• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.2
• /
• pp.112-117
• /
• 2002

This study was conducted to investigate effects on the co-situs application of coated urea complex fertilizer in dry seeded rice in Dukpyong series soil. Number of spikelet established in 15 days after seeding, conventional plot was $120ea\;per\;m^2$. and whole layer placement(WLP), co-situs application 70%(CSA70%) plot and co-situs application 50%(CSA50%) plot were 146, 126 and $120ea\;per\;m^2$, respectively. There was not concentration obstacle in co-situs application plot in spite of closing application between seed and coated urea complex fertilizer. The amount of $NH_4-N$ into soil solution in different growth stage was highest in WLP 70% plot compare to other treatment. N uptaken amount was highest in CSA 70% plot as $94kg\;ha^{-1}$ compare to $90kg\;ha^{-1}$ of WLP 79% plot and $82kg\;ha^{-1}$ of CSA 50% plot. However, N use efficiency of CSA 50% plot was highest among treatments as 48%. Rice yield was highest in CSA 70% plot as 102% compared to conventional plot.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.323-331
• /
• 1995

This study was undertaken to investigate the changes of tooth contacts following orthodontic treatment , using T-Scan system. Occlusal contacts in maximum intercuspation were examined in 26 patients at the end of the active phase of orthodontic treatment and again 3 months into the retention phase to abbess the initial posttreatment occlusal changes. The obtained results of this study were as follows : 1. The mean total number of contacts increased from 11.27 at the end of orthodontic treatment to 13.15 at the fellow up visit, which was found to be statistically significant (P<0.05). 2. The change of number of contacts on anterior teeth was unchanged. 3. The change of number of contacts on posterior teeth was found to be statistically significnat (P<0.01). 4. The change of fetal number of teeth in contact was significant (P<0.05). 5. The number of ant. teeth in contact was slightly increased. but Which was not found to be statistically significant (P>0.05). 6. The number of post. teeth in contact significantly increased, which was statistically significant (P<0.05). 7. A statistically significant relationship was found between the total number of contacts at the end of treatment and the change in the contacts over time. The fewer the number of tooth contact was at the end of orthodontic treatment, the greater number of tooth contact increased over time(r=-0.38, P<0.05).

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2009.03a
• /
• pp.153-159
• /
• 2009

불연속변형해석(DDA)은 유한요소법(FEM)과 개별요소법(DEM)의 장점을 모두 가지고 있는 해석법이다. 3차원 불연속변형해석의 안정성과 해석속도는 접촉찾기(Contact Detection) 알고리즘과 벌칙스프링(Penalty spring)을 이용한 접촉처리 알고리즘에 의해 크게 좌우되는데, 블록의 꼭지점(vertex) 간의 접촉이 발생할 경우, 적합한 접촉면을 결정하는 과정에서 많은 해석오류와 시간적 손실이 발생할 가능성이 있다. 본 연구에서는 블록의 꼭지점에 내접하는 구(inscribed sphere)를 삽입하여 가상의 접촉점과 접촉면을 생성하는 알고리즘을 연구하였다. 이로 인해 발생할 수 있는 해석의 오차의 크기를 확인하고, 간단한 불연속 변형해석의 해석 실례에 적용해 보았다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.153-155
• /
• 2011

우리나라 연안에는 64개의 해상교량이 건설되어 있고, 11개가 건설 중에 있으나 해도에는 해상교량의 높이(형하고)만이 표시되어 있으나 가항수역 폭(경간 폭)이 표시되어 있지 않다. 2010년 9월 예인선열이 견내량해협에 위치한 (구)거제대교와 접촉하는 사건이 발생하였다. 이 글은 이 (구)거제대교 접촉사건을 통해 VTS센터 관제사의 역할과 해도에서 선박이 안전하게 통항할 수 있는 해상교량의 높이와 폭을 확인할 수 있도록 개선방안을 제시하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.554-570
• /
• 1990

he rolling contact behaviors between a smooth ball and a flat rough surface under dynamic load are intricately affected by many factors, such as the diameter of a ball, normal load and the roughness of a flat surface etc. Accordingly, the experimental study is done to find them on the base of elastic hysteresis loss as theoretical approach is very difficult. The experimental apparatus composed of damped-free vibration system is used. This paper investigates the damping characteristics on the rolling contact area through rolling friction force and logarithmic decrement versus displacement obtained in accordance with the variations of those factors, and presents a new experimental method to find out contact width using the relations of logarithmic decrement and rolling friction force with displacement.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.61-66
• /
• 1999

반복 응력 상태 아래서 알루미나 세라믹의 피로 표면손상 누적현상이 분석되었다. 연속 미끄럼 접촉 시에 발생하는 응력 상태를 재현하기 위해서 동시에 작용하는 수직-수평 반복 압축하중 기법이 사용되었다. 알루미나 구와 평판의 접촉면에서 알루미나 미세 결정의 피로 파손에 의한 마모 입자 형성 기구가 관찰되었고, 반복하중의 횟수와 수직-수평 하중비가 커질수록 마모량은 증가하였다. 반복 접촉하중에 의한 표면손상 누적이 접촉 수직 변위 측정으로 정량화 되었다. 두 접촉 구조물의 강성 (하중-변위 선도의 기울기) 변화가 두 재질의 탄성계수의 변화로 표현되었다.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.236-242
• /
• 2009

This paper presents a numerical analysis method to determine flange contact at variable wheel positions. The shapes of the wheel and rail surface functions with surface parameters. The Newton-Rhapson method for wheel-rail contact can provide fast solutions, but may not yield true values at optimization process with the condition that minimum distance is zero can time-consuming. A compound method, combining the Newton-Rhapson methods the optimization process method is proposed to provide exact solutions efficiently.

• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.35-42
• /
• 1989

악구강계의 질환을 진단하고 치료후의 예후를 판정하기 위하여 maximal clenching시에 측정된 tooth contacts의 수와 분포가 이용되어 왔다. 그러나 maximal clenching시 반복된 tooth contacts의 측정은 저작근 피로등 문제점을 가지고 있다. 본연구는 건강한 성인 15명을 대상으로 maximal clenching 및 habitual clenching시 T-Scan system을 이용하여 치아접촉 수와 접촉시간을 측정, 비교 검토하여 habitual clenching을 이용한 방법이 Tooth contacts의 연구에 이용될 수 있는지를 확인 하는데 목적이 있으며, 연구결과는 다음과 같다. 1. Habitual clenching시 upright, semisupine position에서의 전측두근의 근활성은 maximal clenching시의 64.5%, 61.9% 및 73.3%로 나타났다. 2. Maximal clenching시 치아접촉 수와 접촉시간은 16.82개 및 0.429초로 나타났으며 habitual clenching시에는 11.65개 및 0.177초로 나타났다. 3. 치아접촉수와 접촉시간은 체위에 따라 크게 변화되지 않았다. 4. 치아접촉수와 접촉시간의 측정시에 habitual clenching을 이용하는 방법이 maximal clenching을 이용하는 방법보다 재현성이 더 높은 것으로 나타났다. 5. Tooth contacts의 연구시 habitual clenching을 기준으로 사용할 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.305-319
• /
• 2000

Numerical solution lot frictional contact problems of nonlinearly deformable bodies having large deformation is presented. The contact conditions on the possible contact points are expressed by using the contact error vector, and the iterative scheme is used to reduce the contact error vector monotonically toward zero. At each iteration the solution consists of two steps : The first step is to revise the contact force by using the contact error vector given by the previous geometry, and the second step is to compute the displacement and the contact error vector by solving the equilibrium equation with the contact force given at the first step. Convergence of the iterative scheme to the correct solution is analyzed, and the numerical simulations we performed with a rigid-plastic membrane and a nonlinear elastic beam.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1992

A method analizing contact pressure between plate and elastic half space is presented by using F.E.M. With the method, the pressure intensities at surface nodes of half space cae be directly calculated by using flexibility matrix of half space. The method is originally presented by Y.K. Cheung et al.(3) Insted of Y.K. Cheung's method, which use a conception of equi-contact pressure area around each surface nodes of half space in the noded rectanqular element area. We use the equi-contact pressure area around the Gaussian integration points of half space surface in the noded isoparametric element area. Numarical examples are presented and compared with other's studies.