• Journal of Korea Port Economic Association
• /
• v.25 no.1
• /
• pp.15-28
• /
• 2009

The purpose of this paper is to show the empirical extraction way of benchmarking ports for overcoming the shortcoming which the traditional DEA method has by using 20 Korean ports in 2003 for 2 inputs (birthing capacity, cargo handling capacity) and 2 outputs(Export and Import Quantity, Number of Ship Calls). Because DEA method has produced the limited set of efficient units which are reference to inefficient units respective of their differences in efficiency scores, it is necessary to adopt the more feasible benchmarking information according to the path analysis(tier or stratification). The core empirical results of this paper are as follows. Benchmarking ports against inefficient ports according to the tier analysis are that Masan Port(Janghang$\rightarrow$Jeju$\rightarrow$Seogoipo$\rightarrow$Yeosu), Jinhae Port(Janghang$\rightarrow$Mogpo$\rightarrow$Seogoipo$\rightarrow$Wando), Pohang&DonghaePort(Janghang$\rightarrow$Samcheonpo$\rightarrow$Pyungtag$\rightarrow$Samcheog), and Sogcho Port(Janghang$\rightarrow$Mogpo$\rightarrow$Seogoipo$\rightarrow$Wando). The policy implication to the Korean seaports and planners is that Korean seaports should introduce the new methods like Tier analysis of this paper for evaluating the port performance and enhancing the efficiency in short term, mid term, and long term according to the tier 3 stage, the tier 2 stage, and the tier 1 stage with original DEA stage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.4
• /
• pp.19-28
• /
• 2020

The Urban Heat Island (UHI) Effect has intensified due to urbanization and heat management at the urban level is treated as an important issue. Green space improvement projects and environmental policies are being implemented as a way to alleviate Urban Heat Islands. Several studies have been conducted to analyze the correlation between urban green areas and heat with linear regression models. However, linear regression models have limitations explaining the correlation between heat and the multitude of variables as heat is a result of a combination of non-linear factors. This study evaluated the Heat Island alleviating effects in Seoul during the summer by using a deep neural network model methodology, which has strengths in areas where it is difficult to analyze data with existing statistical analysis methods due to variable factors and a large amount of data. Wide-area data was acquired using Landsat 8. Seoul was divided into a grid (30m × 30m) and the heat island reduction variables were enter in each grid space to create a data structure that is needed for the construction of a deep neural network using ArcGIS 10.7 and Python3.7 with Keras. This deep neural network was used to analyze the correlation between land surface temperature and the variables. We confirmed that the deep neural network model has high explanatory accuracy. It was found that the cooling effect by NDVI was the greatest, and cooling effects due to the park size and green space proximity were also shown. Previous studies showed that the cooling effects related to park size was 2℃-3℃, and the proximity effect was found to lower the temperature 0.3℃-2.3℃. There is a possibility of overestimation of the results of previous studies. The results of this study can provide objective information for the justification and more effective formation of new urban green areas to alleviate the Urban Heat Island phenomenon in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.1-9
• /
• 2014

Within the urban area, over the past decades unused land and public land such as streams and road sides have given urban residents a space for farming (urban farms). However, because this use is illegal, farming in unused and public lands could cause conflicts between urban farm users and land owners, degrade the quality of the urban landscape and contaminate the environment. Therefore, the purpose of this study is to provide a way of legalizing these farming practices that have been cultivated in unused urban areas and public lands. This study analyzed the status of distribution and use of the urban farms that have been scattered around urban areas in many different forms. The survey was conducted through on-the-spot investigation and in-person interviews with farm users and those who were operating weekend farms in the Siji region of Daegu Metropolitan City. According to the results of this study, urban farms were mainly found in green areas that were easily accessible from residential districts and prohibited from development. It was also revealed that the nearer to the border of the residential districts the sites of urban farms were, the larger the number of urban farms was. When it comes to the type of land use, although the proportion of urban farms located in farmlands was very high, the proportion of those located on state-owned lands such as roads, railroads and streams was also high, over 1/3 of that of the former sites. Among the users of urban farms, the percentage of users who were farming private-owned land for free was highest and that of state-owned land without permission ranked second. Most people who were farming unused lands or state-owned lands without permission, such as streams, roads, railroads, were the elderly. This shows the potential of farms in urban area as leisure activities spaces for the elderly. Even though this study has limitations in that the survey target area was selected in a certain area and the sizes of all urban farms were not measured by surveying apparatus and instruments, it helps to determine the characteristics of use and distribution associated with the spaces of urban farming, and to raise the importance and necessity of legalizing urban farms cultivated illegally in public land.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.133-144
• /
• 2004

A model and a measure which can evaluate the risk of rear end collision are developed. Most traffic accidents involve multiple causes such as the human factor, the vehicle factor, and the highway element at any given time. Thus, these factors should be considered in analyzing the risk of an accident and in developing safety models. Although most risky situations and accidents on the roads result from the poor response of a driver to various stimuli, many researchers have modeled the risk or accident by analyzing only the stimuli without considering the response of a driver. Hence, the reliabilities of those models turned out to be low. Thus in developing the model behaviors of a driver, such as reaction time and deceleration rate, are considered. In the past, most studies tried to analyze the relationships between a risk and an accident directly but they, due to the difficulty of finding out the directional relationships between these factors, developed a model by considering these factors, developed a model by considering indirect factors such as volume, speed, etc. However, if the relationships between risk and accidents are looked into in detail, it can be seen that they are linked by the behaviors of a driver, and depending on drivers the risk as it is on the road-vehicle system may be ignored or call drivers' attention. Therefore, an accident depends on how a driver handles risk, so that the more related risk to and accident occurrence is not the risk itself but the risk responded by a driver. Thus, in this study, the behaviors of a driver are considered in the model and to reflect these behaviors three concepts related to accidents are introduced. And safe stopping distance and accident occurrence probability were used for better understanding and for more reliable modeling of the risk. The index which can represent the risk is also developed based on measures used in evaluating noise level, and for the risk comparison between various situations, the equivalent risk level, considering the intensity and duration time, is developed by means of the weighted average. Validation is performed with field surveys on the expressway of Seoul, and the test vehicle was made to collect the traffic flow data, such as deceleration rate, speed and spacing. Based on this data, the risk by section, lane and traffic flow conditions are evaluated and compared with the accident data and traffic conditions. The evaluated risk level corresponds closely to the patterns of actual traffic conditions and counts of accident. The model and the method developed in this study can be applied to various fields, such as safety test of traffic flow, establishment of operation & management strategy for reliable traffic flow, and the safety test for the control algorithm in the advanced safety vehicles and many others.

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.41-72
• /
• 2018

In the division of labor (or teamwork) in medicine, the responsibility of medical and nursing staff should be separated or distributed to justify negligent criminal offenses. The present work refers to the standards by which the due diligence and responsibility of the individual persons are to be determined and delimited. In this context, it has been proven that objective theory as a measure of due diligence is appropriate. From a moral point of view, when assessing due diligence, it makes sense to impose greater individual or higher performance demands on the perpetrator, but law and order require that due diligence should result from socially relevant human behavior. To give objective measure of negligence and to provide the highest level of personal responsibility, so that man can not be burdened too much responsibility and it is accordingly with an equality theorem. Afterwards some points are presented, which should be considered in a concrete fact in the determination of the medical negligence. Medical action has specific characteristics such as professionalism, discretionary and exclusive, unbalance of information. These characteristics distinguish medical actions from general negligence. The general level of knowledge, the urgency, working condition and working environment of the medical facility, duration of the professional practice, assessment of the medical activity are crucial in this context. As a standard of delineation of due diligence, I have used the permitted risk and the principle of trust. In the horizontal division of labor, the principle of trust applies. The principle of trust applies in principle in cases of division of labor interaction, when doctors in the same hospital exercise their own specific occupational field or everyone works in another hospital. However, this is not true for every case. In the vertical division of labor, the principle of trust does not apply and the senior physician can not trust the assistant doctors. In this case, the principle of trust is converted into a duty of supervision for assistant doctors by the senior physician. This supervision requirement could be used as a random check.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.4
• /
• pp.336-343
• /
• 2000

Purpose: Thallous-201 chloride produced at Korea Cancer Center Hospital(KCCH) is used in detecting cardiovascular disease and cancer. Thallium impurity can cause emesis, catharsis and nausea, so the presence of thallium and other metal impurities should be determined. According to USP and KP, their amounts must be less than 2 ppm in thallium and 5 ppm in total. In this study, the detection method of trace amounts of metal impurities in $[^{201}Tl]$TICI injection with polarography was optimized without environmental contamination. Materials and Methods: For the detection of metal impurities, Osteryoung Square Wave Stripping Voltammetry method was used in Bio-Analytical System (BAS) 50W polarograph. The voltammetry was composed of Dropping Mercury Electrode (DME) as a working electrode, Ag/AgCl as a reference electrode and Pt wire as a counter electrode. Square wave stripping method, which makes use of formation and deformation of amalgam, was adopted to determine the metal impurities, and pH 7 phosphate buffer was used as supporting electrolyte. Results: Tl, Cu and Pb in thallous-201 chloride solution were detected by scanning from 300 mV to -800 mV Calibration curves were made by using $TINO_3,\;CuSO_4\;and\;Pb(NO_3){_2}$ as standard solutions. Tl was confirmed at -450 mV peak potential and Cu at -50 mV Less than 2 ppm of Tl and Cu was detected and Pb was not detected in KCCH-produced thallous-201 chloride injection. Conclusion: Detection limit of thallium and copper is approximately 50 ppb with this method. As a result of this experiment, thallium and other metal impurities in thallous-201 chloride injection, produced at Korea Cancer Center Hospital, are in the regulation of USP and KP Polarograph could be applied for the determination of metal impurities in the quality control of radiopharmaceuticals conveniently without environmental contamination.

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.99-128
• /
• 2018

The cultivation area of rice as staple grains is decreasing in the domestic situation in Korea. Import volume of a duty in foreign rice is 409,000 tons for a year regardless increasing of production per unit area and decreasing of rice consumption. The total stock of rice is increasing cumulatively despite the effort for production mediation of rice. Therefore, maintenance of cultivation area and reduction of production are necessary for national foodstuffs security problems. Development of environment-friendly and low-carbon technology as alternative of global warming and aging of farm labor power is very important responsibility for descendants with creation of sustainable agriculture environment. As alternative for demand and supply stabilization of rice from all angles, first stage: extension of environment-friendly cultivation area as 17% Jeollanam-do level with maintenance of cultivation area under the present circumstances, second stage: extension of environment-friendly cultivation area as 25%, third stage: extension of environment-friendly cultivation area as 35%. From above mentioned scenario, reduction of rice production (60,000 tons), increases of production cost (59,200,000,000 Won), and reduction of income (201,500,000,000 Won) are estimated in first stage. Reduction of rice production (90,000 tons), increases of production cost (122,100,000,000 Won), and reduction of income (313,700,000,000 Won) are estimated in second stage. Reduction of rice production (380,000 tons), increases of production cost (222,000,000,000 Won), and reduction of income (464,500,000,000 Won) are estimated in third stage. From analysis results for partial tillage in transplanting cultivation complex (10ha), rice production is decreased 1.3~1.5 ton by complex. Production cost of rice is decreased and increases of income cultivation type. Gradual extension of environment-friendly agriculture and low-carbon partial tillage could be expected for environment maintenance of the territorial integrity, confidence of consumer, and high-efficiency of low-cost.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2014

A simultaneous determination was developed for 9 aminoglycoside antibiotics (amikacin, apramycin, dihydrostreptomycin, gentamicin, hygromycin B, kanamycin, neomycin, spectinomycin, and streptomycin) in meat by liquid chromatography tandem mass spectrometry (LC-MS/MS). Each parameter was established by multiple reaction monitoring in positive ion mode. The developed method was validated for specificity, linearity, accuracy, and precision based on CODEX validation guideline. Linearity was over 0.98 with calibration curves of the mixed standards. Recovery of 9 aminoglycosides ranged on 60.5~114% for beef, 60.1~112% for pork and 63.8~131% for chicken. The limit of detection (LOD) and limit of quantification (LOQ) were 0.001~0.009 mg/kg and 0.006~0.03 mg/kg, respectively in livestock products including beef, pork and chicken. This study also performed survey of residual aminoglycoside antibiotics for 193 samples of beef, pork and chicken collected from 9 cities in Korea. Aminoglycosides were not found in any of the samples.

• Journal of Distribution Science
• /
• v.10 no.6
• /
• pp.27-37
• /
• 2012

Many studies have focused on the importance of organizational integration when companies try to achieve growth through mergers and acquisitions (M&A). However, there has been little research that focuses on the new branding or customer base integration of the M&A process, despite the fact that this integration is very important for achieving M&A goals and business performance in industries such as retail. The purpose of this study is to provide an M&A case study of the retail industry, focused especially on the new branding and customer integration of two department stores. This study examined key integration processes in terms of brand name and membership systems of both companies by examining how the merged company achieved its new branding and the integration of its membership systems. The methodology of this research is the case study, which is used in both normative and empirical studies for distribution research in Korea. This research analyzes the case of both new branding and customer membership systems of the two companies. The new branding initiatives of this case centered on decision making including brand extension and brand naming. The customer membership integration of the two companies is analyzed on the basis of the customer reward programs that include both financial and service rewards. This study shows the success factors of new branding and customer integration in the M&A process in terms of achieving marketing goals and business performance as follows: First, companies should identify the integration areas by analyzing the brand and membership of both companies and make a balanced decision for both the customer and company. Second, the goals of new branding and membership integration in the M&A process should not emphasize business efficiency from a short-term perspective but rather should consider brand power and business synergy from a long-term perspective. Third, the post-merger integration process of the brand or customer areas requires not only the organized execution of integration tasks but also follow-up programs for changes in business strategy and marketing-related programs to realize the synergy effects of integrated organization. Although this study provides a detailed review and analysis of the new branding and customer integration processes in post-merger integration and in identifying the primary decision-making areas of these processes, there are some limitations requiring further research that may overcome or compensate for these limitations. The suggested future research areas are as follows: First, since this research is a case study of only one M&A, it makes few theoretical contributions such as new propositions or theories or possibilities for generalization. This limitation can be overcome through further research using multiple cases, which may lead to new propositions. Second, the methodology of this study lacks sufficient rigor in terms of its analytic approach because this case study was developed and analyzed descriptively. Further research is needed to compensate for these limitations, such as using a theory-based approach or comparative analysis approach that makes case analysis more systematic.

• Journal of Distribution Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 2010

The ICT(information & communication technology) led to a dramatic change of floral distribution service, a phase of competition between wholesales and retail stores, and distribution channels in floral industry. It was expected that a role of the intermediaries in this industry would have reduced due to the improvement of transaction process by ICT. However, the ICT made to overcome a regional limit of the floral retail distribution service leading to an increase in sales and enlargement of the stores. And even it made possible to bring out another type of intermediaries such as private associations. This case study focuses on what kinds of efforts the floral wholesale distributors have made to enable a distribution process more smoothly between the wholesale distributors and retail stores through the information system, and what the failure factors in adopting the information system have been. This paper is also to examine how the wholesale distributors have changed themselves to gain dominant positions in distribution channels. As a result of the study, it was found that the intermediaries mostly failed in successfully achieving the distribution channel innovation through the information system because of several main reasons. FLOMARKET Inc. tried to innovate a distribution channel to obtain high quality goods through consolidating a wholesale distribution market in that segregated both floral joint market from free markets. after implementing the information system with consideration of the failure factors, FLOMARKET Inc. was able to minimize goods in stock and make a major purchase of various goods. In addition, it made a possible pre-ordering process and an exact calculation of purchasing goods so they could provide their products with market price in real time, which helped for the company to gain credits from their customers. Also, FLOMARKET Inc. established the information system which well suited to its business stage in order to deal with a rapidly changing distribution environment. It's so obvious that the transaction processing system of FLOMARKET Inc. definitely helped to share information among traders more seamlessly and smoothly in realtime, standardize goods, and make a transaction process clearer. Besides, the transaction information helped the wholesale distributors and retail stores to make more strategic decisions in their business because through the system they enabled to gather the marketing intelligence information more easily and convenient. If we understand that the floral distribution market is characterized by the low IT- based industry, it's worth to examine a case study proving that the information system actually increases the productivity of the transaction process in the floral industry.