• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.45-54
• /
• 2003

Turbo compressor needs high speed rotation of impeller in structure, high rated gearbox and conventional induction motor. This mechanical system increased the moment of inertia and mechanical friction loss. Resently, the study of turbo compressor applied super high speed motor and drive, removing gearbox made its sire small and mechanical friction loss minimum. This paper describes the implementation of the vector control schemes for a variable-speed 131㎾ PMSM(Permanent Magnet Synchronous Motor) drive in super-high speed application.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.129-134
• /
• 2001

본 논문에서는 자동차 계기판 지시계 구동용 액츄에이터 연구의 일환으로써 소형 2상 스텝모터에 대하여 유한요소 수치해석을 이용한 설계, 해석 및 One Chip을 이용한 유량, 온도, RPM 및 속도 지시계 동시제어용 전용 구동 IC를 설계하였다. 일반적으로 자동차 계기판에 사용되어지고 있는 지시계의 구동원으로 코일형의 액츄에이터를 사용하고 있으나, 동작구간내의 선형성 및 속응성 저하와 구조상 큰 체적으로 인한 공간확대의 문제가 야기되어지고 있다. 따라서, 본 연구에서는 고 에너지 밀도를 갖는 소형의 영구자석과 저 손실 특성을 갖는 정밀 기어부 설계를 통하여 경량. 박형의 PM형 스텝모터를 설계하였으며. 또한 다수 모델 제어용 전용 드라이버 IC 설계 및 제작을 하였다. 실제로 제작한 모델을 대상으로 특성평가를 행하였으며, 이로부터 높은 선형성 및 고정밀도와 저소음 특성을 갖는 자동차 계기판 지시계용 구동원 및 드라이버의 활용 가능성을 확인 할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.537-543
• /
• 2012

In this study, we experimentally investigate a noise mechanism related to the machining accuracy of the reducer in the driving state. We fabricate a planetary reducer and four types of gears for use in the planetary reducer. We use signal analysis to determine the noise and vibration of the reducer at different motor speeds; the motor speed is increased from 0 rpm to the maximum speed in a stepwise manner. In addition, we obtain the sound level by using a sound level meter. The machining accuracy of gears is evaluated by public organizations, Korea Testing Laboratory (KTL), on the basis of the Japanese Industrial Standard (JIS). We analyze and compare the results with the noise and vibration of the reducer.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.237-238
• /
• 2006

Vibration incidents hardly happen when a turbine generator usually installed in LNG carrier is operated, different from diesel engine generator. The purpose of this paper is to introduce an actual vibration incident, which hardly occurred in case of turbine generator, and describe all possible countermeasures to prevent from vibrations during operation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.17-24
• /
• 1999

본 논문에서는 새로운 적응 퍼지 슬라이딩 모드제어 방법을 제시하였다. 제어기는 정확한 수확적인 모델이 없이도 점근적으로 시스템을 안정화시킬 수 있으며 적분항을 포함시킴으로서 정상상태에서의 오차를 좀 더 줄일 수가 있다. 직접구동모터는 감쇄기어가 없어서 부하나 외란 토크의 변화에도 모터 역학에 직접적으로 많은 영향을 줄 수가 있다. 제어기의 실제성능을 확인하기 위하여 불확실한 부하나 변소를 갖는 직접구동모터의 위치제어에 적용하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.380-388
• /
• 2016

Using the magnet gear, it is possible to transmit power without mechanical contact. As the drive shaft in a magnet gear-based speed reducer system is isolated from the drive shaft, the system is a two-inertia resonance system that should cope with an external load with the limited air-gap stiffness. On the other hand, the drive shaft or low-speed side is controlled only by the torque of the drive shaft through an air-gap, and the excessive oscillation or the slip can then be generated because of an abrupt disturbance that is different from the general mechanical gear system. Therefore, the disturbance loaded at the low speed side should be measured or estimated, and considered in the control of the driving shaft. This paper proposes a novel full-state feedback controller with a reduced-order observer for the speed reducer system using a magnet gear with a unified harmonic modulator. The control method was verified by simulation and experiment. To estimate the load at the low speed side, a novel observer was designed, in which the new state variable is introduced and the new state equation is formulated. Using a full-state feedback controller including the observer, the test result against disturbance was compared with two D.O.F PI speed controllers. The pole slip was compensated within relatively a short time, and the simulation result about the estimated variable shows a similar tendency to the test result. The test results showed that the magnet gear-based reducer can be applied to an accurate servo system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.322-323
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.320-321
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.435-436
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.25-26
• /
• 2010