• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1598-1603
• /
• 1969

A field expeperiment has been conducted in order to explore possibilities of efficient and economical irrigation methods for the rice cultivation through which irrigation water may be saved and rice paddies may keep water for longer period of time, resulting in an increased yield of rice. Some of the major findings from the experimentation are summarized in the following. 1. There is slightly significant difference among experimental plots in the weight of rice straw. 2. The 9cm-lined plot proves to be the best in terms of the thickness. In this connection, however, it seems to by 3cm. 3. The wheat straw-lined plot is found superior in yield. However, this may be resulted in by the application of more fertilizer, and how long the plot could be durable may be problematic. Since every two or three years the straw-lining work has to be done, more labour may be required of the plot. 4. It would be inappropriate to expect any meaningful experimental results for the first year, since surface soil and deep soil are mixed up in the course of work. There is not observed any meaningful difference in the number of ears per stalk and in the number of grains per ear. However, in the lined plots, the number of tillers is slightly increased. 5. Irrigation has been applied by means of ordinary method after lining. When irrigation is applied at the interval of five to six days, irrigation water is saved by 44.9 per cent in the case of 9cm-lined plot, 39.7 per cent in the case of 6 cm-lined plot, and 36.3 percent in the case of 3 cm-lined plot. 6. An increased yields arenoted in the wheat straw-lined plot by 23.8 per cent, in the 9 cm-lined plot by 20.1 per cent, in the 3 cm-lined plot by 12 per cent. and in the case of vinyl-lined plot by 12.5 per cent. 7. The rate of maturity of grains is proved better, and the husking rate also found better(75%), that is, the quality of rice grains is improved.

• The Korean Journal of Mycology
• /
• v.40 no.1
• /
• pp.19-38
• /
• 2012

This study was conducted to investigate the diversity of higher fungi and relationship between higher fungi and climatic factors in Naejangsan National Park from April 2004 to October 2010. The obtained results from investigation were as follows. The higher fungi were classified into 48 families, 158 genera and 451 species in Basidiomycotina, 13 families, 26 genera and 39 species in Ascomycotina, and 4 families, 7 genera and 7 species in Myxomycetes, and most of them belonged to Hymenomycetidae in Basidiomycotina. Dominant species belonged to Ttricholomataceae (72 species), Russulaceae (39 species), Polyporaceae (41 species), Boletaceae (40 species), Cortinariaceae (35 species) and Amamtaceae (28 species). For the habitat environment, the ectomycorrhizal mushrooms were 38.8% (15 families, 36 genera and 193 species), litter decomposing and wood rotting fungi 39.4% (36 families, 107 genera and 196 species), grounding Fungi 19.9% (24 families, 51 genera and 99 species) and others 1.8% (3 families, 4 genera and 9 species). Monthly, most of higher fungi were found in July, August and September, and least found in November. In climatic conditions, most higher fungi were occurred in $23^{\circ}C$and above of mean temperature, $20^{\circ}C$and above of minimum temperature, and $29^{\circ}C$and above of maximum temperature. most of higher fungi were found in 73% and above of relative humidity and 200 mm and above of monthly precipitation. In case of ectomycorrhizal fungi like Amamtaceae, Boletaceae and Cortinariaceae, significance levels are not high in $32^{\circ}C$ and above of maximum temperature which mostly affects species occurrence than other climatic factors of mean and minimum temperature and monthly precipitation.

• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.403-409
• /
• 1995

Purpose : Authors tried to enhance the safety and accuracy of radiosurgery by verifying stereotacitc target point in actual treatment position prior to irradiation. Materials and Methods : Before the actual treatment, several sections of anthropomorphic head phantom were used to create a condition of unknown coordinates of the target point. A film was sandwitched between the phantom sections and punctured by sharp needle tip. The tip of the needle represented the target point. The head phantom was fixed to the stereotactic ring and CT scan was done with CT localizer attached to the ring. After the CT scanning, the stereotactic coordinates of the target point were determined. The head phantom was secured to accelerator's treatment couch and the movement of laser isocenter to the stereotactic coordinates determined by CT scanning was performed using target positioner. Accelerator's anteroposterior and lateral portal films were taken using angiographic localizers. The stereotactic coordinates determined by analysis of portal films were compared with the stereotactic coordinates previously determined by CT scanning. Following the correction of discrepancy the head phantom was irradiated using a stereotactic technique of several arcs. After the irradiation, the film which was sandwitched between the phantom sections was developed and the degree of coincidence between the center of the radiation distribution with the target point represented by the hole in the film was measured. In the treatment of the actual patients, the way of determining the stereotactic coordinates with CT localizers and angiograuhic localizers was the same as the phantom study. After the correction of the discrepancy between two sets of coordinates, we proceeded to the irradiation of the actual patient. Results : In the phantom study, the agreement between the center of the radiation distribution and the localized target point was very good. By measuring optical density profiles of the sandwitched film along axes that intersected the target point, authors could confirm the discrepancy was 0.3 mm. In the treatment of an actual patient, the discrepancy between the stereotactic coordinates with CT localizers and angiographic localizers was 0.6 mm. Conclusion : By verifying stereotactic target point in actual treatment position prior to irradiation, the accuracy and safety of streotactic radiosurgery procedure were established.

• Korean journal of food and cookery science
• /
• v.14 no.3
• /
• pp.225-231
• /
• 1998

Enzyme-treated glutinous rice flour, which was developed to shorten or skip a steeping process during the preparation of Yukwa, was analyzed for its physicochemical characteristics and compared with glutinous rice flour made by 28-day-steeping method. Total sugar content of the 28-day-steeped flour was the highest among all groups, on the other hand, the reducing sugar content was higher in enzyme-treated glutinous rice flour. The viscosity of enzyme-treated flours was significantly lower than that of the 28-day-steeped and particularly showed the lowest value at 65$^{\circ}C$. The contents of Ca$\^$2+/ and Mg$\^$2+/ in enzyme-treated glutinous rice flours were higher than those of the 28-day-steeped group, however, the content of P$\^$+/ was lower. Free sugar detected in glutinous rice flour prepared from 28-day-steeping method was glucose only, but enzyme-treated flours contained maltose and glucose, and the content of total free sugar was much higher than that of the 28-day-steeped group. In microscopic structure, both 28-day-steeped and enzyme-treated flours showed the particle size decreased and porous surface on some part of the flour granule.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.255-262
• /
• 2002

This experiment was performed to improve the stability of Lactobacillus fermentum YL-3 as a poultry probiotics. The culture conditions that improve acid tolerance of L. fermentum YL-3 were investigated by changing several factors such as medium composition, temperature, anaerobic incubation and culture time. Also, L. fermentum YL-3 was encapsulated with alginate, calcium chloride and chitosan. The stable culture conditions of L. fermentum YL-3 were obtained in anaerobic incubation using MRS media without tween 80 for 20 hour at $42^{\circ}C$. The capsule after treatment with 1% chitosan was formed close membrane by a bridge bond. Immobilization of L. fermentum YL-3 in capsule was observed by confocal laser scanning microscopy, and cell viability was $2.0{\times}10^9\;CFU/g$ above the average. L. fermentum YL-3 capsule after acid treated at pH 2.0 for 3 hour survived about 40%, but those encapsulated with 1% chitosan survived about 65%. Survival rate of capsule stored at room temperature decreased about $2{\sim}3$ log cycle during 3 weeks, but viability of capsule stored at $4^{\circ}C$ during 3 weeks maintained almost $10^8\;CFU/g$ levels.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Asian Journal of Turfgrass Science
• /
• v.22 no.2
• /
• pp.171-178
• /
• 2008

We have found the clusters of tiny spiny puffball-like mushrooms growing gregariously in fairy ring (arcs) rimmed by a zone of darker green grass in the golf courses. Macroscopic as well as microscopic characters were examined for the morphology of fruiting body. Exoperidium is thin and densely spiny with minute fibrillae at early stage. The connivent spines were soft and quite persistent. In age, the fibrillae scrumble away with a powdery coating, which leaves white endoperidium becoming pale brown. It's interior was white and fleshy at first, but turns into an olive-colored dust as the gleba, the spore-producing tissue, develops to maturity and loaded with olive-brown spore mass. Then, distinct apical pore developed on the endoperidium. Rudimentary subgleba(sterile base) was narrow, chambered, delineated from the gleba by a membrane in young material. These characters suggested this fungus is a Vascellum, a member of the family Lycoperdaceae. The shapes of the spores were globose, echinulate, $3{\sim}3.5{\mu}m$ in diameter, thick-walled, and olive brown. Capillitial threads were $8-9{\mu}m$ wide, mostly colorless in KOH solution and thin-walled, which designated as "paracapillitium". This is an another character that distinguishes this mushroom from Lycoperdon spp. The spines developed on exoperidium were characteristically connivent; their apices joined together in a point, leaving a space below, which gives the appearance of vault to each group of usually 5 to 6 fibrillae. Based on the above characters, this fungus is identified as Vascellum curtisii (Berkeley). The characters distinguishable this from Lycoperdon pulcherrimum, and Vascellum pretense are discussed in detail. Control trial was also attempted. Strong vertical raking(SVR) followed by applying 500x detergent solution (Spark, Aekyung Co. Seoul) resulted in excellent control over any other treatments. In this plot, fruiting body was not developed throughout the end of mushroom growing season.

• Korean Journal of Agricultural Science
• /
• v.12 no.1
• /
• pp.101-107
• /
• 1985

Since most farmers breeding livestocks in Korea is depended on imported feeds, the rate of self-supplying feeds is very important for a stable development of farmers. Therefore, it is considered necessary to increase the rate of self-supplying feeds. In this study, performance tests were carried out with barley and forage to find the design's parameters of hammer for a small size hammer mill which can be driven by 3.7-7.5 kW power tiller being used by most farmers. The revolution speed of hammer mill was 3000 rpm, widths of hammer were 20mm, 30mm, 40mm, and the levels of thickness of hammer were 2mm, 4mm and 6mm. Experimental materials used were barley and forage and screen openings for barley was 4.76mm, and 3.18mm for forage. The study results can be summarized as follows; 1. Results of grinding tests showed that particle sizes were 478-774 microns for barley and 350-434 microns for forage. They were decreased according to the increasing thickness and width of hammer. 2. Fineness modulus of grinded materials were 3.07-3.62 for barley and 2.69-2.93 for forage. They were inversely proportional to thickness and width of hammer. 3. The required power for grinding was 3.8-5.0 kW for barley and 0.9-1.4 kW for forage. The thickness of hammer was more important for less power requirement than width of hammer. 4. Grinding performance of a small size hammer mill was 99-170kg/kWh for barley and 11-21 kg/kWh for forage. The thickness of hammer was an important factor for grinding performance, and inversely proportional to grinding performance. For about 3.2 of fineness modulus, 4 mm thickness was the best, and an optimum width of hammer was 30mm for a small size hammer mill.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.7-13
• /
• 1993

This survey was performed to investigate the holding amount of the various kinds of cooking tools of the farm and fishing villages in Chungnam area. The results were as follows: 1. The holding ratio of refrigerators was the highest (97.9%), and that of toasters was the lowest (1.9%) among the electric tools. 2. The holding ratio of gas-ranges was the highest (95.7%) and that of gas oven-ranges was the lowest (1.2%) among 4 kinds of gas tools under investigation. 3. The holding amount of pans was the highest among the cooking tools and that of wicker baskets was very high among the small cooking tools. The holding ratios of egg-cutters and lemon-squeezers were very low (4.1% and 2.9%, respectively). 4. The holding ratios of various kinds of cooking tools were related to the housewife's educational background and family income.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.230-251
• /
• 2017

According to the survey on higher fungi from 2009 to 2011 and also in 2015 in Byeonsanbando National Park, a total of 2 division, 6 class, 18 orders, 61 families, 157 genera and 323 species were observed. In case of Agaricales, there were 23 families, 67 genera and 153 species; Boletales, there were 6 families, 27 genera and 45 species; Russulales, there were 3 family, 4 genera and 40 species; Polyporales, there were 6 family, 21 genera, 28 species. Thus, most of them belonged to the following 4 orders: Agaricales, Russulales, Boletales and Polyporales. Dominant species belonged to Boletaceae (37 species), Russulaceae (36 species), Agaricaceae (28 species) and Amamtaceae (25 species). For the habitat environment, the ectomycorrhizal mushrooms were 40.2% (poisonous mushrooms, 46 species; edible & medicinal mushrooms, 51 species; unknown edible & poisonous mushrooms, 26 species), litter decomposing and wood rotting fungi 35.3%(poisonous mushrooms, 10 species; edible & medicinal mushrooms, 52 species; unknown edible & poisonous mushrooms, 46species), grounding Fungi 22.3%(poisonous mushrooms, 8 species; edible & medicinal mushrooms, 31 species; unknown edible & poisonous mushrooms, 29 species). Monthly, most of poisonous mushrooms, edible & medicinal mushrooms and unknown edible & poisonous mushrooms were found in July and August. In terms of altitude, the most species were observed at 1~99m and the populations dropped by a significant level at an altitude of 200m or higher. It seemed that the most diversified poisonous mushrooms, edible & medicinal mushrooms and unknown edible & poisonous mushrooms occurred at climate conditions with a mean air temperature at $24.0{\sim}25.9^{\circ}C$, the highest air temperature at $28.0{\sim}29.9^{\circ}C$, the lowest air temperature at $20.0{\sim}21.9^{\circ}C$, a relative humidity at 77.0~79.9% and a rainfall of 300.0~499.9mm.