• 제목/요약/키워드: 구면파

검색결과 37건 처리시간 0.023초

지표면에 의한 음의 초과 감쇠 특성 연구 (A Study on the Characteristics of Excess Attenuation of the Sound due to the Ground)

  • 황철호;정성수
    • 소음진동
    • /
    • 제7권3호
    • /
    • pp.401-409
    • /
    • 1997
  • This study observed the meterological influence on the excess attenuation with various flow resistivities. The flow resistivity is simulated up to 30, 000 cgs rayls. There is no significant differences among results from spherical wave analysis for excess attenuation, from plane wave analysis, and from locally reacting analysis. This is validated only when the flow resistivity is more than 100 cgs rayls. For the determination of effective flow resistivity of ground by measuring the excess attenuation experimentally, it is highly recommended that the distance between source and receiver is about 2.5m, and that the height of them is 0.3-0.4 m in case that they have the same height. Under this proposed conditions, the flow resistivity of 6-month-passed asphalt ground is estimated to 5, 000 cgs rayls by comparing the measured excess attenuation with the calculated.

  • PDF

독립, 비독립 음원이 동시에 존재할 경우 선형 마이크로폰 어레이를 이용한 소음원 탐지 방법 (Indentification of Coherent/Incoherent Noise Sources Using A Microphone Line Array)

  • 김시문;김양한
    • 소음진동
    • /
    • 제6권6호
    • /
    • pp.835-842
    • /
    • 1996
  • To identify the locations and strengths of acoustic sources, one may use a microphone line array. Apparent advantage of the source identification method utilizing a line array is that it requires less measurement points than intensity method and holography. This method is based on the information of magnitude and phase difference between pressure signals at each microphone. Since those differences are dependent on the source model, we have to assume them such as plane, monopole, etc. In this paper the conventional source identification methods such as beamforming method and MUSIC method are briefly reviewed by modeling a source as plane and spherical wave, then a modified method is introduced. This can be applied to sound field which may by either coherent or incoherent. Typical simulations and experiment are performed to confirm this identification method.

  • PDF

독립/비독립 음원의 위치 탐지 방법 (Localization of coherent/incoherent sources-simulation and experiment)

  • 김시문;김양한
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
    • /
    • pp.86-91
    • /
    • 1995
  • 음원의 위치를 찾는 문제에 있어서 비독립 음원들이 존재하는 경우, 근접장에서는 음원으로부터 나오는 파형을 평면파로 가정할 수 없고 구면파로 가정해야 하며, 여러개의 비독립 음원이 존재한다고 가정하여 각각의 음원의 위치를 변화시켜 가면서 MUSIC파워를 계산하여야 한다. 실제 음원의 갯수보다 가정한 음원의 갯수가 작으면 정확한 음원의 위치를 가르키지 못하며 MUSIC 파워 값도 작다. 실제 음원의 갯수와 가정한 음원의 갯수가 같으면 정확한 음원의 위치를 가르치며 MUSIC 파워 값이 크게 얻어진다. 실제 음원의 갯수보다 가정한 음원의 갯수가 큰 경우 실제의 음원의 위치를 포함하여 다른 음원의 위치를 얻을 수 있으나 그 음원의 세기는 무시할 정도로 작다. 즉 실제 음원의 갯수보다 많은 수의 음원을 가정하여 음원을 탐지할 수 있다. 일반 음장 즉 독립 음원과 비독립 음원이 공존하는 경우 실제의 음원의 갯수만큼 가정한다면 음원이 위치를 찾을 수 있다.

  • PDF

위상천이 디지털 홀로그래피를 이용한 3차원 상대 거리 측정 (Three-dimensional relative-distance measurement by use of the phase-shifting digital holography)

  • 김현;이연호
    • 한국광학회지
    • /
    • 제14권2호
    • /
    • pp.200-207
    • /
    • 2003
  • 본 논문에서는 기존의 위상천이 디지털 홀로그래피에서 기준빔으로 사용되는 평면파 대신 보다 일반적인 구면파를 이용하여 3차원 공간상에 위치한 두 물체점들 사이의 상대적인 거리를 측정하는 새로운 시스템 및 알고리듬을 제안한다. 본 논문에서는 이러한 시스템에 대한 모의실험 및 광학실험을 실시하였다. 이러한 시스템에서는 홀로그램 기록에 사용된 기준빔의 정확한 정보를 알고 있지 않더라도 3차원 공간상의 두 물체점들 사이의 상대적인 거리를 정확하게 측정할 수 있다. 본 논문에서는 광학실험을 통하여 약 300 cm 거리에서 서로 0.5 cm 떨어진 두 물체점들 사이의 상대적인 거리를 10% 미만의 오차로 측정하였다.

충격내압을 받는 복합적층 중공구의 수치해 (Numerical Solutions for Thick-Welled Laminated Composite Spheres under Impact Pressure)

  • 오근;심우진
    • 대한기계학회논문집A
    • /
    • 제29권2호
    • /
    • pp.293-302
    • /
    • 2005
  • In this paper, the thick-walled laminated, orthotropic as well as bimaterial, composite hollow spheres under impact pressure are analyzed in detail by using the semi-discrete finite element method with the Houbolt time-integration scheme which results in unconditionally stable transient numerical results. Numerical results are obtained by using the self-constructed spherically symmetric (one-dimensional) and axially symmetric (two-dimensional) finite element programs, and compared with the previous solutions by other researchers, being shown some of which are incorrect. The finite element package Nastran is also adopted for numerical comparison.

초음파 영상 시스템의 Synthetic Focusing을 위한 구면파 발생 방법 (Method Generating Circular Wave for Synthetic Focusing)

  • 오진식;김정준;송태경;안영복
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1998년도 추계학술대회
    • /
    • pp.215-216
    • /
    • 1998
  • The ultrasonic imaging systems using synthetic aperture beamforming has been formed in the way that one element transmits and then receives a pulse. Because the amplitude of a pulse from one element is too small to propagate a long distance, the SNR(Signal to Noise Ratio)is low. This paper proposes the method to make a circular wave almost equal to one generated by one element using several elements. The amplitude of the wave made up of several elements is much larger than that of one element. And we can improve the SNR.

  • PDF

층밀림 간섭계를 이용한 부피간섭계의 개선 (Improvement of the Volumetric Interferometer using a Lateral Shearing Interferometer)

  • 주지영;김승우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.208-211
    • /
    • 2005
  • The volumetric interferometer, which uses the interference of wavefronts emitted from two single mode fibers, measures the target position in 3-D. In this paper, we suggest a new calculation method which doesn't need a non-linear optimization and an initial guess. We find the relationship between the coefficients of the Zernike polynomials for a spherical wavefront and its center and reconstruct a spherical wavefront by using the Zernike polynomials from two interference fringes like a lateral shearing interferometer. The target position can be obtained from the coefficients of the Zernike polynomials of the reconstructed wavefront. We can get the target position in 3-D with $sub-{\mu}m$ errors in a simulation.

  • PDF

발산 순압 로스비-하우어비츠 파동의 안정성 (Stability of the Divergent Barotropic Rossby-Haurwitz Wave)

  • 정한별;정형빈
    • 한국지구과학회지
    • /
    • 제37권2호
    • /
    • pp.107-116
    • /
    • 2016
  • 전구영역 수치모델을 이용하여 순압 로스비-하우어비츠 파동의 안정성을 조사하였다. 본 연구에서 조사한 로스비-하우어비츠 파동은 강체 회전하는 동서 기본류와 유한한 진폭을 가지는 구면조화 파동으로 구성된다. 로스비-하우어비츠 파동은 강체 회전하는 동서 평균류의 강도에 따라 정상 또는 비정상의 구조로 나타난다. 수치 실험을 통해 임의의 다른 두 시간에서 섭동장의 진폭을 비교하여 파동의 안정성뿐만 아니라 성장률을 결정하였다. 로스비-하우어비츠 파동의 불안정 모드는 다양한 동서 파수 성분이 결합된 형태로 나타났다. 파동의 속도가 느린 지역에서 와도 섭동장은 불연속적인 형태를 보이는데, 이는 모델의 수평 해상도와 관계가 없는 것으로 밝혀졌다. 푸리에-유한 요소 모델에서 더 이른 적분 시간에 불안정 모드가 나타났는데, 이는 구면조화 스펙트럴 모델 대비 더 낮은 수치 정확도를 가지기 때문인 것으로 보인다. 모델의 전체적인 정확도를 고려하여, 불안정 모드가 구면 조화 파동을 전체적으로 지배하기 시작하는 시간을 추정하였다.

전파를 이용한 도체 Scale 분석에 Regression Progress 기법 이용 연구 (Regression Progress to Evaluate Metal Scale Thickness using Microwave)

  • 문성진;박위상
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.1-5
    • /
    • 2010
  • 본 논문은 열연 공정을 거친 철강 강판에 형성된 산화철 층, 즉 scale 층의 두께를 유전체 렌즈 안테나를 이용하여 측정하는 방법을 소개하였다. 유전체 렌즈 안테나는 X 밴드 대역에서 주파수에 독립적인 특성을 가지며, 혼 안테나에서 방사되는 구면파를 초점이 형성되는 평면에 평면파를 형성하는 역할을 한다. 이러한 동작원리를 이용하여 철강 강판에 형성된 scale 층에 완전 도체와 유전체로 형성된 two-layer 구조에 직각 입사하는 평면파의 이론적 해석이 적용될 수 있다. Scale의 두께를 도출해 내는 과정에서 유전체 렌즈의 영향을 최소화하기 위한 calibration 과정이 삽입되었으며, 이로 인한 반사 계수 위상의 오차가 발생하였다. 이러한 위상 오차에 의한 scale 두께의 오차를 줄이기 위하여, 수치적으로 regression 방법을 사용하였으며, 기존의 iteration 방법과 비교하여, 주기적으로 얻어지는 두께의 값이 아닌 단일 두께 값을 얻어낼 수 있었다.