• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.3
• /
• pp.273-287
• /
• 2006

This study investigates the failure mechanism and load-carrying capacity of a single-shell lining which has no disturbance in transfer of shear force, with respect to a conventional double-shell lining which has separation between layers of shotcrete lining and secondary concrete lining by water-proof membrane. In order to evaluate the capacity, a 2-D numerical investigation is preliminarily carried out and then real-scale loading tests with tunnel lining section specimens are performed on the condition given by the numerical investigation. In the test, a concentrated load is applied for considering a released ground load or rock wedge load. Through this study, it appears that the single-shell lining takes the load-bearing capacity 20% higher than in case of the double-shell lining. In addition, a possibility of a composite single-shell shotcrete layer composed by multiple bonded layers partly involving different contents of high-capacity additives is shown thereby leading to use of less amount of the high-capacity additives on the condition of taking a similar load-bearing capacity.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.237-249
• /
• 1998

In this study the support deflection effects in beam-girder slabs which are broadly being adopted in building structures are studied for both distributed loads and concentrated vehicle loads. Taking the finite element analysis of slabs supported with one or two cross beams, the member forces of slabs including the support stiffness have been calculated. Based on the obtained numerical results and regression analysis of those, correction factors of member forces for slabs supported with girders and cross beams have been proposed. Finally, the validity of the proposed correction factors are demonstrated through a typical design example.

• Journal of the Korean Institute of Gas
• /
• v.18 no.6
• /
• pp.14-20
• /
• 2014

In this study, the stress analysis for the piping support design is performed as per the rules of the ASME Code, Section III, subsection NF-Component Support which provides a simplified method of design analysis for piping support. This method makes use of simple equations and conservative allowable stress limits for design and service loadings. For the base plate, code equation is satisfied within the allowable limits. Both anchor bolts and pipe strap are governed by the their interaction equations. The stresses resulting from various loadings and their combinations are within the allowable limits specified in the above mentioned ASME Code. Thus, it was proved that the structural integrity of the pump assembly was satisfactory.

• Journal of Families and Better Life
• /
• v.21 no.2
• /
• pp.49-60
• /
• 2003

The purpose of this study was to explore the nature of adolescents' relationships with intimate and important people in their lives who are seniors to them. A sample of 1,220 adolescents was surveyed with a questionnaire. The questionnaire included questions on perceived support from non-parental senior figures as well as on adolescents' self-esteem. The results showed that. (a) Adolescents perceived their relatives to be more important than their teachers. (b) Male adolescents perceived support from a larger number of relatives than their female counterparts, whereas female adolescents perceived more support from their close senior figures than their male counterpart. (c) Adolescents' perception of support was different by their father's occupational status. (d) Overall, male adolescents's self-esteem was higher than female adolescents. The adolescents whose fathers held higher-status occupations had higher self-esteem than the adolescents whose fathers held lower-status occupations. (e) Male adolescents' self-esteem was affected by their GPA, father's occupational status, and the number of seniors whom they met on internet, and the amount of perceived support. Female adolescents' self-esteem was affected by father's occupational status and the amount of perceived support.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.198-203
• /
• 2005

Melt extrusion foaming process for the preparation of poly(L-lactic acid) (PLLA) scaffolds was carried out and the effects of foaming conditions on the pore structure of PLLA scaffolds and their mechanical properties were investigated. The porosity and mechanical properties of fabricated scaffolds were compared with the scaffolds obtained from the salt leaching method as well. It was found that the optimum pore structure was achieved when the PLLA melt was kept in extruder for the maximum decomposition time of blowing agent. In order to maintain the proper scaffolds structure, the blowing agent content should be less than $10\;wt\%$. It can be concluded that melt extrusion foaming process allows for the production of scaffold having higher mechanical properties with reasonable pore size and open cell structure for hard tissue regeneration even though it has less porosity than scaffolds made by salt leaching process.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.395-402
• /
• 2009

The atomic force microscopy(AFM) has been used, as a powerful tool, to investigate physical properties of supported-lipid layers. Prior to the advent of the AFM, no observation was performed for the physical phenomena at the nanometer-scale. This microscope provides nanometer-scale morphology by scanning surfaces with the cantilever and presents force curve by monitoring the behavior of the cantilever that approaches to surface and retracts from the surface. From the morphology, the structures of the supported lipid layer and the effect of other molecules on the structures have been investigated. From the force curve, the surface properties-electrostatic and mechanical properties-of the supported lipid layers have been studied. In this article, characterization of the structure and surface properties of the supported lipid layer is explained. Future perspectives and direction are also discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.311-313
• /
• 2014

전동기는 산업 전 분야에 걸쳐 다양하게 사용되는 회전기기로서, 소형화, 경량화, 고속화하는 추세에 있다. 이는 전동기 프레임의 구조강성을 약화시키고, 축계 위험속도를 낮춤으로써 진동에 취약한 구조를 가지게 된다. 회전체 진동 관련 규정 중 API 684 에서는 베어링 지지강성이 베어링 강성에 비해 3.5 배 이하인 경우 베어링 지지강성이 위험 속도 해석 모델에 포함되어야 함을 명시하고 있다. 산업 현장에서는 베어링 지지강성을 정확하게 산출하기 어려워 이를 고려하지 않고 회전체를 설계하는 경우가 많아 실제 조건에서 예측하지 못한 진동 문제가 발생할 가능성이 있다. 본 논문에서는 전동기 베어링 하우징 및 프레임에 대한 가진 시험을 통해 얻은 주파수 응답함수의 실수부를 분석하여 베어링 지지강성을 추출하는 방법을 제시하였다. 이를 바탕으로 유한요소 해석모델을 이용하여 베어링 지지강성을 해석적으로 예측하는 기법을 정립하였다. 추출된 베어링 지지강성을 축계 해석 모델에 포함하여 베어링 지지강성 포함 유무에 따른 축계 위험속도 및 안정성을 비교하였다. 그 결과 베어링 지지강성을 포함한 경우, 보다 정확한 위험속도 및 진동응답 수준을 예측할 수 있음을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.209-218
• /
• 2017

This study examined the influence of social support (social support from family, social support from friends), psychological behavioral characteristics (self-esteem, interpersonal dependency, locus of control), and stress on the depression levels of college students. The study subjects were 546 college students in D city. The survey was conducted using a self-administered questionnaire in October 2015. As a result, the depression levels were significantly higher in the group showing lower family and friends' social support, self-esteem, and locus of control, while it was significantly higher in the group showing higher interpersonal dependency and stress. The depression levels of the subjects showed a negative correlation with family and friends' social support, self-esteem, and locus of control, but a positive correlation with interpersonal dependency and stress. Covariance structure analysis revealed an increase in the depression levels of college students when the awareness of the stress source was higher, and when the awareness of social support or psychological behavioral characteristics was lower. These results suggest that the depression levels of college students would be increased when the social support and psychological behavioral characteristics are low, and when stress is high. In particular, it was influenced much more by stress than other factors. Therefore, to decrease the depression levels of college students, it would be necessary to put efforts to understand their main stress sources and then reduce them.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.159-162
• /
• 2009

세계적인 에너지 자원 무기화와 더불어 에너지 효율이 높은 창호개발이 지속적으로 진행되고 있다. 이중 진공패널은 단열성능이 우수하여 건물에서의 에너지 절약 측면에서 미래의 창호소재로 각광 받고 있으나 구조 및 제조공법에 관한 규명이 되어 있지 않다. 진공패널은 대기압 및 외력에 견딜 수 있도록 구조를 형성해야 하며, 이를 위하여 진공간극을 유지하기 위한 지지대를 사용한다. 본 논문에서는 진공패널에서 지지대의 배열에 따른 진공패널의 응력분석과 이 데이터 평가를 통한 허용응력 내에서의 유리지지대 배열방안을 제시하고 시뮬레이션을 통해 그 타당성을 검증하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.133-136
• /
• 2010

공간부족과 해안 매립으로 발생되는 문제점을 해결하기 위하여 초대형부유구조물이 각광 받고 있으며, 대표적인 구조형식으로는 폰톤식과 반잠수식이 있다. 하지만 다양한 환경에 적용하기에는 구조적으로 한계를 가지고 있으며, 이를 극복하기 위해 부유체 하부에 수직으로 결합된 실린더에 공기를 가두어 지지되는 공기안정식 플랫폼이 제안되어졌으나 아직 개념단계에 머무르고 있는 실정이다. 이에 본 연구에서는 공기 안정식 초대형부유구조물의 실린더 내부 공기상태에 따른 안정성을 검토하기 위하여 유체정역학적 관계를 통해 실린더 내부의 공기 복원력 변수를 산정하였으며, 선형파랑하중에 따른 구조물의 응답을 최소화 할 수 있는 변수의 범위를 제시하였다.