• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2008

International Standardization in all technical area is gaining its momentum as its impact and implication over global trade is directly linked. The worldwide competition to secure a dominant position in the standardization process is ever growing over the years. In 2005, the International Technical Committee on Nuclear Instrumentation, which is a subunit of International Electro-technical Commission (IEC), was held in Korea under the auspices of MOST (Ministry of Science and Technology). Korea has adopted its Rule and Regulation as the National Standard. As a part of a link to National Mid-and Long-term Atomic Energy R&D Program of MOST, the technical development of a performance test for the radiation monitors was carried out under mechanical environment and electromagnetic immunity conditions. The characteristics of the radiation fields were also evaluated under the conditions and introduced to a techniques of performance test for the radiation protection instrumentation adopted IEC61526 standards and it's results was analyzed. We would like to share the experience gained in these efforts, failure as well as success, and to discuss the problems encountered and serious consideration to be taken into account in the future endeavor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.54-61
• /
• 2019

This paper reports a comparative review of the service quality attributes of Electronic Customs Clearance (UNI-PASS) by applying the Kano model, Timko's BW coefficients, and IGA model, as reported by Tontini et al. in terms of a service quality evaluation of electronic customs clearance as the comprehensive national customs administration information system. In addition, this study examined which quality attributes should be focused on to improve the service quality and enhance customer satisfaction using the electronic customs clearance service. The Kano, Timko, and IGA models were classified into the four common quality attributes: attractive quality, one-dimensional quality, must-be quality, and indifferent quality. Because the integrated approach was used, one-dimensional quality was included in the area for critical improvement, while the must-be quality was included in the area for intensive maintenance. In addition, the indifferent quality was included in the area of carefree, while the attractive quality was included in the area of competitive advantage.

• Korean journal of applied entomology
• /
• v.62 no.2
• /
• pp.69-78
• /
• 2023

The currently implemented Positive List System, sales manager training, and pesticide sales record systems focus on the safety of determined pesticide use, but the proposed agrochemical pharmacist (AP) system aims accurate diagnosis and reasonable prescription. In this study, 81% of famers claimed expert assistance for purchasing and applying pesticides, and 42~86% of sales managers insisted on the strengthening expertise in diagnosis and prescription. In the institutionalization of AP, a special implementation guideline is essential to embrace the present sales managers with long experience. Sales managers of commercial and agricultural cooperatives recognize the qualifications of agrochemical pharmacists as a strategy to differentiate themselves from competitors, and increase sales through market positioning of "pesticides prescribed by trustworthy agrochemical pharmacists", not sales managers anymore.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.483-490
• /
• 2012

In parallel with advancement of the industrial society and accompanied quality-of-life improvement, jewelry is now rather viewed as one of common accessories used in daily life, than as a luxurious item as treated before change of perception about it in the past, attracting thus gradually multiplying demand for it. Thanks to rapid spread of multi media like the Internet, an increasing number of people have come to develop great liking for exceptional design and unique format of jewelry products. Following drain of their reserves, natural gems are unlikely to meet the demand for them fully in the future. As a consequence, it seems essential to rely on synthetic, artificial, imitation jewelry or organic substances and quasi-mineral in amorphous structure for substitute jewelry. Since synthetic jewelry has such a great potential as substitute jewelry, it is expected to maximize added value to jewelry if and when accompanied with development of creative design and upgrading of processing technology for jewelry, in addition to various types of synthetic jewelry and glass that have been already put in use as substitute substances. Synthetic jewelry is thus believed to be able to greatly contribute to progress of the jewelry industry. In many countries of the world, jewelry and gem industry has been regarded as one of promising sectors vital in enriching the national wealth. In this context, the Korean Ministry of Finance and Economy announced in July 2007 "an activating policy for the jewelry and gem industry, declaring to cultivate and grow it to be new engine for the nation's growth". The present paper thus aims to conduct a study exclusively on cutting design of synthetic jewelry as a part of measures to activate the jewelry industry in Korea. Efforts are made to develop designs for jewelry that are unique and different from the conventional stereotyped form of polishing and are added with color, pattern and fashionable cutting. Priority is given in this regard to designing jewelry that may attract general public and may be shared by public beyond the limit of conventional design for jewelry and producing products that stand in contrast with other products. By upgrading the quality of jewelry design, competitiveness of the jewelry industry may be ensured and the creative area of jewelry design may be expanded by far.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.1
• /
• pp.189-206
• /
• 2012

It is urgently requested to innovate the management process of business-service areas in all industry such as financial business, services and manufacturing because of recent business trend - de-manufacturing trend and the weight increment of service in all industries. Many enterprises introduce various management - innovation methodologies in order to meet the rapidly changing business environment. Especially in Korea, it is a vogue to introduce the innovation methodology of the advanced company's. According to this style, the six sigma has been introduced over 10 years since late 1990's and it has become a synonym of innovation indeed. But the result of six sigma introduction has not reached to the level of expectation in its beginning. And the "Lean" have been introduced in Korea in the situation of global financial crisis, economic slump and the pursuit of developing country such as China. Many Korea companies pay attention to the "Lean" innovation activity because the TPS(Toyota Production System) is the matrix of Lean and is the motive power of Toyota growth. In this study, it was analyzed for the evolution course, distinctive features and effects of Lean management and was examined for the difference of Lean management between manufacturing industry and business-service areas. From this results, the characteristics of Lean management in business-service was analyzed. After survey of innovation agent in Korea company, the Lean model of business-service Industry was developed and applied. This study will be worthy to show the right direction to the enterprises which are to apply lean methodologies, or the enterprises which examine lean management for competitive advantages or the peoples who research the same topics.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.2
• /
• pp.380-420
• /
• 2014

We increasingly see the importance of employees acquiring enough expert capability or innovation capability to prepare for ever growing uncertainties in their operation domains. However, despite the above circumstances, there have not been an enough number of researches on how operational input components for employees' innovation outcome, innovation activities such as acquisition, exercise and promotion effort of employee's innovation capability, and their resulting innovation outcome interact with each other. This trend is believed to have been resulted because most of the current researches on innovation focus on the units of country, industry and corporate entity levels but not on an individual corporation's innovation input components, innovation outcome and innovation activities themselves. Therefore, this study intends to avoid the currently prevalent study frames and views on innovation and focus more on the strategic policies required for the enhancement of an organization's innovation capabilities by quantitatively analyzing employees' innovation outcomes and their most suggested relevant innovation activities. The research model that this study deploys offers both linear and structural model on the trio of learning, innovation capability and innovation outcome, and then suggests the 4 relevant hypotheses which are quantitatively tested and analyzed as follows: Hypothesis 1] The different levels of innovation capability produce different innovation outcomes (accepted, p-value = 0.000<0.05). Hypothesis 2] The different amounts of learning time produce different innovation capabilities (rejected, p-value = 0.199, 0.220>0.05). Hypothesis 3] The different amounts of learning time produce different innovation outcomes. (accepted, p-value = 0.000<0.05). Hypothesis 4] the innovation capability acts as a significant parameter in the relationship of the amount of learning time and innovation outcome (structural modeling test). This structural model after the t-tests on Hypotheses 1 through 4 proves that irregular on-the-job training and e-learning directly affects the learning time factor while job experience level, employment period and capability level measurement also directly impacts on the innovation capability factor. Also this hypothesis gets further supported by the fact that the patent time absolutely and directly affects the innovation capability factor rather than the learning time factor. Through the 4 hypotheses, this study proposes as measures to maximize an organization's innovation outcome. firstly, frequent irregular on-the-job training that is based on an e-learning system, secondly, efficient innovation management of employment period, job skill levels, etc through active sponsorship and energization community of practice (CoP) as a form of irregular learning, and thirdly a model of Yί=f(e, i, s, t, w)+${\varepsilon}$ as an innovation outcome function that is soundly based on a smart system of capability level measurement. The innovation outcome function is what this study considers the most appropriate and important reference model.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.3
• /
• pp.607-641
• /
• 2017

Recently, there has been an increase in government-wide demand for technological cooperation between government funded research institutes (GFRIs) and small and medium-sized enterprises (SMEs), while there remain a tension between positive and negative views regarding the support given by GFRIs to encourage the technological innovation of SMEs. Although preceding studies have found that the support given by GFRIs to SMEs tends to have the effect of enhancing the technological innovation outcomes of SMEs, this study examines the question of why the agent that provides technological cooperation to SMEs should be limited to GFRIs. To answer this question, in this study, we first examined the qualitative changes in the external technological cooperation behavior of SMEs over time, from 2007 to 2014. Next, we performed cluster analysis to examine whether there were distinctive characteristics of SMEs that engage in technological cooperation with GFRIs, compared to the various other alternatives available as technological cooperation partners for SMEs. Lastly, to help us identify the characteristics of the companies that technologically cooperate with GFRIs and to facilitate the administrative or practical effort to find companies that would be strong candidates for technological cooperation with GFRIs, we used discriminant analysis to define a discriminant formula for such companies likely to engage in technological cooperation. The results of this study were as follows. First, GFRIs were the most competitive -- as demonstrated by the highest level of satisfaction, etc. - compared to the other alternatives for external technological cooperation available to SMEs. This confirmed the necessity for GFRIs to provide technological cooperation to SMEs. Secondly, the issue of whether the small and medium-sized enterprise had engaged in technological cooperation specifically with GFRIs was found not to be a very significant factor in distinguishing these companies. It was found, however, that SMEs engaged in technological cooperation were distinctive, regardless of the type of institution involved in the technological cooperation. Thirdly, SMEs that were in technological cooperation with GFRIs had the characteristics of being already active in joint research and already familiar with utilizing the systems available for governmental support. The findings of this study offers various insights relevant to establishing national R&D strategies using GFRIs and improving the efficiency of policies and administrative practices intended to help GFRIs assist SMEs.

• Food Industry
• /
• s.180
• /
• pp.27-64
• /
• 2004

국내 제조업 전체에서 식음료품은 $6.31\%$를 차지하고 있다. 2000년을 기준으로 식품산업의 총매출실적을 보면 32조 3,463억원을 기록하고 있는데, 이 중 식료품은 26조 921억원, 알콜올음료를 포함한 음료품은 6조 2,516억원을 차지하고 있다. 2001년, 음료시장의 규모는 약 2조 7,900억원 정도였다. 빠르게 성장하던 전체 음료시장의 매출은 IMF 이후 약간 주춤하는 경향을 보였지만 지속적으로 매출액이 상승하여 2002년에는 3조 4천억원의 매출을 기록하였다. 이것은 사이다, 후레바, 정통주스, 냉장주스, 스포츠 음료, 두유 및 기능성음료 등이 성장을 주도하였다. 2003년 상반기, 1조 6,500억원으로 전년 동기대비 $3\%$ 감소하였지만 2003년 전체 실적은 대략 지난해와 비슷한 3조 5,000억원 규모로 전망된다. 내수량의 경우 탄산음료와 과즙음료가 감소하는 경향을 나타냈지만, 전체적으로는 증가하였다. 다류시장의 규모는 약 650억원, 캔커피시장의 규모는 2,400억원 정도로 나타났다. 이처럼 음료$\cdot$다류 시장은 전체적으로 약 4조원의 거대시장규모를 형성하고 있으며 내수가 지속적으로 증가되고 있어, 점차 시장규모도 증가할 것으로 전망되고 있다. 최근에는 기능성 음료 및 다류의 시장규모가 전체의 $20\%$에 달할 정도로 신장하였으며, 기능성음료 및 다류의 특허출원도 지속적으로 증가하고 있는 실정이다. 이는 비단 국내에서 뿐만 아니라 세계적인 현상이며 이러한 추세는 앞으로 지속될 것으로 전망되고 있다. 이처럼 기능성음료 및 다류의 성장이 두드러지고 있는 것은 시대가 변하면서 현대인들의 생활방식과 식생활 변화, 질병형태 다양화 등 여러 사회적 여건이 변화되고 있는데 기인하며, 현대인의 건강에 대한 관심의 증대는 음료시장의 쾌속성장과 틈새수요를 지속적으로 창출하고 있다. 현재 세계 건강기능성 식품의 시장 규모는 약 160조원이며, 국내의 경우 약 1조원에 이르는 실정이다. 이 중 기능성음료 시장은 국내에서 약 4천억원 규모로 기능성식품 시장의 $40\%$를 차지하고 있다. 이처럼 기능성음료 시장은 최근 연간 $7\%$ 정도의 빠른 성장률을 보이고 있으며 향후에도 $6.7\%$의 실질 연간 성장률을 지속할 것으로 전망되고 있다. 전해질(이온)음료나 식이섬유를 포함하는 다이어트음료에서 출발한 기능성음료는 숙취해소, 성인병 예방, 스트레스 해소에 이르기까지 각종 질병의 치료 및 예방으로 확대되고 있다. 앞으로는 BT 및 나노 기술 등을 이용한 신기능 소재들에 대한 다각적인 효능의 규명에 따른 음료$\cdot$다류 소재의 개발과 더불어 체질개선, 다이어트, 숙취해소 등의 특정한 기능성과 관련한 음료$\cdot$다류의 특허출원이 계속될 것으로 전망된다. 복잡한 한약의 제조과정을 단순화하여 티백이나 캔 형태로 만든 맛과 기능이 조화된 음료$\cdot$다류 분야의 연구개발이 지속될 것으로 보이며, 시장 규모의 확대와 더불어 기능성과 간편성을 동시에 추구하는 신세대 소비자들의 성향을 겨냥하여 기존의 음료$\cdot$다류 전문 업체 외에도 제약회사 등의 비음료 업체도 다양한 형태의 음료$\cdot$다류 기술개발을 지속할 것으로 예상되고 있다. 특히 새로운 신기능성 소재를 개발하는 것은 고부가가치 기술로써 BT, NT 등의 최첨단 기술의 발전과 도입으로 인해 그동안 수입에 의존하던 기능성 소재들도 국내 기업들의 축전된 기반기술을 통하여 대거 참입할 것으로 보인다. 하지만, 여러 업체의 음료$\cdot$다류시장 진출에 따라 야기될 수 있는 비위생이고 효능이 불확실한 식품의 유통, 업체간의 과열경쟁에 따른 유통질서 문란 등은 모처럼 활기를 되찾은 음료$\cdot$다류 분야의 기술개발을 위축시킬 수도 있으므로 정부차원에서 체계적이고 효율적인 관리가 조속히 이루어져야 할 것이며 이를 제도적으로 뒷받침하기 위한 정책이 수립되고 시행되어야 할 것으로 보인다. 특히, 원료적인 측면에서의 무역 불균형은 반드시 해소되어야 할 부분이다. 대부분이 수입 기능성 원료에 의존하고 있는 현실에서 국내의 BT 기술 확충에 더욱 많은 투자와 노력이 집중되어야 할 것이다. 세계적으로 경쟁이 될 수 있는 기능성 소재의 개발과 이를 통한 신기능 음료의 개발은 단순한 수학적 계산을 넘어서 국가의 기술력을 홍보할수 있는 좋은 계기가 되기 때문이다. 바야흐로 음료$\cdot$다류 분야에 대한 열기가 식품시장을 주도하면서, 시장이 안정적으로 확대되기 위해서는 지속적인 기술개발이 이루어져야 한다는 것은 재론의 여지가 없다고 하겠다.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.52-63
• /
• 2015

Business facilities among domestic architectures have rapidly been constructed along with domestic economic development. It is an important facility taking the second largest proportion next to apartment buildings among current 31 building types of fire department classification of 2012 year for urban architectures. The expected service life of business facilities is 15 years, but 70% of those in urban areas have surpassed the 15 year service life as of the present 2014. Thus, the demand for urgent rehabilitation of such facilities is constantly increasing due to the aging and performance deterioration of the facilities'main finishing materials. Especially, the business facilities are being used for the lease of company office or private office, and such problems as aging and performance deterioration of the facilities could cause less competitive edge for leasing and real estate value depreciation for the O&M (Operation & Management) agent and the owner, respectively. Therefore, an effective planned rehabilitation as a preventive measure according to the standardized repair rate by the number of years after the construction is in need in order to prevent the aging and performance deterioration of the facilities(La et al. 2001). Nonetheless, domestic repair/rehabilitation standards based on the repair rate are mainly limited to apartment buildings and pubic institutions, resulting in impractical application of such standards to business facilities. It has been investigated and analyzed that annual repair rate data for each finishing material are required for examination of the applicability of the repair rate standard for the purpose of establishment of a repair plan. Hence, this study aimed at developing a repair rate computation model for finishing materials of the facilities and verifying the appropriateness of the annual repair rate for each finishing material through a case study after collecting and analyzing the repair history data of six business facilities. The results of this study are expected to contribute to the planning and implementation of more efficient repair/rehabilitation budget by preventing the waste of unpredicted repair cost and opportunity cost for the sake of the business facilities' owners and O&M agents.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.1-13
• /
• 2016

This study aims to observe the impacts of entrepreneurship and market orientation of Seoul's business incubator (BI) CEO's on business performance, as well as investigate the moderating effects of BI supporting services. The main objectives of this study are as follows: first, to observe how the entrepreneurship of CEO's affects business performance; second, to observe how CEO's market orientation as a cultural factor attributes to business performance; third, to verify whether the utilization level of BI supporting services shows moderating effects between entrepreneurship and business performance, and finally to verify whether the utilization level of BI supporting services shows moderating effects between market orientation and business performance. Business incubators in Seoul registered with the Business Incubator Association were surveyed both online and offline to receive 127 responses out of 320 circulations. By filtering out insincere reponses, 117 were used for statistical analysis. Our results assert that the utilization level of physical BI supporting services does indeed strengthen the relation between initiative and financial performance. Also, it is interesting to note that the utilization level of physical BI supporting services supports the relation between risk sensitivity and financial performance. While risk sensitivity on its own shows no positive effect on business performance, a suitable utilization level of BI supporting services is likely to strengthen the connection. In addition, the utilization level of both physical and non-physical supporting services shows a moderating effect between initiative and non-financial performance. Based on the results above, risk-taking business incubator CEOs with initiative are likely to yield better financial performance in terms of increasing sales, if provided with various physical supporting services such as sufficient educational facilities including communal spaces and conference rooms.