• Explosives and Blasting
• /
• v.40 no.3
• /
• pp.66-76
• /
• 2022

Recently, the demand for the dismantling of old industrial complexes has been increasing, and the construction of restoring the dismantled industries to their original natural environment is underway. In this case, the felling method was applied to the explosive demolition method to dismantle a large steel frame structure in an old industrial complex. We used a charging container to cut the steel frame structure that generates a metal jet. The thickness of the thick steel structure in the blasting section was controlled by gouging which a method of digging deep groove by gas and oxygen flame or arc thermal. As a result of the explosive demolition, the steel frame structure collapsed precisely according to the estimated direction. The explosive demolition was completed without causing any damage to the surrounding facilities.

• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.127-136
• /
• 2012

River is able to change by various environmental factors. In order to conduct river restoration design, it is necessary to evaluate the stable channel through the analysis of past and present river channels. River evaluation requires various data, such as geometry, hydraulic and hydrology, but there is a lot of difficulty to understand topographical information of river change on time and space due to a lack of past data by domestic conditions. This study was analyzed abandoned channel formation, changes in the vertical-section and cross-section length of rivers, and micro-landform changes etc using an image analysis technique. Purpose of this research is to evaluates the stable channel through a river channel morphology change from past and present river channels image. Mangyoung river was conducted artificial river maintenance through straight channel consolidation form 1920 to 1930 year. In the result river maintenance, mangyoung river length was decreased by 15 km and abandoned channels of six points were made. Since then, weir was continuously increased to control bed slope and use water. Install of weir was to be the reason of changes on channel width, thalweg, vegetated bar, sand bar, water area. Present Mangyoung river show that water area was temporary increased in upper and middle reach because of weir installation. Total sand bar was only decreased in upper channel. The change of vegetated bar and sand bar was slight recently. In this result, Mangyoung river is inferred to reach stabilized channel although there is some difference to the lower reach.

• Journal of the Korean Society of Earth Science Education
• /
• v.13 no.1
• /
• pp.74-89
• /
• 2020

The purpose of this study was to develop a concept test tool for seasonal change with reliability and validity, and to objectively observe and analyze sub-concepts and misconceptions related to the concept of seasonal change to explain the relationship between variables. The development process of the conceptual change concept inspection tool consisted of the development of the inspection tool development plan, the development of the inspection tool draft, the modification of the preliminary inspection and inspection tools, the development of the final inspection tool, and the implementation of this inspection. The developed test tool can be used to provide students with appropriate learning and help by examining students' degree of seasonal change concept formation and analyzing the cause of the difficulty in concept formation. As a result of regression analysis of 198 students in 6th grade using the developed test tool, it was found that the understanding of pre-learning concept and correction of misconception had a statistically significant effect on the concept learned in the seasonal change unit, and misconception had greater effect. Correction of misconceptions had a significant effect on students above the average score among the two sections created and cut based on the average score, and on the students below the average score, the understanding of pre-learning concept had a significant effect.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.163-168
• /
• 2011

In this paper, we proposed non-linear gamma curve algorithm for gamma correction. The previous non-linear gamma curve algorithm is generated by the least square polynomial using the Gauss-Jordan inverse matrix. However, the previous algorithm has some weak points. When calculating coefficients using inverse matrix of higher degree, occurred truncation errors. Also, only if input sample points are existed regular interval on 10-bit scale, the least square polynomial is accurately works. To compensate weak-points, we calculated accurate coefficients of polynomial using eigenvalue and orthogonal value of mat11x from singular value decomposition (SVD) and QR decomposition of vandemond matrix. Also, we used input data part segmentation, then we performed polynomial curve fitting and merged curve fitting results. When compared the previous method and proposed method using the mean square error (MSE) and the standard deviation (STD), the proposed segmented polynomial curve fitting is highly accuracy that MSE under the least significant bit (LSB) error range is approximately $10^{-9}$ and STD is about $10^{-5}$.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.138-147
• /
• 2012

For biomass estimation of Phyllostachys pubescens stands by optimal survey method we established 9 bamboo sample plots in the research forests of KFRI (Korea Forest Research Institute). The dry weight of culm segment determined by relative heights of total bamboo height show us two groups of 1st to 5th culm segment (up to 0~55% culm of tree height from the bottom area) and 6th to 8th culm segment (55~100%) by the results of cluster analysis for dry weight ratio. This results show that upper and lower part of 55~70% reference height from the bottom area against total culm height can be used in obtaining 1 kg of a sample bamboo, respectively, rather than 2.0 m stem segments of other forest tree species. In above-ground biomass estimation by $W=aD+bD^2$ having the highest coefficient of determination in this study, above ground stand biomass was 57.77 ton/ha (culm 40.47 ton/ha, branch 9.29 ton/ha, and leaf 8.01 ton/ha) of which 70% was contributed by culm component followed by branch (16%) and leaf (14%). Below-ground biomass was 53.35 ton/ha in total.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.933-938
• /
• 2005

To investigate pertinent packaging treatment of fresh-cut potatoes (Solanum tuberosum L.), potato cubes were subjected to passive, gas exchange, and vacuum packaging conditions. Low density polyethylene film (LDPE), polypropylene film (PP), anti-fogging film (AP), and perforated film (PF) were used as passive packaging treatments. Mixed gases of 5% $CO_2/5%\;O_2$ (MA1) and 10% $CO_2/5%\;O_2$ (MA2) were applied as gas exchange packaging. Packs filled with cubes were kept at $5^{\circ}C$, and changes in weight loss, surface color, vitamin C content and sensory quality of cubes were analyzed during storage. Respiration rate of cubes was 2.11 times higher than that of intact raw potatoes at $5^{\circ}C$. Gas concentrations in passive packaging was maintained at 1-2% $O_2$ and 4-14% $CO_2$ after 7 days. Gas levels changed depending on films used. Cubes packed in PP and MA2 showed lowest weight loss and browning during storage. Firmness of cubes was not affected by packaging treatment. Vitamin C content was highest in cubes packed with AF. Cubes packed in MA2 showed highest quality upto 10days storage, followed by those packed in PP and AF.

• Journal of Aquaculture
• /
• v.13 no.3
• /
• pp.253-258
• /
• 2000

Monthly samplings were made at Yongho-dong, Pusan, on the south eastern coast of Korea from May 1998 to April 1999 to investigate population growth and regeneration pattern of C. okanurae. The growth of erect branches was dependent mainly on the habitat water temperature. Maximum length of an erect branch was 13.4 cm in July and the minimum was 5.1 cm in March; during the corresponding months maximum and minimum weights of the alga were 2.2 and 0.7 g, respectively. During this investigation, gametangia did not occur. Regeneration of excised ramuli was dependent on irradiance. Regeneration rate was the highest under 50 ${\mu}$molm$^{-2}$s$^{-1}$ at 2$0^{\circ}C$. Under the conditions of different combinations of temperature (18, 22, 25, 28 and 1$^{\circ}C$) and irradiance (10, 20, 40, 60 and 100 ${\mu}$molm$^{-2}s$ $^{-1}$) regimes, regeneration of excised erect branch was highly affected by temperature and irradiance. The highest regeneration occurred at 25 $^{\circ}C$ and 20 ${\mu}$molm$^{-2}s$$^{-1}$, whereas the highest growth in length (4.5${\pm}$1.0 cm) and fresh weight (1.2${\pm}$0.7 g) was attained after 15 days of culture.

• The Korean Journal of Pesticide Science
• /
• v.19 no.4
• /
• pp.440-449
• /
• 2015

Pine wood nematode (PWN), Bursaphelenchus xylophilus is one of the most serious pests of pine tree. Trunk injection of some nematicides in tree is well known as an effective control method. However there are some limitating factors which hindering the efficacy of trunk injection in field or potted tree. In this study we suggested easy and useful alternative screening methods of nematicides against PWN. Reproduction of PWN was influenced by tree twig moisture (high reproduction in high moisture trig) and paraffin coating was 78.6% reduced moisture loss in tested twig. There were no reproduction different in up and down site from infection site of twig at 1 month after inoculation of PWN and also distance (5 and 10 cm) from inoculation site of PWN did not influence the reproduction of PWN. Numbers of reproduced PWN were higher with decreasing diameter of twig. Numbers of reproduced PWN were similar to P. thunbergii and P. densiflora. However reproduction was increased depending on high inoculation density and longer propagation period. When inoculation of PWN on cut twig injected with emamectin benzoate 2.15% EC and morantel tartrate 8% SL in trunk of Pinus thunbergii in the field, PWN number were significantly reduced than untreated control. We suggest this screening method for PWN control agents.

• Journal of Animal Science and Technology
• /
• v.44 no.1
• /
• pp.113-122
• /
• 2002

Beef loins that retailed in market were used as experimental samples. Some beef samples in raw state were packaged with PVDC as aerobic and vacuum condition. The other beef samples were cooked until core temperature arrived at 70$^{\circ}C$ and then packaged immediately in the same way of raw samples. After these samples were irradiated by electron beam 6kGy, irradiated samples were stored in refrigerator(2～4$^{\circ}C$). Identify and quantity of cholesterol oxides were analysed stored at 0 and 7 days, respectively. During the early stage of storage, 7$\beta$-hydroxycholesterol and 7-ketocholesterol were respectively produced from the raw meat samples, and the production of these chemicals were significantly higher (P$<$0.05) from the meats with aerobic packaging than those with vacuum packaging. With the passage of storage time, 7$\alpha$-hydroxycholesterol, 20$\alpha$-hydroxycholesterol, $\beta$-epoxide, $\beta$-epoxide and some other chemicals, which were not produced during the early stage of storage, were produced, Also, the production of these chemicals were significantly increased (P$<$0.05) with the passage of storage time. Cooked meat after irradiation and irradiated meat after cooking produced cholesterol on the 7th day of storage, although this chemical was not produced during the early stage of storage. Production of cholesterol oxides was significantly increased (P$<$0.05) with the passage of storage time for all treatments, and showed significantly lower value (P$<$0.05) with the vacuum packaging than aerobic packaging. Summarizing the aforementioned results, it was found that the production of cholesterol oxides was more easily affected by packaging condition than irradiation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.460-464
• /
• 2002

Quality of noodle processed by addition of hot water extract powder from roasted safflower seed (RSHE) was investigated. Proximate compositions of RSHE was 4.70% of moisture, 32.63% of crude Protein, 6.52% of crude fat, 15.62% of crude ash and 40.53% of carbohydrate. There was no significant difference (p<0.05) in hunter's color value between noodles with and without RSHE. The ‘L’vague of noodle processed by addition of powder from roasted safflower seed (RSP) was very low and significantly different (p<0.05) from other products. With the increase of RSHE addition, the volume and weight of cooked noodles increased (R$^2$=0.9688). The breaking force of dry noodle decreased with the increase of RSHE addition. In the mastication test of cooked noodles, max. weight, strength and hardness increased with the increase of RSHE addition. Dry noodle with 0.3% and 0.5% RSHE recorded high rank, but that with RSP recorded the lowest rank in score of appearance and color by sensory evaluation. The noodle processed with 0.3∼0.5% RSHE showed high sensory quality.