showed higher average grades in non-face-to-face classes as the lower level were, and in advanced chemistry, the higher the upper grades in non-face-to-face classes. In addition, in terms of the effect of changes in class form on the upper and lower 10% levels of academic achievement of Chemistry II, the upper 10% showed high grades in face-to-face classes and the lower 10% in non-face-to-face classes. On the other hand, in advanced chemistry, the average grade of non-face-to-face classes was higher than that of face-to-face classes in the top 10%, and the average grade of face-to-face classes was higher than that of non-face-to-face classes in the bottom 10%. Through these results, it was found that in the teaching-learning of science high school students, instructors need to design and treat teaching-learning appropriate to the level of academic achievement.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.2
• /
• pp.3-10
• /
• 2024

The purpose of this study is to analyze the effects of smart construction equipment applied at the construction site of the first smart city in the Korea and derive an application strategy for the utilization of smart construction equipment. To achieve this, aythors examined the practical effects and issues of safety systems and construction systems utilizing machine guidance (MG) technology, which is a representative smart construction equipment used in civil engineering construction sites. Both the MG safety system and MG construction system were found to be sufficiently effective in improving construction productivity. However, there are challenges that need to be addressed, such as the approval process for work results using MG systems, system changes due to frequent replacement of on-site equipment, and usability improvements for elderly on-site workers. The study presented some solutions that have been implemented on-site to address these issues. The utilization effects and issues presented in the study were analyzed through direct feedback from workers and managers who have utilized the MG technology on-site for a considerable period of time. These results can be used as preliminary data for the similar construction projects, considering the limited availability of empirical analysis data for equipment automation.