• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.81-88
• /
• 2008

This paper presents the travel demand estimation using interval estimation methods during the trip generation stage, and then followed the other three stages of the four stage trip estimation. We have used real data of Dae-jun City. To estimate travel demand using the interval estimation method, a reliability level was set to 95% by a upper bound value, a middle value and a lower bound value. The four stage traffic demand analysis procedure was equally applied and finally interval traffic was estimated. The result showed a difference between maximum values and middle values depending on the destination during the trip generation stage. It depends on an explanation ability of regression analysis. Most of interval estimation ratio resulted in the traffic assignment stage showed ${\pm}5{\sim}18%$ difference on the average and ${\pm}30{\sim}50%$ at the most.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.121-131
• /
• 2014

Traffic speed is an important measure in transportation. It can be employed for various purposes, including traffic congestion detection, travel time estimation, and road design. Consequently, accurate speed prediction is essential in the development of intelligent transportation systems. In this paper, we present an analysis and speed prediction of a certain road section in Busan, South Korea. In previous works, only historical data of the target link are used for prediction. Here, we extract features from real traffic data by considering the neighboring links. After obtaining the candidate features, linear regression, model tree, and k-nearest neighbor (k-NN) are employed for both feature selection and speed prediction. The experiment results show that k-NN outperforms model tree and linear regression for the given dataset. Compared to the other predictors, k-NN significantly reduces the error measures that we use, including mean absolute percentage error (MAPE) and root mean square error (RMSE).

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.17-30
• /
• 2002

Incident duration prediction is one of the most important steps of the overall incident management process. An accurate and reliable estimate of the incident duration can be the main difference between an effective incident management operation and an unacceptable one since, without the knowledge of such time durations, traffic impact can not be estimated or calculated. This research presents several multiple linear regression models for incident duration prediction using data consisting of 384 incident cases. The main source of various incident cases was the Traffic Incident Reports filled out by the Motorist Assistant Units of the Korea Highway Corporation. The models were proposed separately according to the time of day(daytime vs. nighttime) and the fatality/injury incurred (fatality/injury vs. property damage only). Two models using an integrated dataset, one with an intercept and the other without it, were also calibrated and proposed for the generality of model application. Some findings are as follows ; ?Variables such as vehicle turnover, load spills, the number of heavy vehicles involved and the number of blocked lanes were found to significantly affect incident duration times. ?Models, however, tend to overestimate the duration times when a dummy variable, load spill, is used. It was simply because several of load spill incidents had excessively long clearance times. The precision was improved when load spills were further categorized into "small spills" and "large spills" based on the size of vehicles involved. ?Variables such as the number of vehicles involved and the number of blocked lanes found not significant when a regression model was calibrated with an intercept. whereas excluding the intercept from the model structure signifies those variables in a statistical sense.

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.318-329
• /
• 2016

There has been a growing interest on the effect of volcanic eruption on the aviation safety, air travel and economy especially after the eruption of Eyjafjallajokull in Iceland. Since volcanic eruption is influential on a large geographic region, the effect usually extends to other neighboring countries. Korea also has an active volcano named Mountain Baekdu. Hence, the need to estimate in advance the quantitative impact of the potential eruption of Mt. Baekdu on South Korean air transportation system. However, previous studies with quantitative estimation were confined to the calculation of the direct economic loss from shut down of the airports, grounding of airlines, and trade deficits caused by the eruption. Therefore, this paper introduces a new approach to assess more accurate impact simultaneously considering volcanic ash dispersal and aviation routes. This approach is then applied to a virtual scenario to predict the damage to air traffic. With further development, this method can help estimate the damage in the air transportation industry in more accurate and faster ways. Prediction outcomes can also be utilized in setting up the emergency response plan for the air transportation industry and contribute to the creation of more proactive and predictive measures in the future.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.137-149
• /
• 1999

For decades, many traffic flow studies on the analysis and determination of level of service (LOS) for the weaving sections have been made to Provide several regression equations. Weaving and non-weaving speeds were dependent variables for the equations, with independent variables being weaving length, number of lanes, and weaving ratios. One of the difficulties in developing the equations was that the weaving areas were rare in Korea, so the statistical analyses for calibrating the equation parameter could not be performed in a desirable manner. In this regard, a new and stochastic methodology for predicting the weaving and non-weaving speeds within the weaving sections was required. In this study the following design variables were developed; influence area of the weaving section. headway distribution within the weaving section, maximum weaving volume of the weaving section, length of the ideal weaving section, and speed estimations for the weaving and non-weaving flows. The evaluation of the new model was made comparing the delay in the weaving section with the one in the freeway basic section.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.145-154
• /
• 2012

This paper analyzed the characteristics of traffic accidents in all tunnels on nationwide freeways and selected some various independent variables related to accident occurrence in tunnels. The study aims to develop reliable accident forecasting models using the various dependent variables such as the number of accident (no.), no./km, and no./MVK. Finally, reliable multiple linear regression models were proposed in this paper. This study tested the validity verification of developed models through statistics such as $R^2$, F values, multicollinearity, residual analysis. The paper selected the accident forecasting models considering the characteristics of tunnel accidents and two models were finally proposed according to two groups of tunnel length. In the selected models, natural logarithm of ln(no./MVK) is used for the dependent variable and AADT, vertical slope, and tunnel hight are used for the independent variables. The reliability of two models was proved by the comparison analysis between field data and estimating data using RMSE and MAE. These models may be not only effective in evaluating tunnel safety under design and planning phases of tunnel but also useful to reduce traffic accidents in tunnels and to manage the traffic flow of tunnel.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.81-90
• /
• 2006

It is important to clarify the relationship between traffic accidents and various influencing factors in order to reduce the number of traffic accidents. This study developed a traffic accident frequency prediction model using by multi-linear regression and qualification theories which are commonly applied in the field of traffic safety to verify the influences of various factors into the traffic accident frequency The data were collected on the Korean National Highway 17 which shows the highest accident frequencies and fatality rates in Chonbuk province. In order to minimize the uncertainty of the data, the fuzzy theory and neural network theory were applied. The neural network theory can provide fair learning performance by modeling the human neural system mathematically. Tn conclusion, this study focused on the practicability of the fuzzy reasoning theory and the neural network theory for traffic safety analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.1-13
• /
• 2021

In this study, a time series analysis technique was applied to calibrate and predict traffic data for various purposes, such as planning, design, maintenance, and research. Existing algorithms have limitations in application to data such as traffic data because they show strong periodicity and seasonality or irregular data. To overcome and supplement these limitations, we applied the SARIMA model, an analytical technique that combines the autocorrelation model, the Seasonal Auto Regressive(SAR), and the seasonal Moving Average(SMA). According to the analysis, traffic volume prediction using the SARIMA(4,1,3)(4,0,3) 12 model, which is the optimal parameter combination, showed excellent performance of 85% on average. In addition to traffic data, this study is considered to be of great value in that it can contribute significantly to traffic correction and forecast improvement in the event of missing traffic data, and is also applicable to a variety of time series data recently collected.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.476-488
• /
• 2016

This study reviewed factors and causes that affect on reliability and accuracy of transportation demand forecasting. In general, the causes of forecasting errors come from variety and irregularity of trip behaviors, data limitation, data aggregation and model simplification. Theoretical understanding about the inevitable errors will be helpful for reasonable decision making for practical transportation policies. The study especially focused on traffic assignment with the KTDB data, and described the factors and causes of errors by classifying six categories such as (1) errors in input data, (2) errors due to spacial aggregation and representation method of network, (3) errors from representing values for variations of traffic patterns, (4) errors from simplification of traffic flow model, and (5) errors from aggregation of route choice behavior.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.466-469
• /
• 2006

교통 체증이나 도로의 속도를 이전의 통계를 이용하여 예측할 수 있다면 상당히 도움이 될 것이다. 본 논문은 다양한 종류의 도로 중 고속도로의 속도에 영향을 주는 요소를 분석하여 상호 영향을 주는 요소를 고찰한다. 이를 수행하기 위해 고속 도로 교통에 대한 데이터베이스를 구축하며, 도로 교통 데이터베이스에 연계도로와 관계를 적용하고, 다양한 데이터 마이닝의 연산을 사용하여 결과를 도출한다.