• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.105-112
• /
• 2011

Delay reduction of vehicles at the intersection is highly dependent on the signal operation method. Improper traffic operation causes the violation of the traffic regulations and increasing traffic congestion. Delay because of congestion has contributed to the increase in carbon dioxide in the atmosphere. The focus of this paper is to measure the amount of carbon dioxide when the intersection is changed to roundabout. Even though, Intergovernmental Panel on Climate Change(IPCC) recommends Tier 1 method to measure the amount of greenhouse gas from vehicles, this paper used Tier 3 method because we could use the data of average running distance per each vehicle model. Two signalized intersections were selected as the study area and the delay reductions of roundabout operation were estimated by VISSIM microscopic simulation tool. The control delay for boksu intersection reduced from 28.6 seconds to 4.4 seconds and the KRIBB intersection sharply reduced from 156.4 seconds to 23.6 seconds. In addition, carbon dioxide for two intersections reduced to 646.5 ton/year if the intersection is changed to roundabout. Future research tasks include testing the experiment for networks, as well as for various intersection types.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.7-16
• /
• 2009

Korea Highway Capacity Manual (2001) proposes only LOS(Level of Service) analysis method on non-control and two-way-stop intersections, not dealing with the analysis method on LOS for roundabouts, nor even including the term 'roundabout'. This study selects proper MOEs for roundabouts and criteria the LOS through simulation analysis. To attain this goal, the authors reviewed the methods to select proper MOEs in the first step, criteria the Los. For this study, the MOEs were chosen from existing literature, and used for the criteria. The MOEs to be applied to roundabouts in this research were entry traffic volume, v/c (volume/capacity) ratio, and average vehicle delays. The results showed that the maximum entry traffic volume(LOS F) at local one-lane roundabout was analyzed to be 1,700pcph and average vehicle delay 18 seconds LOS A was analyzed as 700pcph and average vehicle delay 3 seconds and v/c 0.41 in this case Maximum entry traffic volume(LOS F) at local area 2 lane roundabouts was analyzed as 2,900pcph and their average vehicle delay as 31 seconds LOS A was analyzed to be 1.500pcph and average vehicle delay 8 seconds, v/c 0.52.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.65-74
• /
• 2010

This study aims at developing a method for estimating passenger car equivalency (PCE) values for various vehicle types that could be considered in estimating capacity and delay at intersections without traffic signals, especially at modern small 3-leg roundabouts. Unlike signalized intersections, the PCE value has not yet been treated explicitly in traffic operations involving unsignalized intersections. Both empirical and theoretical approaches for determining the PCE values at modern small 3-leg roundabouts were evaluated. As a result, the PCEs derived in this study were highly correlated with those of field measurements.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.21-32
• /
• 2007

The linear traffic model(Vertical queueing model) that is adopted widely in traffic flow estimation assumes that all vehicles have the identical motion before joining a queue at the stop-line. Thus, a queue is supposed to form vertically not horizontally. Due to the simplicity of this model, the departure time of the leading vehicle is assumed to coincide with the start of effective green time. Thus, the delay estimates given by the Vertical queueing model is not always realistic. This paper explores a microscopic traffic model(a Kinematic Car-following model at Signalised intersections: a KCS traffic model) based on the one dimensional Kinematic equations in physics. A comparative evaluation in delay and sensitivity of delay difference between the KCS traffic model and the previously known Vertical queueing model is presented. The results show that the delay estimate in the Vertical queueing model is always greater than or equal to the KCS traffic model; however, the sensitivity of delay in the KCS traffic model is greater than the Vertical queueing model.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.385-395
• /
• 2017

This study deals with the small-scale roundabout. The purpose of this study is to analyze the average delay of vehicle in roundabout, and suggest the efficient planning and design standard. In pursuing the above, this study gives particular attentions to analyzing the average delay time according to the inscribed circle diameter, speed of circulatory roadway lane and traffic volume. The operational efficiencies of 96 scenarios (3 sizes of inscribed circle diameter ${\times}$ 4 types of circulatory roadway speed ${\times}$ traffic volume) are analyzed using VISSIM (Verkehr In $St{\ddot{a}}dten$-SIMulationsmodell). The main results are as follows. First, the optimal design speed of small-scale roundabout are derived from the above scenario analysis. Second, the traffic volume of LOS D is estimated to be 2,180-2,740pcph. Third, the traffic volume of LOS F that is required to improve is above 2.780pcph. The results might be expected to give some implications to providing the countermeasures for the operational efficiency of roundabout.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.707-714
• /
• 2021

An important factor that causes delays at roundabouts is unbalanced traffic conditions. The majority of domestic studies have tendedto focus on the proportion of entering traffic rather than conflicting traffic in order to explain unbalanced traffic conditions. Also, there is scant research on the proper distance between a signalized intersection and a roundabout. In this study, therefore, unbalanced traffic conditions and optimal distance between two intersections were analyzed using SIDRA software based on the Gajwa-ro roundabout in Icheon, where unbalanced traffic conditions occur during afternoon peak hours, and its position is 295 m from a signalized intersection. It was found that a state of unbalanced traffic conditions in the form of conflicting traffic caused delays at Gajwa-ro roundabout, and the queuing length on each approach was removed when there was 850 m of distance between two intersections.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.4
• /
• pp.479-484
• /
• 2006

This paper discusses a fitness of the control on intersection using fuzzy analytic hierachy process. The validity of control of traffic signal on intersection is the fitness of phase and cycle on the intersection. The validity of the controller is cleared by the comparison of the delay time of vehicle. Fuzzy analytic hierachy process clears the grade of validity of the fixed cycle time controller and adaptive fixed cycle time and fuzzy trafic controller and proposes a new control type a traffic signal by this fuzzy analytic hierachy process.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.218-226
• /
• 2014

This study examines a way to install a crosswalk that can improve pedestrians' convenience and safety and that goes beyond the crosswalk design standard of existing roundabouts. When a scrambled crosswalk, one of the crosswalk installation methods, is introduced to the roundabout system, it shortens the cross-walking distance of pedestrians and thus enhances convenience. Although the installation of a scrambled crosswalk may enhance pedestrians' convenience, it may obstruct vehicular traffic. Thus, this study presents standards for reasonable diagonal crosswalk installation based on the investigation on its effects on a vehicle's delay time. This study includes an analysis of the various geometric structures of roundabouts. The study results show that as v/c and the number of pedestrians increased, the delay time after the installation of a scrambled crosswalk increased although the extent was different. In general, the effect of the installation of a scrambled crosswalk was insignificant regardless of the number of pedestrians when v/c was under 0.6. When the number of pedestrians was 300/hour or lower, the difference in the delay time was quite insignificant regardless of v/c. In addition, as the inscribed circle of the roundabout was larger, the difference in the delay time decreased depending on v/c and the number of pedestrians.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.19-32
• /
• 2000

우리나라 비신호 교차로의 운영방법은 미국과는 다르게 대부분 완전 비제어식 운영(Totally Uncontrol)방법으로 되어있다. 본 연구에서는 우리나라 비신호 교차로들 중 미국 HCM의 TWSC 교차로에 관한 분석방법이 적용 가능하다고 판단되는 비신호 교차로들을 대상으로 임계간격과 추종시간의 기준을 분석하였다. 본 연구에서는 수도권을 중심으로 총 11개의 4-지 비신호 교차로들을 대상으로 이동류별, 차량의 종류별에 따른 차량들의 임계간격과 추종시간을 조사 및 분석하였다. 그 결과 임계간격은 3.8초 - 5.4 초로 나타났으며, 추종시간은 2.4초- 2.7초 범위를 나타내었다. 또한, 임계간격의 경우 차량의 종류별에 따른 차이는 나타나지 않았으나, 이동류별로는 차이를 나타내었다. 이에 반하여, 추종시간은 이동류별에 따른 차이가 없으며, 차량의 종류별에 따라 차이가 존재하는 것으로 분석되었다. 본 연구의 분석 결과인 임계간격과 추종시간의 기준치를 국외 나라들의 연구결과와 비교 분석한 결과는 국외보다 낮게 분석되었으며, 이는 우리나라와 국외의 운전자 운전특성과 비신호 교차로의 운영방식의 차이에서 나타난 결과로 판단된다. 본 연구에서 제안한 임계간격과 추종시간의 기준은 수도권 지역의 4-지 비신호 교차로들 중 주도로와 부도로의 교통량과 속도 등의 현저한 차이가 있는 교차로 분석시 이 기준으로 적용할 수 있고, 우리 나라의 TWSC 방법을 갖는 비신호 교차로에 관한 용량과 지체시간의 이론적 모형 개발과 용량 및 지체시간의 분석을 위한 기초 자료로 활용할 수 있을 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.269-281
• /
• 2018

Unlike its archetype predecessor such as the Highway Capacity Manual of the United States, the Korean Highway Capacity Manual of 2013 provides the analytical models for estimating the saturation flow rates for the lane-occupying work-zones in the proximity of the signalized intersections. Direct application of the revised saturation flow rates into the classic control delay models, however, appears to produce unreasonable delay amount as traffic demand approaches lane-group capacities and surpasses them, which is common phenomena in the work-zones. Complex interaction among vehicles, lane-dropping work-zone geometry and signal operations were never accounted in the traditional control delay models, and considerable differences between the delay model outcomes and field observations are repeatedly experienced. This paper proposes the modified approaches to the delay models in the manual, exerted on all three elements of control delay, and particularly focuses on the temporal and spatial boundary expansion in comparing the simulated results to the estimated ones. Extensive microscopic simulation work and calibration effort supports the modified approaches well enough to use them in the work-zone planning and evaluation.