• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.761-764
• /
• 2010

Interest in vehicle infotainment system, that provides both entertainment of driving and information for safe and convenient driving, has been recently increased. MOST is defined as the network transmitting high-bandwidth infortainment data to vehicle, and it has been standardized as MOST150. In this research, dynamic behavior method that deals with roles and functions of each devices connected to MOST150 Network, and Power Management Method was studied. MOST Network consists of a master device, including function block 'NetworkMaster', and all other devices called slave devices. The purpose of this study is to apply the analysis of the methods of operating and power management based on condition of master device and slave devices on MOST150 network to the future development of MOST150 devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.177-177
• /
• 2013

디스플레이 화소 스위치 소자로 수소화된 비정질 실리콘 박막 트랜지스터를 금속 산화물 반도체 박막 트랜지스터(thin film transistor, TFT)로 대체하기 위한 연구가 활발히 진행되고 있다. 금속 산화물 중에서 박막 트랜지스터의 활성층으로 응용이 가능한 가장 대표적인 물질은 인듐(In), 갈륨(Ga), 아연(Zn), 산소(O) 화합물인 InGaZnO이다. InGaZnO TFT의 전기적 특성은 비정질 실리콘보다 우수한 것으로 확인이 되었지만, 소자의 신뢰성은 아직까지 해결해야 할 문제로 남아있다. 본 연구에서는 InGaZnO TFT를 제작하여 게이트 바이어스와 빛을 소자에 동시에 인가했을 때 발생하는 소자의 열화현상을 분석하였다. 다양한 채널 폭과 길이를 갖는 InGaZnO TFT를 제작하고 동시에 활성층의 구조를 두가지로 제작하였다. 첫번째는 활성층의 폭이 소오스/드레인 전극 폭보다 넓은 구조(active wide, AW)이고 두번째는 활성층의 폭이 소오스/드레인 전극 폭보다 좁은 구조(active narrow, AN) 구조이다. 이들 소자에 대해 +20 V의 게이트 바이어스와 빛을 동시에 인가하여 10000초 후의 소자 특성을 초기 특성과 비교하였을 때는 열화가 거의 발생하지 않았다. 반면 -20 V의 게이트 바이어스와 빛을 동시에 인가하여 10000초 후의 소자 특성을 초기 특성과 비교하면 전달특성 곡선이 음의 게이트 전압 방향으로 이동함과 동시에 문턱전압이하의 동작 영역에서 전달특성 곡선의 hump가 발생하였다. 이 hump 특성은 AW 구조의 소자와 AN 구조의 소자에서 나타나는 정도가 다름을 확인하였다. 이러한 열화 현상의 원인으로 음의 게이트 바이어스와 빛이 동시에 인가될 경우 InGaZnO 박막 내에는 활성층 내에 캐리어 밀도를 증가시키는 donor type의 defect가 발생하는 것으로 추정할 수 있었다. 추가적으로 활성층의 테두리 영역에서는 이러한 defect의 발생이 더 많이 발생함을 알 수 있었다. 따라서, 활성층의 테두리 영역이 소오스/드레인 전극과 직접 연결이 되는 AN 구조에서는 hump의 발생정도가 AW 구조보다 더 심하게 발생한 것으로 분석되었다.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.213-217
• /
• 1997

AOhf(Hcousto-r)l)tic niodulator) with :!OOlIiz freclucncl- and Sfi(;(Seconrl harmonic generation) green lasel-Lvith 53% nm wavelength were used for Il\'IIII~Dii.it,ii v~ilco disk recorder) FOI rhe appli~aptin of high densit]. optical recording, a high po\ver I ~ c r is r c ~ ~ l i ~ i l - u l ic I !tic. s\-sti,m a n d optic.,~I io;iting l,t)c>rs of each optical device must have a high laser damage threshoid hie rn;itie ant] retlwtive coatings on a $TeO_{2}$ singlc crystal. which is used as an acoustooptic material, by E-beam evaporation method. Laser damage threshold \vas nicdsureci hy Ar laser with the input power oi 0.55LV 1,aser damage threiholti 01 $ZrO_{2}$ and $SiO_{2}$. filn-is were higher than $AI_{2}O_{3}$ f i l m U'e also investigated a long--tern1 stability of the output po\ver of St{(; green laser

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.123-129
• /
• 2016

In this paper, results of produced PCU(Power Control Unit) prototype was showed by suggesting and maintaining optimal operation status which let the three functional modules automatically operate with its necessity by prioritizing operation process. In order to validate effectiveness of the suggested method, we produced a test PCU and examined the results. PCU consists of S3R(Sequential Switching Shunt Regulator), BCR(Battery Charge Regulator), and BDR(Battery Discharge Regulator): converting photovoltaic power into constant voltage at linked bus voltage; storing dump power in the battery which is an auxiliary energy storage device; and supplying power charged in battery to the load. To maintain its high reliability and optimal condition of these three power conversion modules, each module operates in parallel and stable bus voltage is required to be retained at all-time due to the nature of power supply for satellite.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.449-453
• /
• 2021

Interest and investment in renewable energy have increased worldwide, highlighting the need for renewable energy. Solar energy was the most promising energy of all renewable energy sources, and it has the highest investment value. Because photovoltaics require a certain amount of area for installation, high density and high output performance are required. Shingled module is a promising technology in that they are featured by higher density and higher output compared to the conventional modules. Shingled technology uses a laser scribing to divide solar cells that are to be bonded with electrically conductive adhesive (ECA) to produce and connect strings, which has a higher output in the same area than the conventional modules. In the process of producing solar modules, metal ribbons are used to interconnect cells, but they are also needed for string connections in shingled solar cells. Accordingly, in this study, we researched the interconnection that best suits the connector that joins the string to the string. The module outputs produced under the conditions of the string interconnection were compared and analyzed.

• Environmental and Resource Economics Review
• /
• v.30 no.3
• /
• pp.435-469
• /
• 2021

The main purpose of this study is to identify the determinants of electricity import and export in 26 European Union countries using the Spatial durbin model(SDM). In particular, we would like to mainly explain it based on the amount of power generated by each energy source. Not just the usual way of constructing a weighting matrix based on contiguity, we adopt a weighting method based on the proportion of trade among countries with connected electricity systems. Moreover, the electricity systems of European countries are directly and indirectly connected, which is reflected in the weighting matrix. According to the results, nuclear power has a positive effect on exports and a negative effect on imports, and an increase in wind and solar power has a positive effect on both exports and imports by increasing power system instability. While Korea is unable to trade electricity due to geopolitical conditions, the results of this study are expected to provide implications for energy policies.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.11-19
• /
• 2021

In this paper, we propose a prototype platform combined with the power management system using, as an auxiliary power storage device, a supercapacitor that can be fast charged and discharged with high power efficiency as well as semi-permanent charge and discharge cycle life. For the proposed platform, we designed a technique which is capable of detecting the state of power cutoff or resumption of power supplied from the solar panel in accordance with physical environment changes through an interrupt attached to the micro-controller was developed. To prevent data loss in a computing environment in which continuous power supply is not guaranteed, we implemented a low-level system software in the micro-controller to transfer program context and data in volatile memory to nonvolatile memory when power supply is cut off. Experimental results shows that supercapacitors effectively supply temporary power as auxiliary power storage devices. Various benchmarks also confirm that power state detection and transfer of program context and data from volatile memory to nonvolatile memory have low overhead.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.653-660
• /
• 2021

Renewable energy resources are rapidly becoming an integral part of electricity generation portfolios around the world due to declining costs, government subsidies, and corporate sustainability goal. Interacting wind, solar, and load forecast errors can create significant unpredictable impacts on the distribution system, feeder congestion, voltage standard and reactive power stability margins. These impacts will be increasing with the increasing penetration levels of variable renewable generation in the power systems. There is a limit to the maximum amount of renewable energy sources that can be connected in a distribution feeder by the connection rule of transmission & distribution facility in Korea. This study represents the decision plans of hosting capacity for distribution feeders without the need for significant upgrades to the existing transmission infrastructure. Especially, the paper suggests and discusses the hosting capacity standard of feeder cables and minimum load calculation of distribution feeders.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.35-40
• /
• 2022

PCVD (Plasma Chemical Vapor Deposition), a solar cell manufacturing facility, is a facility that deposits plasma generated in a chamber (NH₃, SIH₄, O₂ on a wafer. In the PCVD facility, gas movement and injection is performed in the gas cabinet, and there are many leak points inside because MFC, regulator, valve, pipe, etc. are intricately connected. In order to prevent explosion in case of leakage of NH₃ with an upper explosive limit (UEL) of 33.6% and a lower explosive limit (LEL) of 15%, the dilution capacity must be capable of allowing the concentration of NH₃ to be out of the explosive range. This study was analyzed using the CFD analysis technique, which can confirm the dilution ability in 3D and numerical values when NH₃ gas leaks from the existing PCVD gas cabinet. As a result, it was concluded that it corresponds to medium dilution and that testicular ventilation is possible through facility improvement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.715-722
• /
• 2022

If you don't regularly go to the dentist to check your teeth, it is difficult to notice cavities or various diseases of your teeth until you have pain or discomfort. Dental plaque is produced by the combination of food or foreign substances and bacteria in the mouth. Starch breaks down from the bacteria that form tartar. The acid that occurs at this time melts the enamel of the teeth and becomes a cavity. So tartar management is important. Poppyrin, the metabolism of bacteria in the mouth, reacts at 405 nm wavelengths and becomes red fluorescent, which can be seen by imaging through certain wavelength filters. By the above method, Frag and tartar are fluorescently detected and photographed with a yellow series of filters that pass wavelengths of 500 nm or more. It uses MATLAB to detect and display red fluorescence through image processing. Using the difference in voltage between normal teeth and tartar through an optical measuring circuit, it was connected to an Arduino and displayed on the LCD. This allows the user to know the presence and location of dental plaque more accurately.