• Knowledge Management Research
• /
• v.23 no.2
• /
• pp.143-168
• /
• 2022

Using Herzberg's motive hygiene theory, this study also investigated the influence of motivation factors and hygiene factors on acceptance and resistance of mobile facial recognition payment services, and the influence of consumer innovation as a parameter on acceptance and resistance from motivation factors and hygiene factors. A survey was conducted on Chinese users who had experience using mobile payment services. IBM SPSS Statistics 26 and SmartPLS 3.0 were used for statistical analysis. As a result of the analysis, the motivating factors of mobile facial recognition payment services have a positive (+) impact on acceptance, and there were no significant results on resistance. In addition, hygiene factors have been shown to have negative (-) effects on acceptance and positive (+) effects on resistance. Consumer innovation, which is a parameter in relation to motivation factors and acceptance and resistance, had a partial mediation effect, and a partial mediation effect was also seen in the relationship between hygiene factors and resistance, but no mediation effect was found in the relationship between hygiene factors and acceptance. The motivating factors found through research results such as rapidity, ubiquity, perceived usability, perceived ease of use, privacy concerns, security, status quo inertia, use barriers, and loss avoidance, which are factors of non-contact and hygiene, can be used as basic data for activating mobile facial recognition payment services.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.291-314
• /
• 2023

The concept of Mydata emerged with the expansion of the data economy. MyData aims to empower individuals by enhancing their right to self-determination over their personal data. The use of MyData is expected to enable the provision of innovative service in various fields. Since 2022, MyData has been introduced and actively used in the financial sector. In the future, not only financial institutions but also Bigtech and Fintech companies are expected to actively join and demonstrate rapid expansion. To ensure steady growth for MyData in the financial sector, it is necessary to assess acceptance behaviors from multiple perspectives. However, the majority of existing research solely focuses on positive acceptance. This study analyzed the impact of users' personal characteristics and innovation characteristics on both innovation resistance and acceptance resistance. The analysis revealed that personal and innovation characteristics contribute to an increase in distrust and innovation resistance in the MyData service. In addition, it has been confirmed that it can lead to actions such as delayed acceptance and refusal to accept. The results of this study offer both theoretical and practical insights into user behavior within the MyData service market.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1134-1162
• /
• 2013

The purpose of this paper is to provide an innovation strategy for a leading industrial company. We analyze the process of a shift in industrial leadership using the shipbuilding industry as a case study. This paper explains that the three core factors of decline are immobilization, lack of innovation for major products, and organizational inertia. This study presents that the leader of a market is not decided by strong competitiveness, but by quick reaction to major customers' needs, and that out-of-date strategies do not contribute to maintaining leadership. As a result of this study, it shows that the leading Korean industrial companies shall establish a new innovation-oriented and customer-oriented management system that is flexible enough to anticipate and respond to the changes in new competitive environments. These findings contribute to the formulation of new strategies for other manufacturing industries in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.812-818
• /
• 2003

This paper presents a developed outside rotor type induction motor for the fan. Nearly all of the induction motors consist of two parts, rotor and stator, and the position of rotor is generally inside of stator. However, the rotor of the developed induction motor is located outside of stator. It is believed that the outside rotor type induction motor is suitable for the fan due to its large inertia, that is, it is considered that the change of air flow rate resulting from input power or load fluctuation is reduced. In this paper, the two tests which are suitable to obtain the electrical parameters of the outside rotor type induction motor were described, then various parameters of outside rotor type induction motor were measured. These are the locked rotor test and no load test. By using these tests, it was possible to determine the parameters which are presented in the steady-state equivalent-circuit of the outside rotor type induction motor. Load test of induction motor was carried out using a dynamometer and the torque-speed curve was obtained. It is believed that the results of this paper can be used for the development of the outside rotor type induction motor.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.3
• /
• pp.101-106
• /
• 2020

The utilization of virtual reality is increasing not only in games but also in medical care such as rehabilitation. Due to the convenience, the motion of the upper limb is detected using a non-contact method using video or a handheld type mouse, etc. In this paper, we implemented a glove which can measure finger movements and upper limb movements by using flex sensors whose resistance value changes according to the degree of folding and inertial sensors which can obtain direction information in space. We showed the upper arm movements including finger movements with signals obtained from the implemented glove on the open software platform, Processing. The sensitivity of each finger movement was 0.5deg, and the sensitivity of the upper limb motion was 0.6deg.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.135-140
• /
• 1998

Drag reduction produced by dilute solution of water soluble ionic polymer-surfactant complex under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study. Three different molecular weights of polyacrylic acid(PAA) were adopted as drag reducing additives, and distilled water was used as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, molecular expansions and flexibility, rotating speed of the disk and polymer concentration. Specific considerations were put on conformational difference between surfactant and polymer, and effect of pH on ionic polymer possessing various molecular conformation through pH. The complex of ionic polymer and surfactant(Sodium Dodecyl Sulfate) behaves like a large polyelectrolyte. Surfactant changes the polymer conformation and then increases the dimension of the polymer. The radius of gyration, hydrodynamic volume and relative viscosity of the polymer-surfactant system are observed to be greater than those of polymer itself. Such surfactant-polymer complex has enhanced drag reduction properties.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.210-215
• /
• 2004

The dynamic model of ac servo motor is influenced very much due to rotor resistance change and nonlinear characteristic. By using the sliding mode control the dynamic behavior of system can be made insensitive to plant parameter change and external disturbance. This paper describes the application of the sliding mode control for position control of ac servo motor. The control scheme is derived and designed. A design method based on external load parameters has been developed for the robust control of ac induction servo drive. The proposed control scheme are given based on the variable structure controller and slip frequency vector control. Simulated results are given to verify the proposed design method by adoption of sliding mode and show robust control for a change of shaft initial J, viscous friction B and torque disturbance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.82-90
• /
• 2019

We propose an equivalent model of a sintered metal mesh filter calculated by Ergun's equation and polynomial regression for the CFD analysis of breakaway devices at a hydrogen fueling station. CFD analysis of filters that cause high pressure loss is essential because breakaway devices in high-pressure hydrogen conditions require low pressure loss. A differential pressure experiment with a filter was performed in a low-pressure air condition considering similarities. An equivalent model was developed by deriving the resistance value by the polynomial regression using the experimental results. The results of CFD analysis using the equivalent model show that there was almost no error in the operating condition of the breakaway device compared to the experimental results. Through this work, we believe that the proposed equivalent model of a filter can be applied to the analysis of breakaway devices in hydrogen fueling stations. We will study how to optimize the shape and position of the filter in breakaway devices using the developed equivalent model.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.689-697
• /
• 2002

The dynamic loads and load-point displacements of concrete three-point bend (TPB) specimens had been measured. The average crack velocities measured with strain gages were 0.16 ㎜/sec ∼ 66 m/sec. The fracture energy for crack extension was determined from the difference of the kinetic energy for the load-point velocity and the strain energy without permanent deformation from the measure external work. For all crack velocities, there were micro-cracking for 23 ㎜ crack extension, stable cracking for 61 ㎜ crack extension at the maximum strain energy, and then unstable cracking. The unstable crack extension was arrested at 80 ㎜ crack extension except the tests of 66 m/sec crack velocity. The tests less than 13 ㎜/sec crack velocity and faster than 1.9 m/sec showed static and dynamic fracture behaviors, respectively. In spite of much difference of the load and load-point displacement relations for the crack velocities, the crack velocities of dynamic tests did not affect on fracture energy rate during the stable crack extension due to the reciprocal action of kinetic force, crack extension and strain energy. During stable crack extension, the maximum fracture resistances of the dynamic tests was 147％ larger than that of the static tests.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.28-36
• /
• 2006

In this paper, an algorithm to classify the 4 motions of arm and a control system to position control the prosthesis are studied. To classify the 4 motions, we use flex sensors which is electrical resistance type sensor that can measure warp of muscle. The flex sensors are attached to the biceps brchii muscle and coracobrachialis muscle and the sensor signals are passed the sensing system. 4 motion of the forearm - flexion and extension, the pronation and supination are classified from this. Also position of forearm is measured from the classified signals. Finally, A two D.O.F prosthesis arm with RC servo-motor is designed to verify the validity of the algorithm. At this time, fuzzy controller is used to reduce the position error by rotary inertia and noise. From the experiment, the position error had occurred within about 5 degree.