• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.751-759
• /
• 2008

In this study, the effect of an unsteady flow field around a body of aerostatic/aerodynamic forces were investigated using rectangular cylinders (B/D = 2, 3, 4, 5). Proper orthogonal decomposition (POD) was introduced to the analysis of the fluctuating pressure field that was measured on the stationary/oscillatory B/D=4 rectangular cylinder, and the characteristics of the proper functions with flow patterns were identified. In addition, the physical decoupling and interactions in the different co-existing flow patterns were investigated through POD. The comparison with the identified proper function associated with a particular flow pattern revealed that the Karman vortex is almost not affected by the separation bubble, but that the Karman vortex considerably interferes in the development of the separation bubble around the trailing edge. It can be considered that the Karman vortex induces the increment of the curvature of the substantial separated flow.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.280-286
• /
• 2001

10 이하의 저유전율을 갖는 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스의 미세구조와 고주파 유전특성을 조사하였다. (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 정방정(tetragonal) 구조를 가진다. 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$세라믹스는 BaWO$_4$와 $Mg_2$SiO$_4$의 상들이 공존하는 혼합상을 보였으며, $Mg_2$SiO$_4$가 이차사으로 형성된 것이 관찰되었다. 120$0^{\circ}C$~140$0^{\circ}C$에서 2시간 동안 소결된 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 $\varepsilon$$_{r}$=6.37~8.21, Q.f=15000~99422 그리고 $au$$_{f}$=73.9~48.9 ppm/$^{\circ}C$의 고주파 유전특성을 가졌다. $\tau$$_{f}$를 보정하기 위해, CaTiO$_3$(1,5 wt%)가 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x$\geq$0.9) 세라믹스에 첨가되었다. 135$0^{\circ}C$에서 2시간 동안 소결된 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$+CaTiO$_3$(5 wt%) 세라믹스는 $\varepsilon$$_{r}$=7.3, Q.f=30532 그리고 $\tau$$_{f}$=-30 ppm/$^{\circ}C$의 고주파 유전특성을 얻었다. 얻었다.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.92-95
• /
• 2005

$Zn_{1-x}\;^{57}Fe_xO(x=0.01, 0.02, 0.03)$ compounds were fabricated using the solid-state reaction method. In order to determine magnetic behavior and ionic state of the doped transition metal ($^{57}Fe$) in ZnO, we carried out $M\ddot{o}ssbauer$ measurements at various temperatures ranging from 13 to 295 K. $M\ddot{o}ssbauer$spectra for $Zn_{0.97}\;^{57}Fe_{0.03}O$ at 4.2 K have shown the ferromagnetic phase (sextet), but the only paramagnetic phase (doublet) is seen at 295 K. The hysteresis loop below 77 K for $Zn_{0.97}\;^{57}Fe_{0.03}O$ indicated the coexistence of ferromagnetic and paramagnetic phases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.70-80
• /
• 2007

For supporting various mobile networks, this paper proposes a framework of distributed connection admission control, named SmartCAC. Especially, intelligent CAC operations are adopted in terms of interoperation between mobile nodes and mobile networks. This scheme does not need to correct information between networks. Basically vertical handover call can use guard channel that was reserved for handoff, because SmartCAC addresses the identification between vertical handover call and new call, delay and reliability as requirement of QoS for efficient connection control. The scheme also uses mobile terminal speed for network filtering. Especially an extended protocol is proposed to give different network states information to mobile nodes because there have been no ways for mobile nodes to compare the states of different networks. Sophisticated simulation study is performed in order to evaluate SmartCAC in terms of signaling cost. As a result, signaling cost of ours is up to 96% better than that of the existing scheme.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.51-51
• /
• 2011

Acetate 섬유는 고감성 제품의 대표적 핵심소재로서 실크와 같은 우아한 광택과 청량감을 주어 고가의 의류제품으로 사용되지만 편직 및 염색가공 공정이 까다롭고 비교적 저분자량의 분산염료로 염색되어 내열성, 염색견뢰도 및 물에 대한 형태안정성이 떨어진다. 특히, Acetate 편직물은 이태리나 일본 등 섬유선진국에서도 제조가 까다로운 기술적 난이도가 매우 높은 제품군이다. 반면 Tri-Acetate는 Acetate의 장점을 가지면서 내열성, 내세탁성, 원상회복력(resilience)등이 우수하여 기존 Acetate 시장의 고급제품 용도로의 전개가 가능할 뿐만 아니라 PET 등의 물성 및 형태가 다른 복수의 소재성분을 직물 사이에 공존시킴으로써 새로운 태, 기능, 외관, 광택의 부여가 가능하며 이를 활용한 차별화된 고부가가치 시장의 창출이 기대된다. Acetate와 Tri-Acetate 모두 셀룰로오스의 친수기가 아세틸화된 구조를 가지는 소수성 섬유로 분자구조가 치밀하여 분산염료로 염색된다. 그러나 일반적으로 Acetate 섬유의 경우 Acetate용 일반분산염료를 사용하여 저온상압염색을 하는 반면, Tri-Acetate의 경우 고온고압 분산염료를 사용하여 고온고압염색을 한다. PET와 Tri-Acetate 복합소재의 경우, 두 소재의 염색거동이 비슷하여 고온고압 분산염료로 염색이 가능하지만 T/P 복합소재에 상응하는 염색을 위해서는 복합소재를 구성하는 각각의 섬유소재에 적합한 염료의 선정 및 염색법의 개발이 필요하다. 본 연구에서는 Tri-Acetate 및 T/P 복합소재에 대한 염색최적조건을 규명하고자 염색온도별, 2종의 분산염료의 농도별 염색성, 염색시료의 인열강도 및 견뢰도를 측정하여 적정조건을 도출하였다.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.316-328
• /
• 2003

In this paper, we propose and analyze two adaptive channel allocation schemes for supporting multimedia traffics in hierarchical cellular systems. It is guaranteed to satisfy the required quality of service of multimedia traffics according to their characteristics such as a mobile velocity for voice calls and a delay tolerance for multimedia calls. In the scheme 1, only slow-speed voice calls are allowed to overflow from macrocell to microcell and only adaptive multimedia calls can overflow from microcell to macrocell after reducing its bandwidth to the minimum channel bandwidth. In the scheme II, in addition to the first scheme, non-adaptive multimedia calls can occupy the required channel bandwidth through reducing the channel bandwidth of adaptive multimedia calls. The proposed scheme I is analyzed using 2-dimensional Markov model. Through computer simulations, the analysis model and the proposed schemes are compared with the fixed system and two previous studies. In the simulation result, it is shown that the proposed schemes yield a significant improvement in terms of the forced termination probability of handoff calls and the efficiency of channel usage.

• Membrane Journal
• /
• v.29 no.1
• /
• pp.61-65
• /
• 2019

Anisotropic particles have been issued in various fields due to their unique physical properties. Herein, a novel dynamic phase separation method (DPS) is introduced to fabricate anisotropic acorn-like nanoparticles. DPS consists of two dynamic conditions; solvent evaporation and nonsolvent induced precipitation. The bottom layer is controlled by feeding the water as a non-solvent diluent, and the phase separation of the upper layer relies on the diffusion and evaporation of a volatile good solvent. At this condition, the acorn-like particles were fabricated. Under a closed box filled with water (spontaneous phase separation), monodisperse polystyrene (PS) particles were synthesized. At the coexistence between DPS and spontaneous phase separation, the sizes of cap and particle were changed. Also, the volume of PS solutions influences on the particle shape. Since the unique structures could be utilized into various applications, if advanced techniques such as membrane-based controlled water feeding is developed, monodisperse acorn-like particles could be tuned.

• Composites Research
• /
• v.34 no.4
• /
• pp.264-268
• /
• 2021

In this study, we propose a method for fabricating hydrophobic coatings/films with three-dimensional (3D) hierarchical nanostructured organic/inorganic composite surfaces. An epoxy-based, large-area 3D ordered nanoporous template is first prepared through an advanced photolithography technique called Proximity-field nanoPatterning (PnP). Then, a hierarchically structured surface is generated by densely impregnating the template with silica nanoparticles with an average diameter of 22 nm through dip coating. Due to the coexisting micro- and nano-scale roughness on the surface, the fabricated composite film exhibits a higher contact angle (>137 degrees) for water droplets compared to the reference samples. Therefore, it is expected that the materials and processes developed through this study can be used in various ways in the traditional coating/film field.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.495-502
• /
• 2023

If traditional Korean villages or residential districts have formed a community on the ground of coexisting with nature, there is a different historical development process in which many European cities have created residences for multi households on the basis of roads and blocks in fortresses. Along with the modernization of society together with large-scale housing supply, the urban landscape of series of large apartment complexes has become universal views of our urban structure; thus, the viewpoint that small and medium-sized block-based collective housing, which are more common urban structures in European cities can be linked to the improvement of urbanity and neighborship is examined. Through the process, the possibility of expanding collective housing supply based on small and medium-sized blocks as an alternative method other than complex-type apartments based on superblock, I would like to make meaningful in terms of how we can change the fundamental mutual relationship with our lifestyle and the tangible change of collective housing types which has large impact on our lives.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2001

In order to analyze the dynamic motions of fish cage systems made of a frame and a netting under the conditions of waves and current, the hydraulic model experiment at towing tank and the numerical computation using boundary integral element method based on linear potential theory were carried out on a square and a circular type of fish cage, The computed and measured results for the dynamic motions of model fish cage systems showed that the heave and pitch motions were almost unaffected by the inclusion of nets, while the surge motions were very reduced by drag force acting on them. In addition, irregular wave-induced motions of fish cages included non-negligible 2nd order harmonic components at high frequency nearly twice the wave frequency. The reason why these motions were considered was due to resonance or structural components of frames being overflown and out of water during a wave cycle. It was found that circular type was more desirable structure in the open sea than square one only in the respect of dynamic motions due to waves and current. Further verifications were needed considering hydrodynamic forces, fatigue life, and structure analysis based on long term stochastic waves including frequency and time domain for the purpose of analyzing and designing fish cage systems.