• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.397-399
• /
• 2007

본 연구는 광전자 촉매시스템을 이용해 $TiO_2$ 졸이 코팅된 구형 비드의 광분해 효율에 대해 고찰한 것이다. $TiO_2$ 졸이 코팅된 구형 비드인 실리카비드 화이트겔(1 2 3형) 세 가지 비드를 사용하였고 실험은 1L 크기의 반응기에 유기 물질을 함유한 인공 폐수를 넣어 비드에 코팅된 $TiO_2$의 분해 활성을 고찰할 목적으로 실행되었다. 그 결과, $500^{\circ}C$에서 3hr에서 소성한 실리카 비드가 가장 뛰어난 반응성을 나타내며 인공폐수에서도 분해활성을 나타내는 것을 확인하였다.

• Clean Technology
• /
• v.27 no.2
• /
• pp.146-151
• /
• 2021

Pure and Sm ion doped BiVO₄ catalysts were synthesized using a conventional hydrothermal method and characterized by XRD, DRS, SEM, and PL. We also examined the activity of these materials on the photocatalytic decomposition of rhodamine B under visible light irradiation. The doping of Sm ion into BiVO₄ catalyst changed the ms-BiVO₄ crystal structure into the tz-BiVO₄ crystal structure in the low synthesis temperature. Light absorption analysis using DRS showed that all the catalysts displayed strong absorption in the visible range of the electromagnetic spectrum regardless of Sm ion doping. In addition, an amorphous morphology was shown in the pure BiVO₄ catalyst, but the morphology of the BiVO₄ catalyst doped with Sm ion was changed into an ellipse shape and also the particle size decreased. In the photocatalytic decomposition of rhodamine B, Sm ion doped BiVO₄ catalyst showed higher photocatalytic activity than the pure BiVO₄ catalyst. In addition, the Sm3-BVO catalyst doped with 3% Sm ion showed the highest photocatalytic activity, as well as the highest formation rate of OH radicals (•OH) and the highest PL peak. This result suggests that the formation rate of OH radicals produced in the interface between the photocatalyst and water is well correlated with the photocatalytic activity.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.45-52
• /
• 1995

The photocatalytic activity of TiO$_2$ was investigated as a function of added amount of Nb$_2$O$_{5}$, heat treatment temperature and the decomposition rate of 1 mM dichloroacetic acid(DCA). Mixed oxides of TiO$_2$ and Nb$_2$O$_{5}$ was prepared by the sol-gel process. The addition of Nb$_2$O$_{5}$ into TiO$_2$ has deleterious effect on the decomposition rate of DCA, which was decreased as the amount of Nb$_2$O$_{5}$ was increased. The excess electrons due to the doping of Nb$_2$O$_{5}$ into TiO$_2$ can promote the reduction process instead of oxidation or recombination rate with electron holes. The most efficient photocatalyst was the one heat treated at 40$0^{\circ}C$ for an hour as far as the heat treatment temperature is concerned. The lower the pH of the solution, the higher the quantum yield.tum yield.

• Clean Technology
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2020

Ti-SBA-15 catalysts doped with lanthanide ions (Ln/Ti-SBA-15) were successfully synthesized using conventional hydrothermal method. In addition, they were characterized by XRD, FT-IR, DRS, BET, and PL. The activity of these materials on the photocatalytic decomposition of methylene blue under ultraviolet light irradiation was also examined. Ti-SBA-15 catalysts doped with various lanthanide ions maintained their mesoporous structure. The pore size and pore volume of Ln/Ti-SBA-15 materials decreased but their surface area increased upon the doping of lanthanide ion. Ln/Ti-SBA-15 materials exhibited the type IV nitrogen isotherm with desorption hysteresis loop type H2, which was characteristic of mesoporous materials. The size of hysteresis increased in the doping of lanthanide ions on Ti-SBA-15 material. There was no absorption in the visible region (> 400 nm) regardless of the doping of lanthanide ions to TiO₂ particles, while the broad bands at 220 nm appeared at the Ln/Ti-SBA-15 samples, indicating the framework incorporation of titanium into SBA-15. 1 mol% Pr/ Ti-SBA-15 catalysts showed the highest photocatalytic activity on the decomposition of methylene blue but the Ti-SBA-15 catalysts doped with Eu, Er, and Nd ions showed lower activity compared to pure Ti-SBA-15 catalyst. The PL peaks appeared at about 410 nm at all catalysts while the excitonic PL signal was proportional to the photocatalytic activity for the decomposition of methylene blue.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.61-66
• /
• 2011

In this study, we prepared $TiO_2$ with the sol-gel method and controlled physico-chemical properties by a simple heat treatment. All materials were applied to photocatalytic decomposition of methylene blue and the material treated at 473 K showed the highest photocatalytic efficiency. The high performance resulted from a high adsorption amount of methylene blue due to a high surface area of $229.8m^2/g$. However, the material treated at 873 K, despite of a low surface area of $23.8m^2/g$ and a large particle size of 28.38 nm, exhibits a good photocatalytic performance due to the effect of mixed cyrstalline rutile and anatase phases formed by the high heat treatment temperature.

• Clean Technology
• /
• v.26 no.4
• /
• pp.311-320
• /
• 2020

In this study, the photocatalytic degradation of rhodamine B (RhB), methyl orange (MO) and methylene blue (MB) was carried out under visible light irradiation using CdS and CdZnS/ZnO photocatalysts prepared by a simple precipitation method. This study focused on examining the effect of physicochemical properties of dye and photocatalyst on the reaction pathway of photocatalytic degradation. The prepared photocatalysts were characterized by XRD, UV-vis DRS and XPS. Both the CdS and CdZnS/ZnO photocatalysts exhibit an excellent absorption in the visible light and the UV light regions. It was observed that the photocatalytic degradation of MO proceeds via the same reaction mechanism on both the CdS and CdZnS/ZnO photocatalysts. However, the photocatalytic degradation of RhB and MB was found to proceed through a different reaction pathway on the CdS and CdZnS/ZnO catalysts. It is interesting to note that MB dimer was formed on the CdS catalyst at the beginning of the photocatalytic reaction, while the MB monomer was degraded during the overall photocatalytic reaction on CdZnS/ZnO. The above results may be mainly ascribed to the difference of band edge potential of the conduction band in the CdS and CdZnS/ZnO semiconductors and the adsorption property of dye on the catalysts.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.291-292
• /
• 2001

자동차 운행 및 산업화로 인한 유류 및 유기용제의 사용증가는 배출되는 휘발성 유기화합물의 증가로 이어졌다. 이로 인해 광학적 스모그의 생성과 오존층파괴, 지구 온난화 그리고 악취공해 유발등 환경오염을 촉진시키고 자체의 유해한 성질로 환경 및 건강에 심각한 영향을 초래하여 이러한 오염물질의 제거를 위한 수단으로 광촉매반응이 최근 주목을 받고 있다. (중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1579-1584
• /
• 2015

In photocatalytic reaction, the doping of metal matter can alter the titania surface properties. As such the metal matter can increase the rate of the reaction. The influence of metal doping and calcination condition of $TiO_2$ photocatalyst was investigated at the batch-type photoreactor. Several metal matters were doped to the $TiO_2$ catalyst to improve photodegradation efficiency. During the experiments, water content was 3wt%, and reactor temperature was $40^{\circ}C$. Palladium-doped $TiO_2$ was found to be the best, where as platinum or tungsten-added also showed good results. Additional doping of platinum or tungsten on Pd/$TiO_2$ had no increase on the removal efficiency. To obtain proper calcination condition, various experiments about calcination temperature and time were carried out. As a result, the optimum calcination condition was temperature of $400^{\circ}C$, time of 1 hour.

• Clean Technology
• /
• v.23 no.1
• /
• pp.95-103
• /
• 2017

In this study, $ATiO_3$ (A = Ca, Sr, Ba) perovskite, which is the widely known for non $TiO_2$ photocatalysts, were synthesized using sol-gel method. And Ni was added at the A site of $ATiO_3$ by using that it is easy to incorporate. The physicochemical characteristics of the obtained $ATiO_3$ and Ni-$ATiO_3$ particles were confirmed using the X-ray diffraction (XRD) UV-visible spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), the $N_2$ adsorption-desorption isotherm measurement, and X-ray photoelectron spectroscopy (XPS). The $H_2$ was produced using the photolysis of MeOH. Using the Ni-$ATiO_3$ photocatalysts, $H_2$ production was higher than using the $ATiO_3$ photocatalysts. Especially, $273.84mmolg^{-1}$ $H_2$ was produced after 24 h reaction over the Ni-$SrTiO_3$. Also in the water (0.1 M KOH) with the Ni-$SrTiO_3$, $H_2$ production was $961.51mmolg^{-1}$ after 24 h reaction.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.307-312
• /
• 2016

Lead molybdate ($PbMoO_4$) was successfully synthesized using a facile surfactant-assisted hydrothermal process and characterized by XRD, Raman, TEM, PL, BET and DRS. We also investigated the photocatalytic activity of these materials for the decomposition of Rhodamine B under UV-light irradiation. From XRD and Raman results, well-crystallized $PbMoO_4$ crystals were successfully synthesized with the particle size of 52-69 nm. $PbMoO_4$ catalysts prepared in the presence of cetyltrimethyl ammonium bromide (CTAB) enhanced the photocatalytic activity compared to that of using P-25 and pure $PbMoO_4$ catalysts. The maximum photocatalytic activity of $PbMoO_4$ catalyst were observed when preparing it in pH 9 solution. The The PL peak at about 540 nm were observed for all catalysts and the excitonic PL signal increased proportionally with respect to the photocatalytic activity of Rhodamine B.