• Reproductive and Developmental Biology
• /
• v.28 no.3
• /
• pp.173-179
• /
• 2004

This study was conducted to investigate the toxi-cological effects of different vitrification solution on development of immature porcine oocytes in vitro. Oocytes were exposed to EFS solution [40% ethylene glycol (EG) + 18% Ficoll + 0.3M sucrose], ES solution (5.5M EG + 1.0M sucrose) or GE solution [10% glycol (G) + 20% EG], and these oocytes were transferred to sucrose solution directly. Maturation rates were significantly (P<0.05) higher in the ES solution (44.5%) and control (57.6%) than in the EFS solution (38.8%) and GE solution (22.4%). No differences among three solution were found in fertilization rates. Cleavage rates was significantly (P<0.05) higher in the ES solution (47.1%) and control (65.9%) than in the EFS solution (21.9%) and GE solution (19.0%), but no difference among three solutions was found in the blastocyst formation rates. These results indicate that combination of EG and sucrose solutions had effects on development of immature porcine oocytes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.42-48
• /
• 2002

In broadband wireless networks, the effective meeting of the QoS guarantees may strongly depend on the Contention Resolution Algorithm used in the uplink contention period. The time it takes a station to transmit a successful request to the base station, or request delay, must be kept low even during periods of high contention. If a request suffers many collisions, it cannot rely on the preemptive scheduler to receive low access delays. However, the conventional collision resolution algorithm has a problem that all collided stations are treated equally regardless of their delay from previous contention periods. Some requests may have very long request delay caused by continuous collisions. In this paper, we propose an adaptive collision resolution algorithm for fast random access in broadband wireless networks. The design goal is to provide quick access to the request with a high number of collisions. To do this, the proposed algorithm separates the whole contention region into multiple sub regions and permits access through each sub region only to the requests with equal number of collisions. The sub region is adaptively created according to the feedback information of previous random access. By simulation, the proposed algorithm can improve the performance in terms of throughput, random delay and complementary distribution of random delay by its ability to isolate higher priorities from lower ones. We can notice the algorithm provides efficiency and random access delay in random access environment.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.480-492
• /
• 2013

After the introduction of geothermal power generation technology based on engineering reservoir creation that can be applied on non-volcanic region, industrial need for studies on the efficient and economic execution of costly deep-depth drilling work becomes manifest increasingly. However, since it is very difficult to predict duration and cost of boring work with acceptable reliability because of many uncertain events during the execution, efficient and organized work management for drilling is not easily achievable. Especially, the round trip that discretely occurs because of the abrasion of bit takes more time as the depth goes deeper and it has a great impact on the work performance. Therefore, a technology that can simulate the occurrence timing and depth of round trip in advance and therefore optimize them is essentially required. This study divided the abrasion state of bit into eight steps for simulation cases and developed a forecast algorithm, i.e., TOSA which can analyze the depth and timing of round trip occurrence. A methodology that can divide a unit section for simulation has been suggested; while the Bourgoyne and Young model has been used for the forecast of drilling rates and bit abrasion extent by section. Lastly, the designed algorithm has been systemized for the convenience of the user.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.214-225
• /
• 2020

Uniaxial compressive strength (UCS) of rock is one of the important factors to determine the advance speed during shield TBM tunnel excavation. UCS can be obtained through the Geotechnical Data Report (GDR), and it is difficult to measure UCS for all tunneling alignment. Therefore, the purpose of this study is to predict UCS by utilizing TBM machine driving data and machine learning technique. Several machine learning techniques were compared to predict UCS, and it was confirmed the stacking model has the most successful prediction performance. TBM machine data and UCS used in the analysis were obtained from the excavation of rock strata with slurry shield TBMs. The data were divided into 8:2 for training and test and pre-processed including feature selection, scaling, and outlier removal. After completing the hyper-parameter tuning, the stacking model was evaluated with the root-mean-square error (RMSE) and the determination coefficient (R²), and it was found to be 5.556 and 0.943, respectively. Based on the results, the sacking models are considered useful in predicting rock strength with TBM excavation data.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.95-104
• /
• 2005

Using TSI, TSIm and LTSI, we compared physico-chemical water quality and trophic state of 5 stations in Lake Andong from June 2002 to June 2003 and examined the correlation of them. It is difficult to evaluate trophic state of waters by each parameter, TP, Chl-a and SD, because TSI and TSIm in each section show different results, oligo-, meso- and eutrophic state. But three methods, TSI, TSIm and LTSI, show the same result that trophic degree lows as it goes to a lower area of the lake. The correlation among them is closer in the upper shallow waters than in the lower deep waters. The reciprocal application of trophic state indices is possible because the coefficient of mean correlation ranges 0.9117 to 0.9909. In conclusion, it seems that LTSI reflects a characteristic of water quality in each section better than TSI, TSIm and is very effective to simplify trophic state evaluation and minimize researcher's subjectivity.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.591-598
• /
• 2020

The all revision of the Road Name Address Act, which contains the contents to be used by expanding the road name address as a means of indicationg the location, has been resloved by the National Assembly. Addresses will be assigned to large-sized facilities (3D mixed-use complex spaces). Here, the 3D (Three-dimensional) address is assigned an indoor path section in the inner passage, dividing the section at intervals. The 3D address will be built on the address information map. For 3D address, data should be built and managed for a 3D complex space(indoor space). Therefore, in this study, the object of the 3D address is defined based on the address conceptual model defined in the international standard, and the 3D address data model is proposed based on IndoorGML. To this, it is proposed as a method of mapping the Core and Navigation module of IndoorGML so that the entity of the 3D address can be expressed in IndoorGML. This study has a limitation in designing a 3D address data model only, but it is meaningful that it suggested a standard for constructing 3D address data in the future.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2835-2844
• /
• 1998

Most data parallel languages provide the block-cyclic distribution (cyclic(k)) that is one of the most general regular distributions. In order to generate local addresses for an array section A(l:h:s) with block-cyclic distribution, efficient compiling methods or run-time methods are required. In this paper, two local address generation methods for the block-cyclic distribution are presented. One is a simple scan method that is modified from the virtual-block scheme. The other is a linear-time ${\Delta}M$ table that contains the local memory access information construction method. This method is simpler than other algorithms for generating a ${\Delta}M$ table. Experimental results show that a simple that a simple scan method has poor performance but a linear-time ${\Delta}M$ table generation method is faster than other algorithms in ${\Delta}M$ table generation time and access time for 10,000 array elements.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.247-261
• /
• 2014

In this study, it investigates the highly controversial issue "low carbon car subsidy". Through the policy's intent, purpose, and necessity, it aims to present alternatives for automotive industry development. Introducing the low carbon car subsidy will bring a huge change to the vehicle purchase practices by changing vehicle purchase cost. It expects that this change will reduce greenhouse gas emission from vehicles. For successful settlement of the system, it shall set up the target sections for subsidy and levy appropriately in order to get the nation's consensus. Additionally, it has to conduct sufficient reviews the measures such as adjustment to the existing auto tax, divided payments of burden charge, etc before enforcing the system. In terms of the automobile industry, it must do their level best in technical development in order to meet the carbon dioxide emission level of imported cars until the enforcement. Also, the government has to strengthen its support to the industry.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.2
• /
• pp.181-188
• /
• 1993

In this study, a numerical method for the material nonlinear analysis of reinforced concrete shell structures including the time dependent effects due to creep and shrinkage is developed. Degenerate shell elements with the layered approach are used. The perfect or strain hardening plasticity model in compression and the linearly elastic model in tension until cracking for concrete are employed. The reinforcing bars are considered as a steel layer of equivalent thickness. Each :steel layer has an uniaxial behaviour resisting only the axial force in the bar direction. A bilinear idealization is adopted to model elasto-plastic stress-strain relationships. For the nonlinear anaysis, incremental load method combined with unbalanced load iterations for each load increment is used. To include time dependent effects of concrete, time domain is divided into several time steps which may have different length. Some numerical examples are presented to study the validity and applicability of the present method. The results are compared with experimental and numerical results obtained by other investigator.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.1-8
• /
• 2016

PURPOSES : This study evaluates the reliability of the patterns of changes in the road surface temperature during winter using a statistical technique. In addition, a flexible road segmentation method is developed based on the collected road surface temperature data. METHODS : To collect and analyze the data, a thermal mapping system that could be attached to a survey vehicle along with various other sensors was employed. We first selected the test route based on the date and the weather and topographical conditions, since these factors affect the patterns of changes in the road surface temperature. Each route was surveyed a total of 10 times on a round-trip basis at the same times (5 AM to 6 AM). A correlation analysis was performed to identify whether the weather conditions reported for the survey dates were consistent with the actual conditions. In addition, we developed a method for dividing the road into sections based on the consecutive changes in the road surface temperature for use in future applications. Specifically, in this method, the road surface temperature data collected using the thermal mapping system was compared continuously with the average values for the various road sections, and the road was divided into sections based on the temperature. RESULTS : The results showed that the comparison of the reported and actual weather conditions and the standard deviation in the observed road surface temperatures could produce a good indicator of the reliability of the patterns of the changes in the road surface temperature. CONCLUSIONS : This research shows how road surface temperature data can be evaluated using a statistical technique. It also confirms that roads should be segmented based on the changes in the temperature and not using a uniform segmentation method.