• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.68-68
• /
• 2011

본 연구에서는 PV cell이 직달 일사에 노출되는 경우와 집광된 태양광에 조사되는 경우의 성능을 비교하는 한편 집광기의 형태에 따른 열적 성능을 검토하고자 하였다. PV cell은 본질적으로 반도체의 특성을 가지므로 작동온도의 상승에 따라 성능이 저하된다는 사실이 알려져 있으며, 태양조사의 강도 및 밀도 등 특성에 따라서도 성능의 변화를 예상할 수 있다. 그러나 이러한 성능변화에 관련된 인자들과 그 영향의 크기에 대한 정량적인 기술자료가 부족하므로 설치와 이용에 한계가 있는 것이 현실이다. 인공태양 장치(solar simulator)를 이용하여 0.7에서 1.2 sun 범위의 태양 조사 환경에서 결정질 실리콘계 PV cell과 집광형 PV cell의 성능을 검토하였다. 집광에 사용한 PTC는 집광면적의 폭이 500 mm이며, 집광 조사면적이 최소 10 mm인 경우 이론적 최대 집광비가 50이었다. PTC의 축방향으로는 균일한 태양조사가 있게된다는 것을 가정하여 모델의 길이는 간편한 실험을 위해 150에서 500 mm의 범위에서 제작하였다. 수평으로 놓인 PTC의 상부 초점 위치로부터 집광면이 아래 쪽에 위치할수록 집광 조사 면적이 증가하므로 PV cell의 크기에 따라 PTC 초점의 위치로부터 거리를 결정하였다. 한편, PTC 자체의 성능도 촛점거리와 집광면 폭의 비에 따라 달라질 수 있다는 가정 하에, 포물면의 최저 위치로부터 촛점거리는 각각 300, 400 및 500 mm가 되도록 세가지 형태를 제작하여 사용하였다. 동일한 형태의 PTC에서 PV cell의 동일한 설치 위치에서도 최고 $110^{\circ}C$ 범위의 PV cell의 작동 (표면) 온도에 따른 성능의 차이를 관찰하기 위해 셀의 후면을 냉각시키는 경우와 그렇지 않은 경우를 비교하였다. PV cell의 표면 온도 측정을 위해서, 후면의 온도와 같이 광선 차단 효과의 우려가 없는 경우에는 열전대를 설치하였으며, 셀의 전면 온도 측정을 위해서는 비접촉식 적외선 온도계를 사용하였다. 냉각 방법으로는 공기를 이용한 자연대류와 액체를 사용하는 강제대류의 경우를 고려하였으며, 필요에 따라 적절히 설계된 히트싱크를 설치하여 비교 실험을 진행하였다. 강제대류 냉각의 경우는 항온조를 사용하여 순환하는 냉각수의 유량과 공급온도를 변화시킴으로써 PV cell의 작동온도를 조절하고, 이에 따른 발전 성능의 변화를 관찰하였다. 본 연구에서 도출한 실험 및 분석 결과는 PV cell의 설치 환경과 작동온도의 변화에 따라 그 성능 변화를 예측할 수 있는 기술적 자료를 제공함으로써 에너지 이용의 합리화를 도모하는데 기여할 수 있을 것이다.

• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.49-56
• /
• 2003

The purposes of this study are to improve the ultrasound resolution of various nylon and metallic mono-filament wires, therefore, it was tested that it analyze on nylon mono-filament wire of 0.1 mm in A Co.'s ultrasonic phantom and synthesis of C15 g tissue mimicking materials(TMM), analyze resolution of nylon and metallic mono-filament wires in water and TMM. The results obtained were summarized as follows: 1. Metallic mono-filament wire of 0.1 mm and nylon mono-filament wire of 0.12 mm, 180 denier showed that it cleared dot echo pattern. 2. Metallic and nylon mono-filament wire of 0.2 mm showed that it cleared comet tail echo by reverberation artifact. 3. Nylon and metallic mono-filament wire of 0.1 mm showed that it can used for dead zone and axial resolution test. 4. Nylon mono-filament wire compared with metallic mono-filament wire showed that it satisfy elasticity and construction. 5. Degree of hardness of na not changed mono-filament's echo textures.

• The Mathematical Education
• /
• v.62 no.4
• /
• pp.473-490
• /
• 2023

Previous studies from domestic and abroad are accumulating information on how to reason students' continuous changes through teaching experiments. These studies deal with scenes in which students who make 'smooth reasoning' and 'chunky reasoning' construct mathematical results together in teaching experiments. However, in order to analyze their results in more detail, it is necessary to check what kind of results a student reasoning in a specific way constructs for the tasks of previous studies. According to the need for these studies, the researcher conducted a total of 14 teaching experiments on one first-year high school student who was found to make 'chunky reasoning'. In this study, it was possible to observe a scene in which a student who makes 'chunky reasoning' constructs an output similar to 'a mathematical result constructed by students with various reasoning methods(smooth reasnoning or chunky reasoning) in previous studies.' In particular, the student who participated in this study observed a consistent construction method of constructing the function of 'time-speed' from the function of 'time-distance'. The researcher expected that information on this student's distinctive construction methods would be helpful for subsequent studies.

• Science of Emotion and Sensibility
• /
• v.23 no.3
• /
• pp.103-120
• /
• 2020

This study reviewed the literature on the self-distancing method for emotion regulation. Self-distancing refers to taking a step back in dealing with one's own experiences and interpreting them in a relatively objective manner. Studies have indicated that self-distancing affects cognitive and emotional processes, which are particularly beneficial in regulating negative emotions. Therefore, this study focused on organizing previous results to summarize their meaning, assess means of measurement, and analyze possible effects. Above all, the related concepts of an observer's rational perspective and self-reflection were presented to clarify the definition of self-distancing, followed by a discussion of its measurement. Based on this, the effects of self-distancing were introduced according to their emotional, cognitive, physiological, developmental, and behavioral aspects. However, despite repeated verification of the positive effects of self-distancing, there are several inconsistencies that require consideration. Finally, we suggested the study's academic and practical implications and recommended directions for further research.

• Journal of Korea Multimedia Society
• /
• v.17 no.2
• /
• pp.132-142
• /
• 2014

Stereo camera is drawing attention as an essential sensor for future intelligence robot system since it has the advantage of acquiring not only distance but also other additive information for an object. However, it cannot match correlated point on target image for low textured region or periodic patterned region such as wall of building or room. In this paper, we propose a stereo matching technique that increase the matching performance by fusing belief propagation stereo matching algorithm and local distance measurements of 2D-laser range finder in order to overcome this kind of limitation. The proposed technique adds laser measurements by referring quad-tree based segment information on to the local-evidence of belief propagation stereo matching algorithm, and calculates compatibility function by reflecting over-segmented information. Experimental results of the proposed method using simulation and real test images show that the distance information for some low textured region can be acquired and the discontinuity of depth information is preserved by using segmentation information.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.81-89
• /
• 2018

In the present study, a numerical investigation was conducted to analyze the effect of the distance between the adjacent injectors on the characteristics of flow structure, fuel penetration, and air/fuel mixing. Numerical results were validated with experimental data using a single injection. Subsequently, the same injector geometry and properties were applied on a non-reacting flow simulation with multiple injectors. Total pressure loss, penetration height, and mixing efficiency were compared with the distance between the injectors. The results showed that each injected gas merged into a single stream, resulting in the 2D-like flow fields under the condition of short distance and lower mixing efficiency along with higher total pressure loss. When the distance between the injectors increased, total pressure loss reduced and mixing efficiency increased due to the weakening of interactions between the injected gases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1197-1205
• /
• 2007

An adaptive K-best detection scheme is proposed for MIMO systems. The proposed scheme changes the number of survivor paths, K based on the degree of the reliability of Zero-Forcing (ZF) estimates at each K-best step. The critical drawback of the fixed K-best detection is that the correct path's metric may be temporarily larger than K minimum paths metrics due to imperfect interference cancellation by the incorrect ZF estimates. Based on the observation that there are insignificant differences among path metrics (ML distances) when the ZF estimates are incorrect, we use the ratio of the minimum ML distance to the second minimum as a reliability indicator for the ZF estimates. So, we adaptively select the value of K according to the ML distance ratio. It is shown that the proposed scheme achieves the significant improvement over the conventional fixed K-best scheme. The proposed scheme effectively achieves the performance of large K-best system while maintaining the overall average computation complexity much smaller than that of large K system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.153-160
• /
• 2011

The characteristics of supersonic coaxial/off-axis jet impingements on a slanted kerf surface were experimentally studied, to investigate the role of the assist gas that removes molten materials from cut zone formed by laser machining. In this parametric study, hundreds of high-resolution schlieren images were obtained for various gas pressures, distances between nozzle exit and kerf surface, kerf widths, and alignments of off-axis nozzle. It was noticed that simply increasing the assist gas pressure was not effective in eliminating the flow separation that occurs downstream of the kerf surface. However, it was also observed that by increasing the kerf width and utilizing off-axis nozzles, the separation of the assist gas on the kerf surface can be weakened. The effect of the distance between the nozzle exit and the kerf surface on the characteristics of separation occurring on the kerf surface was found to be lower in the case of supersonic nozzles than that in the case of sonic nozzles.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.383-393
• /
• 1998

Cadmium telluride films were grown by close-spaced sublimation(CSS) technique. The effects of various deposition parameters such as ambient pressure, source- to-substrate spacings and temperatures on the growth rate and the microstructure were investigated. The growth mode of CdTe films showed a transition as the ambient pressure changed. This transition was interpreted in terms of the diffusion limited transport and the sublimation limited transport of Cd and $Te_2$ vapors. Experimental results indicated that the transition of growth mode was related with the mean free path of gas molecules. The growth rate and the microstructure of CdTe films were affected by the source type- bulk or powder. This change was due to the temperature difference at the source surface. XRD and SEM analysis showed that the growth rate was one of the main factors to determine CdTe microstructures.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.4
• /
• pp.291-299
• /
• 2008

Bisphenol A diglycidyl ether(BADGE)는 비스페놀 A와 에피클로로하이드린의 축합에 의해 만들어지는 물질로 상업용 액상 에폭시 수지의 주성분이다. 본 연구는 clusterin mRNA 발현이 BADGE의 노출된 생식기계 독성에 연관되어 있는지를 연구하기 위해 수행하였다. BADGE는 SPF Sprague-Dawley 임신 랏트에 임신 6일부터 수유기가지 하루에 한 번 0(대조군)과 375mg/kg/day를 경구 투여하였다. 수컷 새끼는 일반 사항과 몸무게, 일반 발달 지표(예, 항문과 생식기 사이의 거리, 이개개전, 절치붕출, 유두잔류, 안검개열, 고환하강, 포피박리 등)등을 관찰하였다. 대조군과 투여군에서 다섯 마리의 수컷 새끼는 출생 후 3, 6와 9주에 부검하여 부고환의 조직학적 변화 등을 관찰하였다. BADGE 375 mg/kg/day 투여군에서 항문과 생식기 사이의 거리는 대조군보다 길어지는 경향을 보였다. 출생 후 6주와 9주에서 부고환의 상대 무게는 대조군보다 약간 증가하였으나 조직학적인 변화는 관찰되지 않았다. BADGE 투여 군에서 clusterin mRNA 발현량은 대조군에 비해 3주에 56%, 6주에 57% 그리고 9주에 86% 감소하였다. 이런 결과는 랏트의 부고환에서 clusterin은 BADGE에 반응하는 유전자 중 하나일 수 있다는 가능성을 나타낸다.