• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2005

This paper presents the experimental results measured by photoelastic 4-step phase shifting method for the isochromatic fringe distribution in a TV glass panel. In the conventional photoelastic method, the isochromatic fringe orders are measured manually point by point. The 4-step phase shifting method uses four images obtained from a circular polariscope by rotating the analyzer to $0^{\circ},\;45^{\circ},\;90^{\circ}$, and $135^{\circ}$. In order to use the 4-step phase shifting method, the elements of a polariscope should be aligned to isoclinic direction at a point and/or along a line where isochromatic fringe distribution is measured. Experimental results obtained from the 4-step phase shifting method are compared with those measured by the Senarmont compensation method. Both results are well agreed. Then, isochromatic fringe distributions in the TV glass panel that is heat-treated before and after are compared. Maximum and minimum isochromatic fringe orders in the TV glass panel with before- and after-heat treatment are changed approximately two times.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.104-104
• /
• 2011

ZnO는 3.37 eV의 넓은 에너지 밴드갭을 갖는 투명 전도성 반도체이며 우수한 전기적, 광학적 특성으로 인해 광원소자 개발을 위한 새로운 물질로 많은 주목을 받아왔다. 더욱이, ZnO는 쉽게 나노구조 형성이 가능하기 때문에 이를 응용한 가스센서, 염료감응태양전지, 광검출기 등의 소자 개발이 활발히 이루어지고 있다. 최근에는 GaN 기반 발광다이오드 (light emitting diode, LED)의 광추출 효율을 향상시키기 위한 ZnO 나노구조 응용에 관한 연구가 보고되고 있다. GaN 기반 LED의 경우 반도체 물질과 공기 사이의 높은 굴절률 차이로 인하여 낮은 광추출 효율을 나타낸다. 이를 해결하기 위한 방법으로 표면 roughening, texturing 등 에칭공정을 이용해 광추출 효율을 개선하려는 연구들이 보고되고 있으나, 복잡한 공정과정을 필요로 하고 에칭공정에 의한 소자 표면 손상으로 전기적 특성이 나빠질 수 있다. 반면 전기화학증착법으로 성장된 ZnO 나노구조를 이용할 때, 보다 간단한 방법으로 쉽고 빠르게 나노구조를 형성할 수 있고 낮은 공정온도를 가지기 때문에 소자의 전기적 특성에 큰 영향을 주지 않는다. 수직방향으로 잘 정렬된 ZnO 나노구조를 갖는 LED의 경우 내부 Fresnel 반사 손실을 효과적으로 줄여 발광 효율을 크게 향상시킬 수 있다. 따라서, ZnO 나노구조의 성장제어 및 성장특성을 분석하는 것은 매우 중요하다. 본 연구에서는 ITO glass 위에 ZnO 나노구조를 성장하고 그 특성을 분석하였다. ITO glass 기판 위에 RF magnetron 스퍼터를 사용하여 Al 도핑된 ZnO (AZO)를 얇게 증착한 후 전기화학증착법으로 ZnO 나노구조를 성장하였다. 농도, 인가전압, 공정시간 등 다양한 공정조건을 변화시키면서 성장 메커니즘을 분석하였고, scanning electron microscope (SEM) 및 X-ray diffraction (XRD)을 통하여 구조 및 결정성 등을 분석하였다. 또한, UV-Visible-NIR spectrophotometer를 사용하여 투과율을 실험적으로 측정하여 ZnO 나노구조의 광학적 특성을 분석하였고, rigorous coupled wave analysis (RCWA) 방법을 사용하여 계면에서 발생하는 내부 반사율을 계산함으로써 나노구조의 효과를 이론적으로 분석하였다.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.94-98
• /
• 2006

An optical microphone based on a dual-core fiber collimator and a membrane type micromirror serving as an optical head and a reflective diaphragm respectively was implemented. The micromirror diaphragm is suspended by a thin silicon bar linked with a frame, thus it is subject to a displacement induced by acoustic waves. The optical head incorporating two collimators integrated in a single housing gives light to and receives it from the diaphragm, rendering the optical microphone structure simple and compact. This dual-core collimator having a slowing varying beam profile facilitates the initial alignment of the optical head with the diaphragm, especially the distance between them. For the assembled microphone, the static characteristics were investigated tofind the operation point defined as the optimum distance between the head and the diaphragm, and a frequency response with a variation of about $\pm$5 dB for the range of up to 3kHz was achieved.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.21-26
• /
• 2008

In this paper, a novel 622Mbps burst-mode clock and data recovery (CDR) circuit is proposed for passive optical network (PON) applications. The CDR circuits are implemented with 0.35um CMOS process technology. Locking dynamics is accomplished with instantaneous feature and data are sampled at an optimal timing. This is realized by seven different delay configurations, which are generated from precisely-controlled delay buffers. The experimental results show that the proposed CDR circuits are operating as expected, recovering an incoming 622Mbps burst-mode input data without errors.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.17-24
• /
• 2005

We fabricated PIN-Photodiodes with a single mode fiber for analog communications and analyzed characteristics of the devices. The fabricated PIN-Photodiode shows a bandwidth of 1.5 GHz, a dark current of 20 p4 a capacitance of 0.48 pF, and the responsivity of 0.9 V/W, a second order distortion of -72 dBc. In this paper, we developed a new optical Packaging technology that is aligning in real-time monitoring of both responsivity and IM2 characteristics. As a result responsivity has been improved by 0.03 V/W, and also U has been improved by $3\~5\;dBc$. On the other hand, failure ratio has been reduced by $3.5\%$.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.118-123
• /
• 2008

Weakness process can be called ferrule array and epoxy filling process at connector manufacturing process, and a lot of problems happen as think as general manufacturing process at early investment. Wished to improve this and working environment mend of worker on childhood(planning phase) and problem that is happened at done ferrule array and epoxy injection by emphasis target. By ferrule sorting and Improvement of epoxy filling process, bring authoritativeness elevation of product by fraction defective decrease of product by sized work along with productivity elevation. On the other hand, working jigs are various in characteristics of optical connector manufacturing line. There have been lots of restriction in practice because the applicability of this system is only for single type model though the network should be smooth between lines. Thus, it is not only needed the recognition of necessity in industrial line but also the development of automation system arraying ferrule and filling epoxy in the manufacturing process. It is found that the present system development enhances productivity fairly and prevents industrial disaster in the optical connector manufacturing system.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.9-14
• /
• 1999

In this paper, a method of one line transmission of 622Mbps to interface a low speed part with a high speed part is introduced instead of H-BUS method of the 10 line transmission of 77.76Mbps in the 10Gbps optical transmission system. For this method, a reframing method to align the received data of 622Mbps transmission to STM(Synchronous Transfer Mode)-64 frame of SDH(Synchronous Digital Hierarchy) is described. Reframing is designed with VHDL and applied in the 10G-S4 ASIC of T14U board of 10Gbps optical transmission system.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.258-263
• /
• 1998

Quasi-elastic light scattering is utilized to measure the mean diameter of the 0.3 $\mu\textrm{m}$-dimeter polystyrene sphere. The mean diameter of the polystyrene sphere is required to be known within the uncertainty of a few per centages. The systematic error has been considerably reduced by improving the system for the angle alignment and temperature measurement of cell. NIST SRM 1691 (0.269$\pm$0.007 $\mu\textrm{m}$: TEM; 0.275$\pm$0.007 $\mu\textrm{m}$: QELS) is measured to be 0.273 $\mu\textrm{m}$$\pm$0.006 $\mu\textrm{m}$ in mean diameter. Detailed description is given of the improved method and the resultant uncertainty, and the comparison of results with NIST is followed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.201.2-201.2
• /
• 2013

원자층 증착법(ALD)을 통해 최적의 Al doped ZnO (AZO)박막을 얻기 위해 기판온도와 Al도핑농도 등의 공정변수를 조절하여 최적의 성막 조건 연구특성을 분석하였다. 증착당시 Zn와 Al의 precursors는 diethylzinc(DEZ), trimethylaluminum(TMA)을 각각 사용하였으며, reactants로는 Deionized water를 사용하였다. DEZ와 TMA의 증착비율을 통하여 1%에서 12%까지 Al의 도핑농도를 조절하였다. 이후 Hall effect measurement를 이용하여 기판온도와 Al도핑농도에 따른 AZO박막의 운반자 농도, 이동도, 저항을 분석했고, X-ray diffraction을 통하여 물리적 구조의 변화를 관측했다. 공정 최적화를 통하여 Al도핑농도의 변화가 AZO박막의 전기적 특성에 미치는 영향을 해석하였다. 또한, 공정의 최적화 이후 AZO박막을 나노 구조체 석영(quartz)기판위에 250도의 온도에서 Al ~3%의 농도로 10nm부터 150nm까지의 두께로 증착하였다. SEM 분석을 통해 나노 구조체 기판에 균일한 AZO 박막이 형성되었는지 확인하였고, AZO박막의 두께에 따른 전기적 특성 및 광 투과도를 측정한 결과 나노구조체 석영 기판위에 증착된 AZO박막은 가시광선 영역에서 80%이상의 광 투과도를 보였으며 ${\sim}10^{-3}{\Omega}cm$의 저항을 보였다.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.75-80
• /
• 2018

The working principle of a satellite camera involves a focusing mechanism for controlling the focus of the optical system, which is essential for proper functioning. However, research on focusing mechanisms of satellite optical systems in Korea is in the beginning stage and developed technology is limited to a thermal control type. Therefore, in this paper, we propose a motor-driven focusing mechanism applicable to small satellite optical systems. The proposed mechanism is designed to generate z-axis displacement in the secondary mirror by a motor. In addition, three flexure hinges have been installed on the supporter for application of preload on the mechanism resulting in minimization of the alignment error arising due to manufacturing tolerance and assembly tolerance within the mechanism. After fabrication of the mechanism, the alignment errors (de-space, de-center, and tilt) were measured with LVDT sensors and laser displacement meters. Conclusively, the proposed focusing mechanism could achieve proper alignment degree, which can be applicable to small satellite optical system.