• Proceedings of the Korean Magnestics Society Conference
• /
• 2012.11a
• /
• pp.146-148
• /
• 2012

미크론 자성비드 검출용 바이오센서에 활용하는 GMR-SV 박막을 이온빔 스퍼터링 증착법으로 glass/Ta(5.8 nm)/NiFe(5 nm)/Cu(t nm)/NiFe(3 nm)/FeMn(12 nm)/Ta(5.8 nm)의 구조를 갖도록 증착하였다. 비자성체 Cu의 두께가 3.0 nm에서 2.2 nm까지 얇아질수록 교환결합력은 증가하였으며 자기저항비는 다소 낮았다. 비자성체의 두께가 얇으면 반강자성체의 층간 교환작용이 강자성체의 고정층 뿐만 아니라 자유층의 스핀배열에도 영향을 주고 있음을 확인할 수 있었다. 또한 리소그래피 공정 과정을 거쳐 GMR-SV 소자를 제작하여 미트론 자기비드를 검출하였다. 여기서 자기비드를 떨어뜨리기 전과 후의 자기저항비, 교환결합력, 보자력은 각각 0.9%, 3 Oe, 2 Oe의 값을 나타내었다. 이것으로 미크론단위의 바이오센서로서 활용할 수 있는 가능성을 보여주었다.

• Journal of Korea Fair Competition Federation
• /
• no.99
• /
• pp.2-15
• /
• 2003

기업결합심사는 경쟁당국의 여러 업무 가운데에서도 경쟁당국의 전문성을 가장 잘 나타낼 수 있는 분야라고 할 수 있다. 따라서 기업결합 심사결과에 대한 순응성 및 신뢰성을 높이기 위해서는 관련규정의 객관성 및 국제적 보편성 확보는 물론 기업결합심사의 전문성을 제고시킬 필요가 있다. 이를 위해 관련 제도의 계속적인 보완, 발전을 위해 노력하여야 함은 물론 기업결합 심사능력의 제고와 함께 관련조직의 확대 개편 및 전문능력을 가진 인력 확충이 필요하다. 지금과 같이 경쟁법의 역외적용 및 경제분석 위주의 입체적 심사방식이 주류인 국제적 추세에도 잘 대응하는 것이 필요하다. 이를 위해 외국 심사당국과의 미팅, 인력 및 정보교환 등을 통한 교류나 접촉도 필요할 것이다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.221-221
• /
• 2003

본 연구에서는 스핀밸브 다층박막에서 교환 바이어스에 영향을 끼치는 요인 중 하나인 강자성층과 반강자성층사이의 접합 계면에서의 표면 거칠기 [1,2]를 줄이기 위해 현재 반도체 공정에 사용되고 있는 이온빔 에칭 장비를 사용하여 스핀 밸브 다층박막의 씨앗층 에칭에 따른 교환 바이어스를 알아보고자 하였다. 스핀밸브 구조는 강자성층/비자성층/강자성층의 기본구조를 갖는데 이중 하나의 강자성층의 스핀방향이 반강자성층에 의해 고정되는 구조[3]로써 이러한 고정 효과를 교환 바이어스(exchange bias)라 부른다. 교환 바이어스(exchange bias)현상은 강자성과 반강자성의 접합계면에서 강한 상호 교환결합력에 의해 나타나는 현상으로 이러한 교환 바이어스 특성은 하드드라이브의 고밀도 자기헤드소자 및 비휘발성 자기 메모리소자에 응용되어 기존의 자기저항 소자의 특성을 크게 향상시킬 수 있게 되었다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.04a
• /
• pp.130-131
• /
• 2001

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.486-492
• /
• 1999

The purpose of this research was to find out what is the dominant factor determining the $H_{ex}$ and the $H_C$ of Mn-Ir/Ni-Fe multilayers with different buffer layers. Regardless of (111) texture of Mn-Ir layer, all samples showed over the $H_{ex}$ of 155 Oe. We found out the $H_{ex}$ and the $H_C$ of Mn-Ir/Ni-Fe multilayers depend on interface morphology and grain size of Mn-Ir layer at the interface between Mn-Ir and Ni-Fe layers. The dependence of magnetroesistance ratio and coupling field on the thickness of ferromagnetic layer, thickness of Cu layer and different buffer layers have been studied. Maximum magnetoresistance ratio appeared for the sample Ta(5 nm)/Mn-Ir(10 nm)/Ni-Fe(7.5 nm)/Cu(2 nm)/Ni-Fe(6 nm)/Ta(5 nm)/Si. Magnetoresistance ratio may be related to grain of ferromagnetic layer. Coupling field may be related to the roughness and the grain size of ferromagnetic layer in the spin-valve multilayers.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.62-69
• /
• 2016

In this study, sulfonated poly(ether ether ketone) (SPEEK) as cation exchange membrane and blended and crosslinked poly(vinyl amine) (PVAm) with poly(vinyl alcohol) (PVA) membrane as anion exchange membrane were used and then the performance experiments of the membrane capacitive deionization (MCDI) installed with both membranes were carried out. The newly prepared anion exchange membrane were characterized through water content, ion exchange capacity and FT-IR. The crosslinking time of 3 h to 5 h indicated that the salt removal was reduced from 81.3, 65.7% to 53.8%. The effect of PVAm contents from 40, 60, to 80% on the salt removal was shown 81.3, 75.2 and 37.7%, respectively. As a result, it was concluded that the crosslinking time and the content of PVAm had an influence on the salt removal efficiency.

• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.293-297
• /
• 1993

Exchange coupled $NiFe/TbCo/Sio_{2}$ thin films for magnetoresistive heads were sputter deposited using RF diode sputtering method, and their magnetic characteristics were measured. TbCo films were deposited using a composite target, which is composed of Tb chips epoxied on a Co target. NiFe($400\AA$)/TbCo($1500\AA$)/$SiO_{2}$($500\AA$) films were deposited using a TbCo target having 30 % of Tb area ratio, which showed 25 Oe of the exchange field without substrate bias and 12 Oe with -55 V of substrate bias. The effective in-plane coercivities of the three layer films fabricated with less than -55 V of substrate bias were approximately proportional to the perpendicular coercivities of the TbCo layer only. The films fabricated with a Theo target of 28 % area ratio showed the same trend. However, the exchange field decreased to 4 Oe without the substrate bias and 7 Oe with -55 V of substrate bias. In the films fabricated with 1000 W of power and the target of 36 % area ratio exhibited 100 Oe of exchange field and 3 Oe of coercivity. As the thickness of NiFe layer increased, the exchange field decreased.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.326-331
• /
• 2018

Crosslinking of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) anion exchange membranes, which can be used for capacitive deionization (CDI), was investigated. PPO Anion exchange polymer was prepared through bromination and amination reaction steps and crosslinked with bisphenol A diglycidylether (BADGE), m-phenylenediamine (m-PDA), and hexamethylenediamine (HMDA). The gelation time by crosslinking was short in the order of HMDA > m-PDA > BADGE. The anion exchange membranes crosslinked at room temperature over a certain amount of crosslinking agent did not dissolve in an aprotic solvent such as 1-methylpyrrolidone (NMP) and the chemical durability of their membranes to organic solvent increased. The ion exchange capacity and water uptake of anion exchange membranes crosslinked with different crosslinker (BADGE) contents were measured and compared. The CDI performance of the crosslinked PPO anion exchange membrane immersed in the HMDA solution was almost the same as that of the non - crosslinked membrane except for the initial stage of the adsorption step.

• Journal of the Korean Magnetics Society
• /
• v.13 no.2
• /
• pp.53-58
• /
• 2003

Annealing effects of exchange bias fields ($H_{2ex}$(top), $H_{lex}$ (bottom)) on composite type NiFe/[FeMn/Mn]$_{80}$/NiFe multilayers have been studied. Three samples with ultra-thin Mn inserted layers on glass/Ta(50 $\AA$)/NiFe(150 $\AA$)/[F $e_{53}$M $n_{47}$(1.25 $\AA$)/Mn(0 $\AA$, 0.11 $\AA$, 0.3 $\AA$)]$_{80}$/NiFe(90 $\AA$)/Ta(50 $\AA$) were prepared by ion beam sputtering. The average x-ray diffraction peak ratios NiFe(111) of FeMn (111) fcc textures for the Mn inserted total thicknesses of 0 $\AA$, 9 $\AA$, and 24 $\AA$ were about 0.65, 0.90, and 1.5, respectively. For the sample without Mn inserted layer, the $H_{2ex}$ of 260 Oe up to 300 $^{\circ}C$ disappeared at 350 $^{\circ}C$. For two multilayer samples with ultra-thin Mn layers of 0.11 $\AA$ and 0.3 $\AA$, the $H_{2exs}$ of 310 Oe and 180 Oe up to 300 $^{\circ}C$ endured of 215 Oe and 180 Oe at 350 $^{\circ}C$, respectively. The $H_{ex}$ (bottom)s of three samples decreased from 100 Oe to 70 Oe up to 250 $^{\circ}C$, while these values increased beyond 300 $^{\circ}C$. This observation can be attributed to less diffusive path of Mn atoms in bottom NiFe than top NiFe layer. The top and bottom coercive fields slightly varied about 5 Oe∼10 Oe. From these results, we could obtain the enhancement of exchange coupling intensity and thermal stability by an ultra-thin Mn inserted layer on NiFe/[FeMn/Mn]$_{80}$/NiFe Multilayers.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.06a
• /
• pp.315-318
• /
• 1996