• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.7-16
• /
• 2004

The homogeneous road section is defined as one consisted of similar traffic characteristics focused on demand and supply. The criteria, in the aspect of demand, are the diverging rate and the ratio of green time to cycle time at signalized intersection, and distance between the signalized intersections. The criteria, in that or supply, are the traffic patterns such as traffic volume and its speed. In this study, the effective method to generate valuable data, pointing out the problems of removal method of obscure data, is proposed using data collected from Gonjiam IC to Jangji IC on the national highway No.3. Travel times are collected with licence matching method and traffic volume and speed are collected from detectors. Futhermore, the method of selecting homogeneous road section is proposed considering demand and supply aspect simultaneously. This method using outlier filtering algorithm can be applied to generate the travel time forecasting model and to revise the obscured of missing data transmitting from detectors. The point and link data collected at the same time on the rational highway can be used as a basis predicting the travel time and revising the obscured data in the future.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.527-528
• /
• 2011

송전선로에서 발생하는 고장의 대부분은 낙뢰에 의한 상-대지간 섬락이나 외물접촉, 혹은 애자련의 오손에 의한 절연파괴 등이 대부분이다. 그리고 대분의 고장은 큰 고장전류를 흘리게 되어 보호계전기가 동작하여 고장구간을 신속하게 분리하게 된다. 그러나, 본 고장사례는 매우 희귀한 고장 사례로서, 고저항 아크 지락에 의하여 발생하는 과도회복전압(TRV: Transient Recovery Voltage)이 애자련에 섬락을 일으킨 경우이다. 본 연구에서는 EMTP (Electro-Magnetic Transient Program)를 이용하여 고저항 지락시 아크의 단속에 의하여 과도회복전압이 발생할 가능성이 있음을 보였으며, 고장기록장치(Fault Recorder)에 나타난 파형 기록과의 유사성을 확인하였다. 또한, 고저항 지락에 의하여 직류분이 초기에 방전됨으로써 고장전류 파형에 직류분 오프셋이 나타나지 않게 됨을 밝혔다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.501-502
• /
• 2018

본 논문은 건설CALS시스템에 20년간 축적된 데이터를 활용하기 위해서 2018년부터 2020년까지 개발 예정인 과적단속 최적 위치 시기 예측 서비스, 비탈면 붕괴 위험도예측서비스, 도로점용(연결) 허가 가능구간 예측 서비스, 보상비 예측 서비스 등 4종의 건설CALS 빅데이터 서비스 기술 개발을 위한 현황분석을 기술하였다. 개발된 서비스는 2020년에 국토교통부 소속기관인 지방국토관리청과 국토관리사무소의 업무담당자 및 국민에게 시범 적용하여 빅데이터 서비스의 효과를 검증하고, 단계적으로 국토교통부 도로관리 업무에 적용할 계획이다.

• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.88-97
• /
• 2007

A point based speed enforcement system(SES) has been widely used in roadways to reduce the operating speeds and potential traffic accidents. Recently, the needs for introudcing new SES using point-to-point speed measurement was presented, however, no practical guidelines or justification of the system was available. This study investigated the effectiveness of the current SES and introduction of the new SES through user interview survey method. Survey results showed that 33% of respondents were unsatisfactory to the current way of SES operation, which was 11% higher than satisfactory respondents, and about 70% of the respondents supported the introduction of point-to-point based SES operation. A majority of respondents preferred the straight roadway segment, bridge and tunnel, and curved roadway segment for a start application site with the segment length of 1-5 km long. Using these survey results, an introduction scheme was discussed in terms of legal bases, installation criteria, and operational guidelines.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.435-436
• /
• 2023

공유 전동킥보드는 현존 대중교통을 이용하기에 애매한 짧은 구간이나 단거리 이동에 적합하고, 특정 노선과 정류장이 정해져 있지 않아 기동성이 높고 자유로워 이용률이 매년 증가하고 있다. 하지만 늘어난 사용자만큼 사건·사고도 늘어나고 있다. 킥보드 전담 부서가 없어 단속의 미흡으로 인해 대중교통이 운행하지 않는 심야에 음주 상태에서 운전하여 사고가 나는 경우가 부지기수이다. 본 프로젝트는 사회적 문제로 대두되고 있는 전동킥보드 음주운전 사고를 방지하고자 아두이노 센서를 기반으로 한 알코올 농도측정으로 음주자의 대여를 사전에 차단하기 위한 기능을 포함하고 있는 애플리케이션이다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.42-52
• /
• 2017

This was a study on the ultimate effect and characteristics of introducing a roundabout through a review of literature on the subject of roundabout. In order to examine an effect produced when roundabout is substituted for ordinary signal-controlled intersection operated at Daego Five-way Intersection and Seongmo Five-way Intersection located in Junggu, Daejeon Metropolitan City, site to be studied, the produced effect was analyzed through comparison between before and after introducing roundabouts in series at Daego Five-way Intersection and Seongmo Five-way Intersection by using microscopic traffic simulation program VISSIM widely used for analyzing an effect of roundabout based on a survey of geometric structure, traffic volume and signal interval on the site. As mentioned above, when Daego Five-way Intersection and Seongmo Five-way Intersection was changed to roundabout, a positive effect was produced on average speed and delay time in comparison with the existing status. It is possible to expect that roundabout can be more efficiently operated when 2 places on the site are changed to double roundabout than when separately changed to roundabouts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.231-238
• /
• 2023

Since there is a limit to the physically visible horizon that sensors for autonomous driving can perceive, complementary utilization of digital map data such as a Local Dynamic Map (LDM) along the probable route of an Autonomous Vehicle (AV) is proposed for safe and efficient driving. Although the amount of digital map data may be insignificant compared to the amount of information collected from the sensors of an AV, efficient management of map data is inevitable for the efficient information processing of AVs. The objective of this study is to analyze the efficiency of information use and information processing time of AV according to the expansion of the active section of LDM-based static road and traffic information. To carry out this objective, a microscopic simulator model, VISSIM and VISSIM COM, was employed, and an area of about 9 km × 13 km was selected in the Busan Metropolitan Area, which includes heterogeneous traffic flows (i.e., uninterrupted and interrupted flows) as well as various road geometries. In addition, the LDM information used in AVs refers to the real high-definition map (HDM) built on the basis of ISO 22726-1. As a result of the analysis, as the electronic horizon area increases, while short links are intensively recognized on interrupted urban roads and the sum of link lengths increases as well, the number of recognized links is relatively small on uninterrupted traffic road but the sum of link lengths is large due to a small number of long links. Therefore, this study showed that an efficient range of electronic horizon for HDM data collection, processing, and management are set as 600 m on interrupted urban roads considering the 12 links corresponding to three downstream intersections and 700 m on uninterrupted traffic road associated with the 10 km sum of link lengths, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.95-107
• /
• 2016

The axle weight of a vehicle in motion can be measured with a low-speed or high-speed weigh-in-motion (WIM). However, the axial load dynamically change depending on the vehicle's characteristics-such as the chassis or axle structure-or the characteristics of the driving environment such as road flatness. The changes in dynamic load lead to differences between the vehicle's weight measured at rest and the vehicle's weight measured in motion. For this Study, an experiment was conducted with an instrumented vehicle to analyze the range of errors caused by uncontrollable environmental factors by identifying the characteristics of the dynamic load changes of a vehicle in motion, and determine the appropriate scale for the accuracy evaluation of a high-speed WIM, as a preparatory research for the introduction of unmanned overweight enforcement systems in the future. The key findings from the experiment are summarized as follows. First, The gross weight of the tested vehicle changed by approximately 1% at low velocities and approximately by 4% at high velocities, and the vehicle's axle weight changed by approximately 1-3%, at low velocities and by 2-9% at high velocities. A single axle showed larger weight changes than individual axles in a group. Secondly, The vehicle's gross weight and the axle weight on the impact section were up to eight times and three-to-twelve times higher, respectively, than its gross weight and the axle weight on the flat section. The vibration frequency of the vehicle's dynamic load was measured at between 2.4 and 5.8Hz, and found to return to the normal amplitude after moving approximately 30 meters.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.6
• /
• pp.47-55
• /
• 2003

In this paper, we propose a new approach to detect peculiar features of license plates using intensity vector and composite color component in order to extract license plates from parking regulation images, which is captured in various locations around the front or the rear of cars at various times and places, and in which complex background is included. We fundamentally use both features that intensity value repeats frequently increasing and decreasing because intensity is obviously different at numerics and background, and that color is uniform in the area of license plates. First, we search each row at regular intervals starting from the bottom of a license-plate image, and we set up a rough region for a certain zone in which tile sign of intensity vector changes frequently enough and color of license plate is detected enough, assuming it as a candidate location of a license plate. And then, we extract an elaborate area of a license plate by projecting vertical edges horizontally and vertically. Here, type of cars, such as the urinate and the public, is easily classified according to the color of extracted plates. We used 200 actual regulation images, which are captured at various times and places, to evaluate the performance of the proposed method. As a result, the proposed method showed extraction rate of 96%, which is 9% higher than the previous method using only intensity vector.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.359-369
• /
• 2013

In this paper, correlations between driving parameters and $CO_2$ of light-duty vehicles have been analyzed. Three test vehicles equipped with PEMS (Portable Emission Measurement System) have been driven in real-road in urban areas of Seoul. Averaged vehicle speed, RPA(Relative Positive Acceleration) and stop ratio have been selected as main driving parameters. The analysis have been conducted in interrupted and uninterrupted road types. Averaged values in various driving conditions have been calculated with distance based moving averaging window method. The multiple linear regression method have been applied to account for correlation between driving parameters and $CO_2$ emissions. This approach has shown statistically that $CO_2$ emission per distance (g/km) have tendencies to be increased as decreased averaged vehicle speed and increased RPA and stop ratio. Compared with uninterrupted traffic, interrupted traffic have shown the lower vehicle speed and the higher RPA and stop ratio. These characteristics of driving parameters in interrupted traffic should cause the higher $CO_2$ emission per distance.