• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.1014-1020
• /
• 1995

고온구조물은 고온에서의 운전상태에 따라 복잡한 하중이력을 경험하게 됨으로써 상온에서 발생하는 손상 기구와는 달리 온도 의존성을 가질 뿐만 아니라, 상온에서 볼 수 없는 크립-피로의 상호작용에 의한 손상현상이 나타나게 된다. 따라서 고온 구조물의 건전성 평가를 위한 비탄성 해석을 신뢰성 있게 수행하기 위해서는 구조물의 비선형 거동을 비교적 정확히 예측할 수 있는 통합 구성방정식의 개발 및 적용과 온도에 따른 재료의 물성치 확보가 필수적이다. 본 연구에서는 통합 점소성 모델인 수정된 Chaboche 모델에 대해서 내연적 시간 적분법을 적용하여 ABAQUS의 UMAT으로 구현하였고, 개발된 프로그램을 이용하여 INCONEL 718을 사용한 단순 인장해석, 반복 소성 특성해석 및 크립 해석을 수행하여 프로그램의 신뢰성을 평가하였다. 또한 원공이 있는 평판에 대한 예제해석을 수행함으로써 개발된 프로그램이 고온구조물의 건전성 평가를 위한 비탄성 해석에 적절하게 적용될 수 있음을 확인하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.134-142
• /
• 2012

This paper presents a study of system identification on the tilt response of the L-type retaining wall located at Tanhyun 11th ACE Apartment, Ilsan in order to understand mechanism how the structure behaves in operational conditions and to provide a reference tilt values for assessing structural abnormality. The retaining wall was extraordinarily tall (14m) in urban area so the long-term monitoring system had been installed with 3 tilts-meters and 9 temperature sensors operational from Oct 2004 upto Nov 2007. By using 5-months continuous data in which all the 12 channels were up and running, the two prediction models, 1) the linear model, and 2) the state-space equation (SSE) model, have been identified by finding the best fitness model among all possible 511 combinations of input temperatures out of the 9 temperatures. The linear model which was simple in the model structure achieved the validation fittness of 68% due to the fact that the static model wasn't able to represent thermal dynamics. The SSE model achieved the validation fitness of 90% which was quite accurate considering various unexpected noises happening in field measurements.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.18-22
• /
• 2002

As a single arrival traveltime, maximum energy arrival traveltime has been known as the most proper operator for Kirchhoff migration. In case of the model having the simple structure, both the first arrival traveltime and the maximum energy arrival traveltime can be used as the correct operators for Kirchhoff migration. However for some model having the complex and high velocity contrast structure, the migration using the first arrival traveltime can't give the correct depth section. That is, traveltime to be required in Kirchhoff migration is the maximum energy traveltime, but, needs considerably more calculation time than that of first arrival. In this paper, we propose the method for calculating the traveltime approximated to the maximum energy arrival using one-way wave equation. After defining the WAS(Wrap Around Suppression) factor to be used for calculating the first arrival traveltime using one-way wave equation as the function of lateral grid interval and depth and considering the delay time of source wavelet. we calculate the traveltime approximated to the maximum energy arrival. to verify the validity of this traveltime, we applied this to the migraion for simple structure and complex structure and compared the depth section with that obtained by using the first arrival traveltime.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.110-122
• /
• 1996

본 논문에서는 전기유동유체(Electro-Rheological Fluid : ERF)를 함유하는 지능구조물의 동적 모델링 및 진동제어를 수행하였다. 먼저 실리콘 오일을 기본용매로 하여 조성된 ERF의 복소 전단모듈러스를 전장부하와 가진 주파수의 함수로 동적 회전모드 실험을 통하여 도출한 후, 이를 샌드위치 보 이론과 연계하여 동적 모델링을 실시하였다. 도출된 6차 편미분방정식 형태의 지배 방정식을 유한요소 모델로 이산화하여 전장부하에 따른 지능구조물의 동탄성 특성값인 감쇠 고유 주파수 및 모달 손실계수를 주파수 영역에서 얻었다. 그리고 ERF를 함유한 샌드위치 형태의 지능구조물을 제작한 후 실험적으로 얻은 동탄성 특성값과 모델에 의해 예측된 동탄성 특성값을 비교 고찰하여 제시된 동적 모델에 대한 타당성을 입증하였다. 또한 모델을 통해 전장부하 함수로 예측된 주파수 응답곡선 중에서 각 주파수 대역에 대해 최소 변위가 되는 응답곡선을 요구응답으로 설정한 후, 그에 해당하는 전장부하를 선정하는 논리적인 능동 진동제어 알고리즘을 제안하였다. 제어알고리즘의 유용성을 입증하기 위해 실험적으로 수행된 능동 진동제어 결과를 주파수영역과 시간영역에서 제시하였다.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.167-175
• /
• 2016

This study analyzed empirically the same data through SPSS statistic(regression analysis) and AMOS program(structural equation model) used for cause and effect analysis. The result of empirical analysis was as follows. The different outcome of coefficients and p-values were deducted. Especially, in the mediated effect testing, meanwhile, SPSS statistic(regression analysis) pictured mediated effect, AMOS program(structural equation model) did not picture mediated effect on the reject zone of null hypothesis(absolute t-value and C.R.-value were nearby 1.96). Eventually, this study showed that what program used determined the outcomes of coefficients and p-values(In particular, the outcomes were differentiated further in the increasing measurement error) though using the same data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.43-49
• /
• 2011

In this study, to analyze the collision behaviors of the bridge super-structure and the vessel which the collision point is located far from its rotation center such as bridge of a vessel and equipments on a barge, the simplified collision model was proposed. The model was configured to denote the mass, stiffness and the nonlinear behaviors of the bridge and the vessel. The nonlinear equation of motions of the proposed model were numerically solved by 4th order Runge-Kutta method. The parametric studies were performed for various collision conditions by the standardized Korean barge vessel in term of barge width, and its effects to the maximum collision load of bridge were analyzed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.461-473
• /
• 2000

This paper deals with a numerical model for the time-dependent analysis of steel and concrete composite beams with partial shear connection. A linear partial interaction theory is adopted in formulation of structural slip behavior, and the effect of concrete creep and shrinkage are considered. The proposed model is effective in simulating the slip behavior, combined with concrete creep and shrinkage, of multi-span continuous composite beams. Finally, correlation studies and several parameter studies are conducted with the objective to establish the validity of the proposed model.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.103-105
• /
• 2002

전기-기계 결합시스템에서의 동특성을 정확히 해석하기 위해서는 해석모델의 전기회로 방정식과 운동방정식이 함께 고려되어야 한다. 이때 시스템의 다양한 입력과 기하학적인 구조 등에 대한 등가회로 상수는 시스템의 전반적인 특성에 매우 민감하게 작용하므로 중요하게 고려 되어야한다. 본 논문에서는 전자기시스템의 회로상수를 미리 계산한 다음 이를 기계 역학시스템에 적용하여 다양한 전기적 입력과 외부 부하특성에 대하여 어떻게 동작하는지를 알아보았다. 전자기시스템의 회로상수 추출을 위해 전자장해석은 유한요소법을 이용하였으며 전기회로 방정식과 운동방정식이 함께 고려된 상태 미분방정식은 4차 Runge-Kutta 미분방정식 해법을 이용하여 운동특성을 해석하였다. 계산된 결과는 수학적으로 검증된 미분방정식과 비교하여 검증하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.4
• /
• pp.191-197
• /
• 2018

This paper details the development of an isotropic elastic-damage constitutive model for polymeric foam based on irreversible thermodynamics to consider the growth and coalescence of voids. The constitutive equations describe the material behavior sustaining unilateral damage. To facilitate finite element analysis, the material properties for specific types of polymeric foams are applied to the developed model; the model is then implemented in ABAQUS as a user-defined material subroutine. To validate the developed damage model, the simulated results are compared to the results of a series of tensile tests on various polymeric foams. The proposed damage model can be utilized to further research on continuum damage mechanics and finite element analysis of polymeric foams in computational engineering.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.3
• /
• pp.133-151
• /
• 2007

The purpose of this article is to examine the effects of item parceling on the consistency of significance testing of the causal parameters with regard to the relationship between the relevant constructs, as well as the effects of the item parceling on the goodness-of-fit indices of LISREL's general models. Most of the researchers' major purpose of using structural equation modeling (SEM) is to test their research hypotheses associated with the causal parameters. Therefore, we investigated three general models of LISREL, rather than the frequently used confirmatory factor analytic (CFA) models by many other researchers. The results of the study showed that there was a high level of consistency in the calculated test statics of causal parameters between the item-parceled solutions and the item-level solutions, and that the item-parceled solutions had better goodness-of-fit indices, such as GFI, AGFI, CFI, and NFI, than the solutions at the item level. However, in terms of RMSEA, there was no such tendency.